--- /dev/null
+#####################################################################
+#
+# Configuration file template for samhain.
+#
+#####################################################################
+#
+# -- empty lines and lines starting with '#', ';' or '//' are ignored
+# -- boolean options can be Yes/No or True/False or 1/0
+# -- you can PGP clearsign this file -- samhain will check (if compiled
+# with support) or otherwise ignore the signature
+# -- CHECK mail address
+#
+# To each log facility, you can assign a threshold severity. Only
+# reports with at least the threshold severity will be logged
+# to the respective facility (even further below).
+#
+#####################################################################
+#
+# SETUP for file system checking:
+#
+# (i) There are several policies, each has its own section. Put files
+# into the section for the appropriate policy (see below).
+# (ii) Section [EventSeverity]:
+# To each policy, you can assign a severity (further below).
+# (iii) Section [Log]:
+# To each log facility, you can assign a threshold severity. Only
+# reports with at least the threshold severity will be logged
+# to the respective facility (even further below).
+#
+#####################################################################
+
+#####################################################################
+#
+# Files are defined with: file = /absolute/path
+#
+# Directories are defined with: dir = /absolute/path
+# or with an optional recursion depth (N <= 99): dir = N/absolute/path
+#
+# Directory inodes are checked. If you only want to check files
+# in a directory, but not the directory inode itself, use (e.g.):
+#
+# [ReadOnly]
+# dir = /some/directory
+# [IgnoreAll]
+# file = /some/directory
+#
+# You can use shell-style globbing patterns, like: file = /path/foo*
+#
+######################################################################
+
+[Misc]
+##
+## Add or subtract tests from the policies
+## - if you want to change their definitions,
+## you need to do that before using the policies
+##
+# RedefReadOnly = (no default)
+# RedefAttributes=(no default)
+# RedefLogFiles=(no default)
+# RedefGrowingLogFiles=(no default)
+# RedefIgnoreAll=(no default)
+# RedefIgnoreNone=(no default)
+# RedefUser0=(no default)
+# RedefUser1=(no default)
+
+[Attributes]
+##
+## for these files, only changes in permissions and ownership are checked
+##
+file=/etc/mtab
+file=/etc/ssh_random_seed
+file=/etc/asound.conf
+file=/etc/resolv.conf
+file=/etc/localtime
+file=/etc/ioctl.save
+file=/etc/passwd.backup
+file=/etc/shadow.backup
+file=/etc/postfix/prng_exch
+file=/etc/adjtime
+file=/etc/lvm/.cache
+file=/etc/network/run/ifstate
+file=/var/state/samhain/samhain_file
+file=/etc/bind/db.debian.net
+file=/etc/exim4/bsmtp
+
+
+#
+# There are files in /etc that might change, thus changing the directory
+# timestamps. Put it here as 'file', and in the ReadOnly section as 'dir'.
+#
+file=/etc
+file=/etc/ssh
+file=/etc/network/run
+file=/etc/bind
+
+# These are the directories for the files we handle with puppet
+file=/etc/samhain
+file=/etc/munin
+file=/etc/exim4
+file=/etc/apt/apt.conf.d
+file=/etc/apt/sources.list.d
+file=/etc/puppet
+
+[LogFiles]
+##
+## for these files, changes in signature, timestamps, and size are ignored
+##
+file=/var/run/utmp
+file=/etc/motd
+
+
+
+#####################################################################
+#
+# This would be the proper syntax for parts that should only be
+# included for certain hosts.
+# You may enclose anything in a @HOSTNAME/@end bracket, as long as the
+# result still has the proper syntax for the config file.
+# You may have any number of @HOSTNAME/@end brackets.
+# HOSTNAME should be the fully qualified 'official' name
+# (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
+# No IP number - except if samhain cannot determine the
+# fully qualified hostname.
+#
+# @HOSTNAME
+# file=/foo/bar
+# @end
+#
+# These are two examples for conditional inclusion/exclusion
+# of a machine based on the output from 'uname -srm'
+#
+# $Linux:2.*.7:i666
+# file=/foo/bar3
+# $end
+#
+# !$Linux:2.*.7:i686
+# file=/foo/bar2
+# $end
+#
+#####################################################################
+
+[GrowingLogFiles]
+##
+## for these files, changes in signature, timestamps, and increase in size
+## are ignored
+##
+file=/var/log/warn
+file=/var/log/messages
+file=/var/log/wtmp
+file=/var/log/faillog
+file=/var/log/auth.log
+file=/var/log/daemon.log
+file=/var/log/user.log
+file=/var/log/kern.log
+file=/var/log/syslog
+
+
+[IgnoreAll]
+##
+## for these files, no modifications are reported
+##
+## This file might be created or removed by the system sometimes.
+##
+file=/etc/resolv.conf.pcmcia.save
+file=/etc/nologin
+file=/etc/postfix/debian.db
+file=/etc/postfix/debian
+file=/etc/ssh/ssh_known_hosts
+file=/etc/ssh/ssh-rsa-shadow
+file=/var/lib/misc/ssh-rsa-shadow
+file=/etc/.da-backup.trace
+file=/etc/postfix/debianhosts
+file=/etc/postfix/debianhosts.db
+
+# We handle these files with puppet - please to not be bothering us
+file=/etc/samhain/samhainrc
+file=/etc/munin/munin-node.conf
+file=/etc/exim4/blacklist
+file=/etc/exim4/callout_users
+file=/etc/exim4/exim4.conf
+file=/etc/exim4/grey_users
+file=/etc/exim4/helo-check
+file=/etc/exim4/locals
+file=/etc/exim4/localusers
+file=/etc/exim4/rbllist
+file=/etc/exim4/rcpthosts
+file=/etc/exim4/rhsbllist
+file=/etc/exim4/virtualdomains
+file=/etc/exim4/whitelist
+file=/etc/apt/sources.list.d/volatile.list
+file=/etc/apt/sources.list.d/security.list
+file=/etc/apt/sources.list.d/debian.org.list
+file=/etc/apt/sources.list.d/debian.list
+file=/etc/apt/sources.list.d/backports.org.list
+file=/etc/apt/apt.conf.d/local-recommends
+file=/etc/puppet/puppet.conf
+
+[IgnoreNone]
+##
+## for these files, all modifications (even access time) are reported
+## - you may create some interesting-looking file (like /etc/safe_passwd),
+## just to watch whether someone will access it ...
