In ud-mailgate use an empty envelope from when sending error messages
[mirror/userdir-ldap.git] / ud-mailgate
index f705497..90069c8 100755 (executable)
@@ -3,11 +3,13 @@
 
 #   Prior copyright probably rmurray, troup, joey, jgg -- weasel 2008
 #   Copyright (c) 2008 Peter Palfrader <peter@palfrader.org>
+#   Copyright (c) 2008 Joerg Jaspert <joerg@debian.org>
 
-import userdir_gpg, userdir_ldap, sys, traceback, time, ldap, os;
-import pwd
-from userdir_gpg import *;
-from userdir_ldap import *;
+import userdir_gpg, userdir_ldap, sys, traceback, time, ldap, os, commands
+import pwd, tempfile
+
+from userdir_gpg import *
+from userdir_ldap import *
 
 # Error codes from /usr/include/sysexits.h
 ReplyTo = ConfModule.replyto;
@@ -15,6 +17,9 @@ PingFrom = ConfModule.pingfrom;
 ChPassFrom = ConfModule.chpassfrom;
 ChangeFrom = ConfModule.changefrom;
 ReplayCacheFile = ConfModule.replaycachefile;
+SSHFingerprintFile = ConfModule.fingerprintfile
+
+UUID_FORMAT = '[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}'
 
 EX_TEMPFAIL = 75;
 EX_PERMFAIL = 65;      # EX_DATAERR
@@ -26,6 +31,18 @@ mailRHSBL = {}
 mailWhitelist = {}
 SeenList = {}
 DNS = {}
+SudoPasswd = {}
+
+SSHFingerprint = re.compile('^(\d+) ([0-9a-f\:]{47}) (.+)$')
+SSHRSA1Match = re.compile('^^(.* )?\d+ \d+ \d+')
+
+GenderTable = {"male": 1,
+              "1": 1,
+              "female": 2,
+              "2": 2,
+              "unspecified": 9,
+              "9": 9,
+};
 
 ArbChanges = {"c": "..",
              "l": ".*",
@@ -45,6 +62,7 @@ ArbChanges = {"c": "..",
              "mailGreylisting": "^(TRUE|FALSE)$",
              "mailCallout": "^(TRUE|FALSE)$",
              "VoIP": ".*",
+             "gender": "^(1|2|9|male|female|unspecified)$",
 };
 
 DelItems = {"c": None,
@@ -64,7 +82,6 @@ DelItems = {"c": None,
             "jpegPhoto": None,
             "dnsZoneEntry": None,
            "sshRSAAuthKey": None,
-           "sshDSAAuthKey": None,
             "birthDate" : None,
             "mailGreylisting": None,
             "mailCallout": None,
@@ -75,6 +92,7 @@ DelItems = {"c": None,
             "VoIP": None,
             };
 
+
 # Decode a GPS location from some common forms
 def LocDecode(Str,Dir):
    # Check for Decimal degrees, DGM, or DGMS
@@ -153,6 +171,12 @@ def DoArbChange(Str,Attrs):
    if re.match(ArbChanges[attrName],G[1]) == None:
       raise Error, "Item does not match the required format"+ArbChanges[attrName];
 
+   value = G[1];
+   if attrName == 'gender':
+      if G[1] not in GenderTable:
+         raise Error, "Gender not found in table"
+      value = GenderTable[G[1]]
+
 #   if attrName == 'birthDate':
 #      (re.match("^([0-9]{4})([01][0-9])([0-3][0-9])$",G[1]) {
 #    $bd_yr = $1; $bd_mo = $2; $bd_day = $3;
@@ -176,8 +200,8 @@ def DoArbChange(Str,Attrs):
 #  } elsif (not defined($query->param('birthdate')) or $query->param('birthdate') =~ /^\s*$/) {
 #    $bd_ok = 1;
 #  }
-   Attrs.append((ldap.MOD_REPLACE,attrName,G[1]));
-   return "Changed entry %s to %s"%(attrName,G[1]);
+   Attrs.append((ldap.MOD_REPLACE,attrName,value));
+   return "Changed entry %s to %s"%(attrName,value);
 
 # Handle changing a set of arbitary fields
 #  <field>: value
@@ -218,16 +242,89 @@ def DoPosition(Str,Attrs):
    Attrs.append((ldap.MOD_REPLACE,"longitude",sLong));
    return "Position set to %s/%s (%s/%s decimal degrees)"%(sLat,sLong,Lat,Long);
 
+# Load bad ssh fingerprints
+def LoadBadSSH():
+   f = open(SSHFingerprintFile, "r")
+   bad = []
+   FingerprintLine = re.compile('^([0-9a-f\:]{47}).*$')
+   for line in f.readlines():
+      Match = FingerprintLine.match(line)
+      if Match is not None:
+         g = Match.groups()
+         bad.append(g[0])
+   return bad
+
 # Handle an SSH authentication key, the line format is:
 #  [options] 1024 35 13188913666680[..] [comment]
-def DoSSH(Str,Attrs):
+def DoSSH(Str, Attrs, badkeys, uid):
    Match = SSH2AuthSplit.match(Str);
    if Match == None:
-      Match = re.compile('^1024 (\d+) ').match(Str)
+      return None;
+   g = Match.groups()
+   typekey = g[1]
+   if Match == None:
+      Match = SSHRSA1Match.match(Str)
       if Match is not None:
-         return "SSH1 keys not supported anymore"
+         return "RSA1 keys not supported anymore"
       return None;
-   
+
+   (fd, path) = tempfile.mkstemp(".pub", "sshkeytry", "/tmp")
+   f = open(path, "w")
+   f.write("%s\n" % (Str))
+   f.close()
+   cmd = "/usr/bin/ssh-keygen -l -f %s < /dev/null" % (path)
+   (result, output) = commands.getstatusoutput(cmd)
+   os.remove(path)
+   if (result != 0):
+      raise Error, "ssh-keygen -l invocation failed!\n%s\n" % (output)
+
+
+   # Head
+   Date = time.strftime("%a, %d %b %Y %H:%M:%S +0000",time.gmtime(time.time()))
+   ErrReplyHead = "From: %s\nCc: %s\nReply-To: %s\nDate: %s\n" % (os.environ['SENDER'],os.environ['SENDER'],ReplyTo,Date)
+   Subst = {}
+   Subst["__ADMIN__"] = ReplyTo
+   Subst["__USER__"] = uid
+
+   Match = SSHFingerprint.match(output)
+   g = Match.groups()
+
+   if int(g[0]) < 1024:
+      try:
+         # Body
+         Subst["__ERROR__"] = "SSH keysize %s is below limit 1024" % (g[0])
+         ErrReply = TemplateSubst(Subst,open(TemplatesDir+"admin-info","r").read())
+
+         Child = os.popen("/usr/sbin/sendmail -t","w")
+         Child.write(ErrReplyHead)
+         Child.write(ErrReply)
+         if Child.close() != None:
+            raise Error, "Sendmail gave a non-zero return code"
+      except:
+         sys.exit(EX_TEMPFAIL)
+
+      # And now break and stop processing input, which sends a reply to the user.
+      raise Error, "SSH keys must have at least 1024 bits, processing halted, NOTHING MODIFIED AT ALL"
+   elif g[1] in badkeys:
+      try:
+         # Body
+         Subst["__ERROR__"] = "SSH key with fingerprint %s known as bad key" % (g[1])
+         ErrReply = TemplateSubst(Subst,open(TemplatesDir+"admin-info","r").read())
+
+         Child = os.popen("/usr/sbin/sendmail -t","w")
+         Child.write(ErrReplyHead)
+         Child.write(ErrReply)
+         if Child.close() != None:
+            raise Error, "Sendmail gave a non-zero return code"
+      except:
+         sys.exit(EX_TEMPFAIL)
+
+      # And now break and stop processing input, which sends a reply to the user.
+      raise Error, "Submitted SSH Key known to be bad and insecure, processing halted, NOTHING MODIFIED AT ALL"
+
+   if (typekey == "dss"):
+      return "DSA keys not accepted anymore"
+
    global SeenKey;
    if SeenKey:
      Attrs.append((ldap.MOD_ADD,"sshRSAAuthKey",Str));
@@ -353,6 +450,73 @@ def DoRBL(Str,Attrs):
    SeenList[Key] = 1;
    return "%s replaced with %s" % (Key,Host)
 