+##
+
+[Prelink]
+##
+## Use for prelinked files or directories holding them
+##
+
+
+[ReadOnly]
+##
+## for these files, only access time is ignored
+##
+dir=/usr/bin
+dir=/bin
+dir=/boot
+#
+# SuSE (old) has the boot init scripts in /sbin/init.d/*,
+# so we go 3 levels deep
+#
+dir=3/sbin
+dir=/usr/sbin
+dir=/lib
+dir=3/usr/lib
+#
+# RedHat and Debian have the bootinit scripts in /etc/init.d/* or /etc/rc.d/*,
+# so we go 3 levels deep there too
+#
+dir=3/etc
+
+# Various directories / files that may include / be SUID/SGID binaries
+#
+#
+file=/usr/lib/pt_chown
+# X11, in Debian X7 this is now a symlink
+#dir=/usr/X11R6/bin
+#dir=/usr/X11R6/lib/X11/xmcd/bin
+# Apache:
+#file=/usr/lib/apache/suexec
+#file=/usr/lib/apache/suexec.disabled
+# Extra directories:
+#dir=/opt/gnome/bin
+#dir=/opt/kde/bin
+
+[User0]
+[User1]
+## User0 and User1 are sections for files/dirs with user-definable checking
+## (see the manual)
+
+
+[EventSeverity]
+##
+## Here you can assign severities to policy violations.
+## If this severity exceeds the treshold of a log facility (see below),
+## a policy violation will be logged to that facility.
+##
+## Severity for verification failures.
+##
+# SeverityReadOnly=crit
+# SeverityLogFiles=crit
+# SeverityGrowingLogs=crit
+# SeverityIgnoreNone=crit
+# SeverityAttributes=crit
+# SeverityUser0=crit
+# SeverityUser1=crit
+
+# Default behaviour
+SeverityReadOnly=crit
+SeverityLogFiles=crit
+SeverityGrowingLogs=warn
+SeverityIgnoreNone=crit
+SeverityAttributes=crit
+
+
+##
+## We have a file in IgnoreAll that might or might not be present.
+## Setting the severity to 'info' prevents messages about deleted/new file.
+##
+# SeverityIgnoreAll=crit
+SeverityIgnoreAll=info
+
+## Files : file access problems
+# SeverityFiles=crit
+
+## Dirs : directory access problems
+# SeverityDirs=crit
+
+## Names : suspect (non-printable) characters in a pathname
+# SeverityNames=crit
+
+# Default behaviour
+SeverityFiles=crit
+SeverityDirs=crit
+SeverityNames=warn
+
+
+[Log]
+##
+## Switch on/OFF log facilities and set their threshold severity
+##
+## Values: debug, info, notice, warn, mark, err, crit, alert, none.
+## 'mark' is used for timestamps.
+##
+##
+## Use 'none' to SWITCH OFF a log facility
+##
+## By default, everything equal to and above the threshold is logged.
+## The specifiers '*', '!', and '=' are interpreted as
+## 'all', 'all but', and 'only', respectively (like syslogd(8) does,
+## at least on Linux). Examples:
+## MailSeverity=*
+## MailSeverity=!warn
+## MailSeverity==crit
+
+## E-mail
+##
+# MailSeverity=none
+
+## Console
+##
+# PrintSeverity=info
+
+## Logfile
+##
+# LogSeverity=mark
+
+## Syslog
+##
+# SyslogSeverity=none
+
+## Remote server (yule)
+##
+# ExportSeverity=none
+
+## External script or program
+##
+# ExternalSeverity = none
+
+## Logging to a database
+##
+# DatabaseSeverity = none
+
+# Default behaviour
+MailSeverity=crit
+PrintSeverity=none
+LogSeverity=info
+SyslogSeverity=alert
+ExportSeverity=none
+
+
+
+
+
+#####################################################
+#
+# Optional modules
+#
+#####################################################
+
+# [SuidCheck]
+##
+## --- Check the filesystem for SUID/SGID binaries
+##
+
+## Switch on
+#
+# SuidCheckActive = yes
+
+## Interval for check (seconds)
+#
+# SuidCheckInterval = 7200
+
+## Alternative: crontab-like schedule
+#
+# SuidCheckSchedule = NULL
+
+## Directory to exclude
+#
+# SuidCheckExclude = NULL
+
+## Limit on files per second (0 == no limit)
+#
+# SuidCheckFps = 0
+
+## Alternative: yield after every file
+#
+# SuidCheckYield = no
+
+## Severity of a detection
+#
+# SeveritySuidCheck = crit
+
+## Quarantine SUID/SGID files if found
+#
+# SuidCheckQuarantineFiles = yes
+
+## Method for Quarantining files:
+# 0 - Delete or truncate the file.
+# 1 - Remove SUID/SGID permissions from file.
+# 2 - Move SUID/SGID file to quarantine dir.
+#
+# SuidCheckQuarantineMethod = 0
+
+## For method 1 and 3, really delete instead of truncating
+#
+# SuidCheckQuarantineDelete = yes
+
+# [Kernel]
+##
+## --- Check for loadable kernel module rootkits (Linux/FreeBSD only)
+##
+
+## Switch on/off
+#
+KernelCheckActive = True
+
+## Check interval (seconds); btw., the check is VERY fast
+#
+# KernelCheckInterval = 300
+
+## Severity
+#
+# SeverityKernel = crit
+
+
+# [Utmp]
+##
+## --- Logging of login/logout events
+##
+
+## Switch on/off
+#
+LoginCheckActive = True
+
+## Severity for logins, multiple logins, logouts
+#
+# SeverityLogin=info
+# SeverityLoginMulti=warn
+# SeverityLogout=info
+
+## Interval for login/logout checks
+#
+# LoginCheckInterval = 300
+
+
+# [Database]
+##
+## --- Logging to a relational database
+##
+
+## Database name
+#
+# SetDBName = samhain
+
+## Database table
+#
+# SetDBTable = log
+
+## Database user
+#
+# SetDBUser = samhain
+
+## Database password
+#
+# SetDBPassword = (default: none)
+
+## Database host
+#
+# SetDBHost = localhost
+
+## Log the server timestamp for received messages
+#
+# SetDBServerTstamp = True
+
+## Use a persistent connection
+#
+# UsePersistent = True
+
+# [External]
+##
+## Interface to call external scripts/programs for logging
+##
+
+## The absolute path to the command
+## - Each invocation of this directive will end the definition of the
+## preceding command, and start the definition of
+## an additional, new command
+#
+# OpenCommand = (no default)
+
+## Type (log or rv)
+## - log for log messages, srv for messages received by the server
+#
+# SetType = log
+
+## The command (full command line) to execute
+#
+# SetCommandLine = (no default)
+
+## The environment (KEY=value; repeat for more)
+#
+# SetEnviron = TZ=(your timezone)
+
+## The TIGER192 checksum (optional)
+#
+# SetChecksum = (no default)
+
+## User who runs the command
+#
+# SetCredentials = (default: samhain process uid)
+
+## Words not allowed in message
+#
+# SetFilterNot = (none)
+
+## Words required (ALL of them)
+#
+# SetFilterAnd = (none)
+
+## Words required (at least one)
+#
+# SetFilterOr = (none)
+
+## Deadtime between consecutive calls
+#
+# SetDeadtime = 0
+
+## Add default environment (HOME, PATH, SHELL)
+#
+# SetDefault = no
+
+
+#####################################################
+#
+# Miscellaneous configuration options
+#
+#####################################################
+
+[Misc]
+
+## whether to become a daemon process
+## (this is not honoured on database initialisation)
+#
+# Daemon = no
+Daemon = yes
+
+## whether to test signature of files (init/check/none)
+## - if 'none', then we have to decide this on the command line -
+#
+# ChecksumTest = none
+ChecksumTest=check
+
+## whether to drop linux capabilities that are not required
+## - will make a root process a 'mere mortal' in many respects
+#
+# UseCaps = yes
+
+## Set nice level (-19 to 19, see 'man nice'),
+## and I/O limit (kilobytes per second; 0 == off)
+## to reduce load on host.
+#
+# SetNiceLevel = 0
+# SetIOLimit = 0
+
+## The version string to embed in file signature databases
+#
+# VersionString = NULL
+
+## Interval between time stamp messages
+#
+# SetLoopTime = 60
+SetLoopTime = 600
+
+## Interval between file checks
+#
+# SetFileCheckTime = 600
+SetFileCheckTime = 7200
+
+## Alternative: crontab-like schedule
+#
+# FileCheckScheduleOne = NULL
+
+## Alternative: crontab-like schedule(2)
+#
+# FileCheckScheduleTwo = NULL
+
+## Report only once on modified fles
+## Setting this to 'FALSE' will generate a report for any policy
+## violation (old and new ones) each time the daemon checks the file system.
+#
+# ReportOnlyOnce = True
+
+## Report in full detail
+#
+# ReportFullDetail = False
+
+## Report file timestamps in local time rather than GMT
+#
+# UseLocalTime = No
+
+## The console device (can also be a file or named pipe)
+## - There are two console devices. Accordingly, you can use
+## this directive a second time to set the second console device.
+## If you have not defined the second device at compile time,
+## and you don't want to use it, then:
+## setting it to /dev/null is less effective than just leaving
+## it alone (setting to /dev/null will waste time by opening
+## /dev/null and writing to it)
+#
+# SetConsole = /dev/console
+
+## Activate the SysV IPC message queue
+#
+# MessageQueueActive = False
+
+
+## If false, skip reverse lookup when connecting to a host known
+## by name rather than IP address (i.e. trust the DNS)
+#
+# SetReverseLookup = True
+
+## --- E-Mail ---
+
+# Only highest-level (alert) reports will be mailed immediately,
+# others will be queued. Here you can define, when the queue will
+# be flushed (Note: the queue is automatically flushed after
+# completing a file check).
+#
+SetMailTime = 86400
+
+## Maximum number of mails to queue
+#
+SetMailNum = 10
+
+## Recipient (max. 8)
+#
+SetMailAddress=samhain-reports@debian.org
+
+## Mail relay (IP address)
+#
+SetMailRelay = master.debian.org
+
+## Custom subject format
+#
+MailSubject = [Samhain at %H] %T: %S
+
+## --- end E-Mail ---
+
+## Path to the prelink executable
+#
+# SetPrelinkPath = /usr/sbin/prelink
+
+## TIGER192 checksum of the prelink executable
+#
+# SetPrelinkChecksum = (no default)
+
+
+## Path to the executable. If set, will be checksummed after startup
+## and before exit.
+#
+# SamhainPath = (no default)
+
+
+## The IP address of the log server
+#
+# SetLogServer = (default: compiled-in)
+
+## The IP address of the time server
+#
+# SetTimeServer = (default: compiled-in)
+
+## Trusted Users (comma delimited list of user names)
+#
+# TrustedUser = (no default; this adds to the compiled-in list)
+
+## Path to the file signature database
+#
+# SetDatabasePath = (default: compiled-in)
+
+## Path to the log file
+#
+# SetLogfilePath = (default: compiled-in)
+
+## Path to the PID file
+#
+# SetLockPath = (default: compiled-in)
+
+
+## The digest/checksum/hash algorithm
+#
+# DigestAlgo = TIGER192
+
+
+## Custom format for message header.
+## CAREFUL if you use XML logfile format.
+##
+## %S severity
+## %T timestamp
+## %C class
+##
+## %F source file
+## %L source line
+#
+# MessageHeader="%S %T "
+
+
+## Don't log path to config/database file on startup
+#
+# HideSetup = False
+
+## The syslog facility, if you log to syslog
+#
+# SyslogFacility = LOG_AUTHPRIV
+SyslogFacility=LOG_LOCAL2
+
+## The message authentication method
+## - If you change this, you *must* change it
+## on client *and* server
+#
+# MACType = HMAC-TIGER
+
+
+## everything below is ignored
+[EOF]
+
+#####################################################################
+# This would be the proper syntax for parts that should only be
+# included for certain hosts.
+# You may enclose anything in a @HOSTNAME/@end bracket, as long as the
+# result still has the proper syntax for the config file.
+# You may have any number of @HOSTNAME/@end brackets.
+# HOSTNAME should be the fully qualified 'official' name
+# (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
+# No IP number - except if samhain cannot determine the
+# fully qualified hostname.
+#
+# @HOSTNAME
+# file=/foo/bar
+# @end
+#
+# These are two examples for conditional inclusion/exclusion
+# of a machine based on the output from 'uname -srm'
+# $Linux:2.*.7:i666
+# file=/foo/bar3
+# $end
+#
+# !$Linux:2.*.7:i686
+# file=/foo/bar2
+# $end
+#
+#####################################################################
--- /dev/null
+#####################################################################
+#
+# Configuration file template for samhain.
+#
+#####################################################################
+#
+# -- empty lines and lines starting with '#', ';' or '//' are ignored
+# -- boolean options can be Yes/No or True/False or 1/0
+# -- you can PGP clearsign this file -- samhain will check (if compiled
+# with support) or otherwise ignore the signature
+# -- CHECK mail address
+#
+# To each log facility, you can assign a threshold severity. Only
+# reports with at least the threshold severity will be logged
+# to the respective facility (even further below).
+#
+#####################################################################
+#
+# SETUP for file system checking:
+#
+# (i) There are several policies, each has its own section. Put files
+# into the section for the appropriate policy (see below).
+# (ii) Section [EventSeverity]:
+# To each policy, you can assign a severity (further below).
+# (iii) Section [Log]:
+# To each log facility, you can assign a threshold severity. Only
+# reports with at least the threshold severity will be logged
+# to the respective facility (even further below).
+#
+#####################################################################
+
+#####################################################################
+#
+# Files are defined with: file = /absolute/path
+#
+# Directories are defined with: dir = /absolute/path
+# or with an optional recursion depth (N <= 99): dir = N/absolute/path
+#
+# Directory inodes are checked. If you only want to check files
+# in a directory, but not the directory inode itself, use (e.g.):
+#
+# [ReadOnly]
+# dir = /some/directory
+# [IgnoreAll]
+# file = /some/directory
+#
+# You can use shell-style globbing patterns, like: file = /path/foo*
+#
+######################################################################
+
+[Misc]
+##
+## Add or subtract tests from the policies
+## - if you want to change their definitions,
+## you need to do that before using the policies
+##
+# RedefReadOnly = (no default)
+# RedefAttributes=(no default)
+# RedefLogFiles=(no default)
+# RedefGrowingLogFiles=(no default)
+# RedefIgnoreAll=(no default)
+# RedefIgnoreNone=(no default)
+# RedefUser0=(no default)
+# RedefUser1=(no default)
+
+[Attributes]
+##
+## for these files, only changes in permissions and ownership are checked
+##
+file=/etc/mtab
+file=/etc/ssh_random_seed
+file=/etc/asound.conf
+file=/etc/resolv.conf
+file=/etc/localtime
+file=/etc/ioctl.save
+file=/etc/passwd.backup
+file=/etc/shadow.backup
+file=/etc/postfix/prng_exch
+file=/etc/adjtime
+file=/etc/lvm/.cache
+file=/etc/network/run/ifstate
+file=/var/state/samhain/samhain_file
+file=/etc/bind/db.debian.net
+file=/etc/exim4/bsmtp
+
+
+#
+# There are files in /etc that might change, thus changing the directory
+# timestamps. Put it here as 'file', and in the ReadOnly section as 'dir'.
+#
+file=/etc
+file=/etc/ssh
+file=/etc/network/run
+file=/etc/bind
+
+# These are the directories for the files we handle with puppet
+file=/etc/samhain
+file=/etc/munin
+file=/etc/exim4
+file=/etc/apt/apt.conf.d
+file=/etc/apt/sources.list.d
+file=/etc/puppet
+
+[LogFiles]
+##
+## for these files, changes in signature, timestamps, and size are ignored
+##
+file=/var/run/utmp
+file=/etc/motd
+
+
+
+#####################################################################
+#
+# This would be the proper syntax for parts that should only be
+# included for certain hosts.
+# You may enclose anything in a @HOSTNAME/@end bracket, as long as the
+# result still has the proper syntax for the config file.
+# You may have any number of @HOSTNAME/@end brackets.
+# HOSTNAME should be the fully qualified 'official' name
+# (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
+# No IP number - except if samhain cannot determine the
+# fully qualified hostname.
+#
+# @HOSTNAME
+# file=/foo/bar
+# @end
+#
+# These are two examples for conditional inclusion/exclusion
+# of a machine based on the output from 'uname -srm'
+#
+# $Linux:2.*.7:i666
+# file=/foo/bar3
+# $end
+#
+# !$Linux:2.*.7:i686
+# file=/foo/bar2
+# $end
+#
+#####################################################################
+
+[GrowingLogFiles]
+##
+## for these files, changes in signature, timestamps, and increase in size
+## are ignored
+##
+file=/var/log/warn
+file=/var/log/messages
+file=/var/log/wtmp
+file=/var/log/faillog
+file=/var/log/auth.log
+file=/var/log/daemon.log
+file=/var/log/user.log
+file=/var/log/kern.log
+file=/var/log/syslog
+
+
+[IgnoreAll]
+##
+## for these files, no modifications are reported
+##
+## This file might be created or removed by the system sometimes.
+##
+file=/etc/resolv.conf.pcmcia.save
+file=/etc/nologin
+file=/etc/postfix/debian.db
+file=/etc/postfix/debian
+file=/etc/ssh/ssh_known_hosts
+file=/etc/ssh/ssh-rsa-shadow
+file=/var/lib/misc/ssh-rsa-shadow
+file=/etc/.da-backup.trace
+file=/etc/postfix/debianhosts
+file=/etc/postfix/debianhosts.db
+
+# We handle these files with puppet - please to not be bothering us
+file=/etc/samhain/samhainrc
+file=/etc/munin/munin-node.conf
+file=/etc/exim4/blacklist
+file=/etc/exim4/callout_users
+file=/etc/exim4/exim4.conf
+file=/etc/exim4/grey_users
+file=/etc/exim4/helo-check
+file=/etc/exim4/locals
+file=/etc/exim4/localusers
+file=/etc/exim4/rbllist
+file=/etc/exim4/rcpthosts
+file=/etc/exim4/rhsbllist
+file=/etc/exim4/virtualdomains
+file=/etc/exim4/whitelist
+file=/etc/apt/sources.list.d/volatile.list
+file=/etc/apt/sources.list.d/security.list
+file=/etc/apt/sources.list.d/debian.org.list
+file=/etc/apt/sources.list.d/debian.list
+file=/etc/apt/sources.list.d/backports.org.list
+file=/etc/apt/apt.conf.d/local-recommends
+file=/etc/puppet
+
+[IgnoreNone]
+##
+## for these files, all modifications (even access time) are reported
+## - you may create some interesting-looking file (like /etc/safe_passwd),
+## just to watch whether someone will access it ...
+##
+
+[Prelink]
+##
+## Use for prelinked files or directories holding them
+##
+
+
+[ReadOnly]
+##
+## for these files, only access time is ignored
+##
+dir=/usr/bin
+dir=/bin
+dir=/boot
+#
+# SuSE (old) has the boot init scripts in /sbin/init.d/*,
+# so we go 3 levels deep
+#
+dir=3/sbin
+dir=/usr/sbin
+dir=/lib
+dir=3/usr/lib
+#
+# RedHat and Debian have the bootinit scripts in /etc/init.d/* or /etc/rc.d/*,
+# so we go 3 levels deep there too
+#
+dir=3/etc
+
+# Various directories / files that may include / be SUID/SGID binaries
+#
+#
+file=/usr/lib/pt_chown
+# X11, in Debian X7 this is now a symlink
+#dir=/usr/X11R6/bin
+#dir=/usr/X11R6/lib/X11/xmcd/bin
+# Apache:
+#file=/usr/lib/apache/suexec
+#file=/usr/lib/apache/suexec.disabled
+# Extra directories:
+#dir=/opt/gnome/bin
+#dir=/opt/kde/bin
+
+[User0]
+[User1]
+## User0 and User1 are sections for files/dirs with user-definable checking
+## (see the manual)
+
+
+[EventSeverity]
+##
+## Here you can assign severities to policy violations.
+## If this severity exceeds the treshold of a log facility (see below),
+## a policy violation will be logged to that facility.
+##
+## Severity for verification failures.
+##
+# SeverityReadOnly=crit
+# SeverityLogFiles=crit
+# SeverityGrowingLogs=crit
+# SeverityIgnoreNone=crit
+# SeverityAttributes=crit
+# SeverityUser0=crit
+# SeverityUser1=crit
+
+# Default behaviour
+SeverityReadOnly=crit
+SeverityLogFiles=crit
+SeverityGrowingLogs=warn
+SeverityIgnoreNone=crit
+SeverityAttributes=crit
+
+
+##
+## We have a file in IgnoreAll that might or might not be present.
+## Setting the severity to 'info' prevents messages about deleted/new file.
+##
+# SeverityIgnoreAll=crit
+SeverityIgnoreAll=info
+
+## Files : file access problems
+# SeverityFiles=crit
+
+## Dirs : directory access problems
+# SeverityDirs=crit
+
+## Names : suspect (non-printable) characters in a pathname
+# SeverityNames=crit
+
+# Default behaviour
+SeverityFiles=crit
+SeverityDirs=crit
+SeverityNames=warn
+
+
+[Log]
+##
+## Switch on/OFF log facilities and set their threshold severity
+##
+## Values: debug, info, notice, warn, mark, err, crit, alert, none.
+## 'mark' is used for timestamps.
+##
+##
+## Use 'none' to SWITCH OFF a log facility
+##
+## By default, everything equal to and above the threshold is logged.
+## The specifiers '*', '!', and '=' are interpreted as
+## 'all', 'all but', and 'only', respectively (like syslogd(8) does,
+## at least on Linux). Examples:
+## MailSeverity=*
+## MailSeverity=!warn
+## MailSeverity==crit
+
+## E-mail
+##
+# MailSeverity=none
+
+## Console
+##
+# PrintSeverity=info
+
+## Logfile
+##
+# LogSeverity=mark
+
+## Syslog
+##
+# SyslogSeverity=none
+
+## Remote server (yule)
+##
+# ExportSeverity=none
+
+## External script or program
+##
+# ExternalSeverity = none
+
+## Logging to a database
+##
+# DatabaseSeverity = none
+
+# Default behaviour
+MailSeverity=crit
+PrintSeverity=none
+LogSeverity=info
+SyslogSeverity=alert
+ExportSeverity=none
+
+
+
+
+
+#####################################################
+#
+# Optional modules
+#
+#####################################################
+
+# [SuidCheck]
+##
+## --- Check the filesystem for SUID/SGID binaries
+##
+
+## Switch on
+#
+# SuidCheckActive = yes
+
+## Interval for check (seconds)
+#
+# SuidCheckInterval = 7200
+
+## Alternative: crontab-like schedule
+#
+# SuidCheckSchedule = NULL
+
+## Directory to exclude
+#
+# SuidCheckExclude = NULL
+
+## Limit on files per second (0 == no limit)
+#
+# SuidCheckFps = 0
+
+## Alternative: yield after every file
+#
+# SuidCheckYield = no
+
+## Severity of a detection
+#
+# SeveritySuidCheck = crit
+
+## Quarantine SUID/SGID files if found
+#
+# SuidCheckQuarantineFiles = yes
+
+## Method for Quarantining files:
+# 0 - Delete or truncate the file.
+# 1 - Remove SUID/SGID permissions from file.
+# 2 - Move SUID/SGID file to quarantine dir.
+#
+# SuidCheckQuarantineMethod = 0
+
+## For method 1 and 3, really delete instead of truncating
+#
+# SuidCheckQuarantineDelete = yes
+
+# [Kernel]
+##
+## --- Check for loadable kernel module rootkits (Linux/FreeBSD only)
+##
+
+## Switch on/off
+#
+KernelCheckActive = True
+
+## Check interval (seconds); btw., the check is VERY fast
+#
+# KernelCheckInterval = 300
+
+## Severity
+#
+# SeverityKernel = crit
+
+
+# [Utmp]
+##
+## --- Logging of login/logout events
+##
+
+## Switch on/off
+#
+LoginCheckActive = True
+
+## Severity for logins, multiple logins, logouts
+#
+# SeverityLogin=info
+# SeverityLoginMulti=warn
+# SeverityLogout=info
+
+## Interval for login/logout checks
+#
+# LoginCheckInterval = 300
+
+
+# [Database]
+##
+## --- Logging to a relational database
+##
+
+## Database name
+#
+# SetDBName = samhain
+
+## Database table
+#
+# SetDBTable = log
+
+## Database user
+#
+# SetDBUser = samhain
+
+## Database password
+#
+# SetDBPassword = (default: none)
+
+## Database host
+#
+# SetDBHost = localhost
+
+## Log the server timestamp for received messages
+#
+# SetDBServerTstamp = True
+
+## Use a persistent connection
+#
+# UsePersistent = True
+
+# [External]
+##
+## Interface to call external scripts/programs for logging
+##
+
+## The absolute path to the command
+## - Each invocation of this directive will end the definition of the
+## preceding command, and start the definition of
+## an additional, new command
+#
+# OpenCommand = (no default)
+
+## Type (log or rv)
+## - log for log messages, srv for messages received by the server
+#
+# SetType = log
+
+## The command (full command line) to execute
+#
+# SetCommandLine = (no default)
+
+## The environment (KEY=value; repeat for more)
+#
+# SetEnviron = TZ=(your timezone)
+
+## The TIGER192 checksum (optional)
+#
+# SetChecksum = (no default)
+
+## User who runs the command
+#
+# SetCredentials = (default: samhain process uid)
+
+## Words not allowed in message
+#
+# SetFilterNot = (none)
+
+## Words required (ALL of them)
+#
+# SetFilterAnd = (none)
+
+## Words required (at least one)
+#
+# SetFilterOr = (none)
+
+## Deadtime between consecutive calls
+#
+# SetDeadtime = 0
+
+## Add default environment (HOME, PATH, SHELL)
+#
+# SetDefault = no
+
+
+#####################################################
+#
+# Miscellaneous configuration options
+#
+#####################################################
+
+[Misc]
+
+## whether to become a daemon process
+## (this is not honoured on database initialisation)
+#
+# Daemon = no
+Daemon = yes
+
+## whether to test signature of files (init/check/none)
+## - if 'none', then we have to decide this on the command line -
+#
+# ChecksumTest = none
+ChecksumTest=check
+
+## whether to drop linux capabilities that are not required
+## - will make a root process a 'mere mortal' in many respects
+#
+# UseCaps = yes
+
+## Set nice level (-19 to 19, see 'man nice'),
+## and I/O limit (kilobytes per second; 0 == off)
+## to reduce load on host.
+#
+# SetNiceLevel = 0
+# SetIOLimit = 0
+
+## The version string to embed in file signature databases
+#
+# VersionString = NULL
+
+## Interval between time stamp messages
+#
+# SetLoopTime = 60
+SetLoopTime = 600
+
+## Interval between file checks
+#
+# SetFileCheckTime = 600
+SetFileCheckTime = 7200
+
+## Alternative: crontab-like schedule
+#
+# FileCheckScheduleOne = NULL
+
+## Alternative: crontab-like schedule(2)
+#
+# FileCheckScheduleTwo = NULL
+
+## Report only once on modified fles
+## Setting this to 'FALSE' will generate a report for any policy
+## violation (old and new ones) each time the daemon checks the file system.
+#
+# ReportOnlyOnce = True
+
+## Report in full detail
+#
+# ReportFullDetail = False
+
+## Report file timestamps in local time rather than GMT
+#
+# UseLocalTime = No
+
+## The console device (can also be a file or named pipe)
+## - There are two console devices. Accordingly, you can use
+## this directive a second time to set the second console device.
+## If you have not defined the second device at compile time,
+## and you don't want to use it, then:
+## setting it to /dev/null is less effective than just leaving
+## it alone (setting to /dev/null will waste time by opening
+## /dev/null and writing to it)
+#
+# SetConsole = /dev/console
+
+## Activate the SysV IPC message queue
+#
+# MessageQueueActive = False
+
+
+## If false, skip reverse lookup when connecting to a host known
+## by name rather than IP address (i.e. trust the DNS)
+#
+# SetReverseLookup = True
+
+## --- E-Mail ---
+
+# Only highest-level (alert) reports will be mailed immediately,
+# others will be queued. Here you can define, when the queue will
+# be flushed (Note: the queue is automatically flushed after
+# completing a file check).
+#
+SetMailTime = 86400
+
+## Maximum number of mails to queue
+#
+SetMailNum = 10
+
+## Recipient (max. 8)
+#
+SetMailAddress=samhain-reports@debian.org
+
+## Mail relay (IP address)
+#
+SetMailRelay = master.debian.org
+
+## Custom subject format
+#
+MailSubject = [Samhain at %H] %T: %S
+
+## --- end E-Mail ---
+
+## Path to the prelink executable
+#
+# SetPrelinkPath = /usr/sbin/prelink
+
+## TIGER192 checksum of the prelink executable
+#
+# SetPrelinkChecksum = (no default)
+
+
+## Path to the executable. If set, will be checksummed after startup
+## and before exit.
+#
+# SamhainPath = (no default)
+
+
+## The IP address of the log server
+#
+# SetLogServer = (default: compiled-in)
+
+## The IP address of the time server
+#
+# SetTimeServer = (default: compiled-in)
+
+## Trusted Users (comma delimited list of user names)
+#
+# TrustedUser = (no default; this adds to the compiled-in list)
+
+## Path to the file signature database
+#
+# SetDatabasePath = (default: compiled-in)
+
+## Path to the log file
+#
+# SetLogfilePath = (default: compiled-in)
+
+## Path to the PID file
+#
+# SetLockPath = (default: compiled-in)
+
+
+## The digest/checksum/hash algorithm
+#
+# DigestAlgo = TIGER192
+
+
+## Custom format for message header.
+## CAREFUL if you use XML logfile format.
+##
+## %S severity
+## %T timestamp
+## %C class
+##
+## %F source file
+## %L source line
+#
+# MessageHeader="%S %T "
+
+
+## Don't log path to config/database file on startup
+#
+# HideSetup = False
+
+## The syslog facility, if you log to syslog
+#
+# SyslogFacility = LOG_AUTHPRIV
+SyslogFacility=LOG_LOCAL2
+
+## The message authentication method
+## - If you change this, you *must* change it
+## on client *and* server
+#
+# MACType = HMAC-TIGER
+
+
+## everything below is ignored
+[EOF]
+
+#####################################################################
+# This would be the proper syntax for parts that should only be
+# included for certain hosts.
+# You may enclose anything in a @HOSTNAME/@end bracket, as long as the
+# result still has the proper syntax for the config file.
+# You may have any number of @HOSTNAME/@end brackets.
+# HOSTNAME should be the fully qualified 'official' name
+# (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
+# No IP number - except if samhain cannot determine the
+# fully qualified hostname.
+#
+# @HOSTNAME
+# file=/foo/bar
+# @end
+#
+# These are two examples for conditional inclusion/exclusion
+# of a machine based on the output from 'uname -srm'
+# $Linux:2.*.7:i666
+# file=/foo/bar3
+# $end
+#
+# !$Linux:2.*.7:i686
+# file=/foo/bar2
+# $end
+#
+#####################################################################
+++ /dev/null
-#####################################################################
-#
-# Configuration file template for samhain.
-#
-#####################################################################
-#
-# -- empty lines and lines starting with '#', ';' or '//' are ignored
-# -- boolean options can be Yes/No or True/False or 1/0
-# -- you can PGP clearsign this file -- samhain will check (if compiled
-# with support) or otherwise ignore the signature
-# -- CHECK mail address
-#
-# To each log facility, you can assign a threshold severity. Only
-# reports with at least the threshold severity will be logged
-# to the respective facility (even further below).
-#
-#####################################################################
-#
-# SETUP for file system checking:
-#
-# (i) There are several policies, each has its own section. Put files
-# into the section for the appropriate policy (see below).
-# (ii) Section [EventSeverity]:
-# To each policy, you can assign a severity (further below).
-# (iii) Section [Log]:
-# To each log facility, you can assign a threshold severity. Only
-# reports with at least the threshold severity will be logged
-# to the respective facility (even further below).
-#
-#####################################################################
-
-#####################################################################
-#
-# Files are defined with: file = /absolute/path
-#
-# Directories are defined with: dir = /absolute/path
-# or with an optional recursion depth (N <= 99): dir = N/absolute/path
-#
-# Directory inodes are checked. If you only want to check files
-# in a directory, but not the directory inode itself, use (e.g.):
-#
-# [ReadOnly]
-# dir = /some/directory
-# [IgnoreAll]
-# file = /some/directory
-#
-# You can use shell-style globbing patterns, like: file = /path/foo*
-#
-######################################################################
-
-[Misc]
-##
-## Add or subtract tests from the policies
-## - if you want to change their definitions,
-## you need to do that before using the policies
-##
-# RedefReadOnly = (no default)
-# RedefAttributes=(no default)
-# RedefLogFiles=(no default)
-# RedefGrowingLogFiles=(no default)
-# RedefIgnoreAll=(no default)
-# RedefIgnoreNone=(no default)
-# RedefUser0=(no default)
-# RedefUser1=(no default)
-
-[Attributes]
-##
-## for these files, only changes in permissions and ownership are checked
-##
-file=/etc/mtab
-file=/etc/ssh_random_seed
-file=/etc/asound.conf
-file=/etc/resolv.conf
-file=/etc/localtime
-file=/etc/ioctl.save
-file=/etc/passwd.backup
-file=/etc/shadow.backup
-file=/etc/postfix/prng_exch
-file=/etc/adjtime
-file=/etc/lvm/.cache
-file=/etc/network/run/ifstate
-file=/var/state/samhain/samhain_file
-file=/etc/bind/db.debian.net
-file=/etc/exim4/bsmtp
-
-
-#
-# There are files in /etc that might change, thus changing the directory
-# timestamps. Put it here as 'file', and in the ReadOnly section as 'dir'.
-#
-file=/etc
-file=/etc/ssh
-file=/etc/network/run
-file=/etc/bind
-
-# These are the directories for the files we handle with puppet
-file=/etc/samhain
-file=/etc/munin
-file=/etc/exim4
-file=/etc/apt/apt.conf.d
-file=/etc/apt/sources.list.d
-file=/etc/puppet
-
-[LogFiles]
-##
-## for these files, changes in signature, timestamps, and size are ignored
-##
-file=/var/run/utmp
-file=/etc/motd
-
-
-
-#####################################################################
-#
-# This would be the proper syntax for parts that should only be
-# included for certain hosts.
-# You may enclose anything in a @HOSTNAME/@end bracket, as long as the
-# result still has the proper syntax for the config file.
-# You may have any number of @HOSTNAME/@end brackets.
-# HOSTNAME should be the fully qualified 'official' name
-# (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
-# No IP number - except if samhain cannot determine the
-# fully qualified hostname.
-#
-# @HOSTNAME
-# file=/foo/bar
-# @end
-#
-# These are two examples for conditional inclusion/exclusion
-# of a machine based on the output from 'uname -srm'
-#
-# $Linux:2.*.7:i666
-# file=/foo/bar3
-# $end
-#
-# !$Linux:2.*.7:i686
-# file=/foo/bar2
-# $end
-#
-#####################################################################
-
-[GrowingLogFiles]
-##
-## for these files, changes in signature, timestamps, and increase in size
-## are ignored
-##
-file=/var/log/warn
-file=/var/log/messages
-file=/var/log/wtmp
-file=/var/log/faillog
-file=/var/log/auth.log
-file=/var/log/daemon.log
-file=/var/log/user.log
-file=/var/log/kern.log
-file=/var/log/syslog
-
-
-[IgnoreAll]
-##
-## for these files, no modifications are reported
-##
-## This file might be created or removed by the system sometimes.
-##
-file=/etc/resolv.conf.pcmcia.save
-file=/etc/nologin
-file=/etc/postfix/debian.db
-file=/etc/postfix/debian
-file=/etc/ssh/ssh_known_hosts
-file=/etc/ssh/ssh-rsa-shadow
-file=/var/lib/misc/ssh-rsa-shadow
-file=/etc/.da-backup.trace
-file=/etc/postfix/debianhosts
-file=/etc/postfix/debianhosts.db
-
-# We handle these files with puppet - please to not be bothering us
-file=/etc/samhain/samhainrc
-file=/etc/munin/munin-node.conf
-file=/etc/exim4/blacklist
-file=/etc/exim4/callout_users
-file=/etc/exim4/exim4.conf
-file=/etc/exim4/grey_users
-file=/etc/exim4/helo-check
-file=/etc/exim4/locals
-file=/etc/exim4/localusers
-file=/etc/exim4/rbllist
-file=/etc/exim4/rcpthosts
-file=/etc/exim4/rhsbllist
-file=/etc/exim4/virtualdomains
-file=/etc/exim4/whitelist
-file=/etc/apt/sources.list.d/volatile.list
-file=/etc/apt/sources.list.d/security.list
-file=/etc/apt/sources.list.d/debian.org.list
-file=/etc/apt/sources.list.d/debian.list
-file=/etc/apt/sources.list.d/backports.org.list
-file=/etc/apt/apt.conf.d/local-recommends
-file=/etc/puppet/puppet.conf
-
-[IgnoreNone]
-##
-## for these files, all modifications (even access time) are reported
-## - you may create some interesting-looking file (like /etc/safe_passwd),
-## just to watch whether someone will access it ...
-##
-
-[Prelink]
-##
-## Use for prelinked files or directories holding them
-##
-
-
-[ReadOnly]
-##
-## for these files, only access time is ignored
-##
-dir=/usr/bin
-dir=/bin
-dir=/boot
-#
-# SuSE (old) has the boot init scripts in /sbin/init.d/*,
-# so we go 3 levels deep
-#
-dir=3/sbin
-dir=/usr/sbin
-dir=/lib
-dir=3/usr/lib
-#
-# RedHat and Debian have the bootinit scripts in /etc/init.d/* or /etc/rc.d/*,
-# so we go 3 levels deep there too
-#
-dir=3/etc
-
-# Various directories / files that may include / be SUID/SGID binaries
-#
-#
-file=/usr/lib/pt_chown
-# X11, in Debian X7 this is now a symlink
-#dir=/usr/X11R6/bin
-#dir=/usr/X11R6/lib/X11/xmcd/bin
-# Apache:
-#file=/usr/lib/apache/suexec
-#file=/usr/lib/apache/suexec.disabled
-# Extra directories:
-#dir=/opt/gnome/bin
-#dir=/opt/kde/bin
-
-[User0]
-[User1]
-## User0 and User1 are sections for files/dirs with user-definable checking
-## (see the manual)
-
-
-[EventSeverity]
-##
-## Here you can assign severities to policy violations.