+# Handle a ConfirmSudoPassword request
+def DoConfirmSudopassword(Str):
+   Match = re.compile('^confirm sudopassword ('+UUID_FORMAT+') ([a-z0-9.,*]+) ([0-9a-f]{40})$').match(Str)
+   if Match == None:
+      return None
+
+   uuid = Match.group(1)
+   hosts = Match.group(2)
+   hmac = Match.group(3)
+
+   global SudoPasswd
+   SudoPasswd[uuid] = (hosts, hmac)
+   return "got confirm for sudo password %s on host(s) %s, auth code %s" % (uuid,hosts, hmac)
+
+def FinishConfirmSudopassword(l, uid, Attrs):
+   global SudoPasswd
+   result = "\n"
+
+   res = l.search_s(BaseDn,ldap.SCOPE_ONELEVEL,"uid="+uid, ['sudoPassword']);
+   if len(res) != 1:
+      raise Error, "Not exactly one hit when searching for user"
+   if res[0][1].has_key('sudoPassword'):
+      inldap = res[0][1]['sudoPassword']
+   else:
+      inldap = []
+
+   newldap = []
+   for entry in inldap:
+      Match = re.compile('^('+UUID_FORMAT+') (confirmed:[0-9a-f]{40}|unconfirmed) ([a-z0-9.,*]+) ([^ ]+)$').match(entry)
+      if Match == None:
+         raise Error, "Could not parse existing sudopasswd entry"
+      uuid = Match.group(1)
+      status = Match.group(2)
+      hosts = Match.group(3)
+      cryptedpass = Match.group(4)
+
+      if SudoPasswd.has_key(uuid):
+         confirmedHosts = SudoPasswd[uuid][0]
+         confirmedHmac = SudoPasswd[uuid][1]
+         if status.startswith('confirmed:'):
+            if status == 'confirmed:'+make_passwd_hmac('password-is-confirmed', 'sudo', uid, uuid, hosts, cryptedpass):
+               result = result + "Entry %s for sudo password on hosts %s already confirmed.\n"%(uuid, hosts)
+            else:
+               result = result + "Entry %s for sudo password on hosts %s is listed as confirmed, but HMAC does not verify.\n"%(uuid, hosts)
+         elif confirmedHosts != hosts:
+            result = result + "Entry %s hostlist mismatch (%s vs. %s).\n"%(uuid, hosts, confirmedHosts)
+         elif make_passwd_hmac('confirm-new-password', 'sudo', uid, uuid, hosts, cryptedpass) == confirmedHmac:
+            result = result + "Entry %s for sudo password on hosts %s now confirmed.\n"%(uuid, hosts)
+            status = 'confirmed:'+make_passwd_hmac('password-is-confirmed', 'sudo', uid, uuid, hosts, cryptedpass)
+         else:
+            result = result + "Entry %s for sudo password on hosts %s HMAC verify failed.\n"%(uuid, hosts)
+         del SudoPasswd[uuid]
+
+      newentry = " ".join([uuid, status, hosts, cryptedpass])
+      if len(newldap) == 0:
+         newldap.append((ldap.MOD_REPLACE,"sudoPassword",newentry))
+      else:
+         newldap.append((ldap.MOD_ADD,"sudoPassword",newentry))
+
+   for entry in SudoPasswd:
+      result = result + "Entry %s that you confirm is not listed in ldap."%(entry)
+
+   for entry in newldap:
+      Attrs.append(entry)
+
+   return result
+
 # Handle an [almost] arbitary change
 def HandleChange(Reply,DnRecord,Key):
    global PlainText;
@@ -361,6 +525,7 @@ def HandleChange(Reply,DnRecord,Key):
    Result = "";
    Attrs = [];
    Show = 0;
+   CommitChanges = 1
    for Line in Lines: 
       Line = Line.strip()
       if Line == "":
@@ -370,37 +535,49 @@ def HandleChange(Reply,DnRecord,Key):
       Result = Result + "> "+Line+"\n";
       try:
          if Line == "show":
-           Show = 1;
-          Res = "OK";
+            Show = 1;
+            Res = "OK";
          else:
-           Res = DoPosition(Line,Attrs) or DoDNS(Line,Attrs,DnRecord) or \
-                 DoArbChange(Line,Attrs) or DoSSH(Line,Attrs) or \
-                DoDel(Line,Attrs) or DoRBL(Line,Attrs);
+            badkeys = LoadBadSSH()
+            Res = DoPosition(Line,Attrs) or DoDNS(Line,Attrs,DnRecord) or \
+                  DoArbChange(Line,Attrs) or DoSSH(Line,Attrs,badkeys,GetAttr(DnRecord,"uid")) or \
+                  DoDel(Line,Attrs) or DoRBL(Line,Attrs) or DoConfirmSudopassword(Line)
       except:
          Res = None;
          Result = Result + "==> %s: %s\n" %(sys.exc_type,sys.exc_value);
-        
+
       # Fail, if someone tries to send someone elses signed email to the
       # daemon then we want to abort ASAP.
       if Res == None:
-         Result = Result + "Command is not understood. Halted\n";
+         CommitChanges = 0
+         Result = Result + "Command is not understood. Halted - no changes committed\n";
          break;
       Result = Result + Res + "\n";
 
    # Connect to the ldap server
-   l = ldap.open(LDAPServer);
+   l = connectLDAP()
    F = open(PassDir+"/pass-"+pwd.getpwuid(os.getuid())[0],"r");
    AccessPass = F.readline().strip().split(" ")
    F.close();
 