-## If this severity exceeds the treshold of a log facility (see below),
-## a policy violation will be logged to that facility.
-##
-## Severity for verification failures.
-##
-# SeverityReadOnly=crit
-# SeverityLogFiles=crit
-# SeverityGrowingLogs=crit
-# SeverityIgnoreNone=crit
-# SeverityAttributes=crit
-# SeverityUser0=crit
-# SeverityUser1=crit
-
-# Default behaviour
-SeverityReadOnly=crit
-SeverityLogFiles=crit
-SeverityGrowingLogs=warn
-SeverityIgnoreNone=crit
-SeverityAttributes=crit
-
-
-##
-## We have a file in IgnoreAll that might or might not be present.
-## Setting the severity to 'info' prevents messages about deleted/new file.
-##
-# SeverityIgnoreAll=crit
-SeverityIgnoreAll=info
-
-## Files : file access problems
-# SeverityFiles=crit
-
-## Dirs : directory access problems
-# SeverityDirs=crit
-
-## Names : suspect (non-printable) characters in a pathname
-# SeverityNames=crit
-
-# Default behaviour
-SeverityFiles=crit
-SeverityDirs=crit
-SeverityNames=warn
-
-
-[Log]
-##
-## Switch on/OFF log facilities and set their threshold severity
-##
-## Values: debug, info, notice, warn, mark, err, crit, alert, none.
-## 'mark' is used for timestamps.
-##
-##
-## Use 'none' to SWITCH OFF a log facility
-##
-## By default, everything equal to and above the threshold is logged.
-## The specifiers '*', '!', and '=' are interpreted as
-## 'all', 'all but', and 'only', respectively (like syslogd(8) does,
-## at least on Linux). Examples:
-## MailSeverity=*
-## MailSeverity=!warn
-## MailSeverity==crit
-
-## E-mail
-##
-# MailSeverity=none
-
-## Console
-##
-# PrintSeverity=info
-
-## Logfile
-##
-# LogSeverity=mark
-
-## Syslog
-##
-# SyslogSeverity=none
-
-## Remote server (yule)
-##
-# ExportSeverity=none
-
-## External script or program
-##
-# ExternalSeverity = none
-
-## Logging to a database
-##
-# DatabaseSeverity = none
-
-# Default behaviour
-MailSeverity=crit
-PrintSeverity=none
-LogSeverity=info
-SyslogSeverity=alert
-ExportSeverity=none
-
-
-
-
-
-#####################################################
-#
-# Optional modules
-#
-#####################################################
-
-# [SuidCheck]
-##
-## --- Check the filesystem for SUID/SGID binaries
-##
-
-## Switch on
-#
-# SuidCheckActive = yes
-
-## Interval for check (seconds)
-#
-# SuidCheckInterval = 7200
-
-## Alternative: crontab-like schedule
-#
-# SuidCheckSchedule = NULL
-
-## Directory to exclude
-#
-# SuidCheckExclude = NULL
-
-## Limit on files per second (0 == no limit)
-#
-# SuidCheckFps = 0
-
-## Alternative: yield after every file
-#
-# SuidCheckYield = no
-
-## Severity of a detection
-#
-# SeveritySuidCheck = crit
-
-## Quarantine SUID/SGID files if found
-#
-# SuidCheckQuarantineFiles = yes
-
-## Method for Quarantining files:
-# 0 - Delete or truncate the file.
-# 1 - Remove SUID/SGID permissions from file.
-# 2 - Move SUID/SGID file to quarantine dir.
-#
-# SuidCheckQuarantineMethod = 0
-
-## For method 1 and 3, really delete instead of truncating
-#
-# SuidCheckQuarantineDelete = yes
-
-# [Kernel]
-##
-## --- Check for loadable kernel module rootkits (Linux/FreeBSD only)
-##
-
-## Switch on/off
-#
-KernelCheckActive = True
-
-## Check interval (seconds); btw., the check is VERY fast
-#
-# KernelCheckInterval = 300
-
-## Severity
-#
-# SeverityKernel = crit
-
-
-# [Utmp]
-##
-## --- Logging of login/logout events
-##
-
-## Switch on/off
-#
-LoginCheckActive = True
-
-## Severity for logins, multiple logins, logouts
-#
-# SeverityLogin=info
-# SeverityLoginMulti=warn
-# SeverityLogout=info
-
-## Interval for login/logout checks
-#
-# LoginCheckInterval = 300
-
-
-# [Database]
-##
-## --- Logging to a relational database
-##
-
-## Database name
-#
-# SetDBName = samhain
-
-## Database table
-#
-# SetDBTable = log
-
-## Database user
-#
-# SetDBUser = samhain
-
-## Database password
-#
-# SetDBPassword = (default: none)
-
-## Database host
-#
-# SetDBHost = localhost
-
-## Log the server timestamp for received messages
-#
-# SetDBServerTstamp = True
-
-## Use a persistent connection
-#
-# UsePersistent = True
-
-# [External]
-##
-## Interface to call external scripts/programs for logging
-##
-
-## The absolute path to the command
-## - Each invocation of this directive will end the definition of the
-## preceding command, and start the definition of
-## an additional, new command
-#
-# OpenCommand = (no default)
-
-## Type (log or rv)
-## - log for log messages, srv for messages received by the server
-#
-# SetType = log
-
-## The command (full command line) to execute
-#
-# SetCommandLine = (no default)
-
-## The environment (KEY=value; repeat for more)
-#
-# SetEnviron = TZ=(your timezone)
-
-## The TIGER192 checksum (optional)
-#
-# SetChecksum = (no default)
-
-## User who runs the command
-#
-# SetCredentials = (default: samhain process uid)
-
-## Words not allowed in message
-#
-# SetFilterNot = (none)
-
-## Words required (ALL of them)
-#
-# SetFilterAnd = (none)
-
-## Words required (at least one)
-#
-# SetFilterOr = (none)
-
-## Deadtime between consecutive calls
-#
-# SetDeadtime = 0
-
-## Add default environment (HOME, PATH, SHELL)
-#
-# SetDefault = no
-
-
-#####################################################
-#
-# Miscellaneous configuration options
-#
-#