-   # Modify the record
    l.simple_bind_s("uid="+AccessPass[0]+","+BaseDn,AccessPass[1]);
    oldAttrs = l.search_s(BaseDn,ldap.SCOPE_ONELEVEL,"uid="+GetAttr(DnRecord,"uid"));
    if ((GetAttr(oldAttrs[0],"userPassword").find("*LK*") != -1) 
        or GetAttr(oldAttrs[0],"userPassword").startswith("!")):
       raise Error, "This account is locked";
-   Dn = "uid=" + GetAttr(DnRecord,"uid") + "," + BaseDn;
-   l.modify_s(Dn,Attrs);
+
+   if CommitChanges == 1: # only if we are still good to go
+      try:
+         Res = FinishConfirmSudopassword(l, GetAttr(DnRecord,"uid"), Attrs)
+         Result = Result + Res + "\n";
+      except Error, e:
+         CommitChanges = 0
+         Result = Result + "FinishConfirmSudopassword raised an error (%s) - no changes committed\n"%(e);
+
+   # Modify the record
+   if CommitChanges == 1:
+      Dn = "uid=" + GetAttr(DnRecord,"uid") + "," + BaseDn;
+      l.modify_s(Dn,Attrs);
 
    Attribs = "";
    if Show == 1:
@@ -408,7 +585,7 @@ def HandleChange(Reply,DnRecord,Key):
       if len(Attrs) == 0:
          raise Error, "User not found"
       Attribs = GPGEncrypt(PrettyShow(Attrs[0])+"\n","0x"+Key[1],Key[4]);
-      
+
    Subst = {};
    Subst["__FROM__"] = ChangeFrom;
    Subst["__EMAIL__"] = EmailAddress(DnRecord);
@@ -459,7 +636,7 @@ def HandleChPass(Reply,DnRecord,Key):
    Reply = Reply + TemplateSubst(Subst,open(TemplatesDir+"passwd-changed","r").read());
    
    # Connect to the ldap server
-   l = ldap.open(LDAPServer);
+   l = connectLDAP()
    F = open(PassDir+"/pass-"+pwd.getpwuid(os.getuid())[0],"r");
    AccessPass = F.readline().strip().split(" ")
    F.close();
@@ -472,7 +649,8 @@ def HandleChPass(Reply,DnRecord,Key):
       raise Error, "This account is locked";
 
    # Modify the password
-   Rec = [(ldap.MOD_REPLACE,"userPassword","{crypt}"+Pass)];
+   Rec = [(ldap.MOD_REPLACE,"userPassword","{crypt}"+Pass),
+          (ldap.MOD_REPLACE,"shadowLastChange",str(int(time.time()/24/60/60)))];
    Dn = "uid=" + GetAttr(DnRecord,"uid") + "," + BaseDn;
    l.modify_s(Dn,Rec);
 
@@ -490,8 +668,6 @@ try:
    # Startup the replay cache
    ErrType = EX_TEMPFAIL;
    ErrMsg = "Failed to initialize the replay cache:";
-   RC = ReplayCache(ReplayCacheFile);
-   RC.Clean();
 
    # Get the email 
    ErrType = EX_PERMFAIL;
@@ -526,17 +702,11 @@ try:
    else:
       PlainText = Res[3];   
 
-   # Check the signature against the replay cache
-   ErrMsg = "The replay cache rejected your message. Check your clock!";
-   Rply = RC.Check(Res[1]);
-   if Rply != None:
-      raise Error, Rply;
-
    # Connect to the ldap server
    ErrType = EX_TEMPFAIL;
    ErrMsg = "An error occured while performing the LDAP lookup";
    global l;
-   l = ldap.open(LDAPServer);
+   l = connectLDAP()
    l.simple_bind_s("","");
 
    # Search for the matching key fingerprint
@@ -548,7 +718,17 @@ try:
    if len(Attrs) != 1:
       raise Error, "Oddly your key fingerprint is assigned to more than one account.."
 
+
+   # Check the signature against the replay cache
+   RC = ReplayCache(ReplayCacheFile);
+   RC.Clean();
+   ErrMsg = "The replay cache rejected your message. Check your clock!";
+   Rply = RC.Check(Res[1]);
+   if Rply != None:
+      RC.close()
+      raise Error, Rply;
    RC.Add(Res[1]);
+   RC.close()
 
    # Determine the sender address
    ErrMsg = "A problem occured while trying to formulate the reply";
@@ -606,7 +786,7 @@ except:
    try:
       ErrReply = TemplateSubst(Subst,open(TemplatesDir+"error-reply","r").read());
 
-      Child = os.popen("/usr/sbin/sendmail -t","w");
+      Child = os.popen("/usr/sbin/sendmail -t -oi -f ''","w");
       Child.write(ErrReplyHead);
       Child.write(ErrReply);
       if Child.close() != None:
@@ -617,4 +797,7 @@ except:
    if ErrType != EX_PERMFAIL:
       sys.exit(ErrType);
    sys.exit(0);
-   
+
+# vim:set et:
+# vim:set ts=3:
+# vim:set shiftwidth=3: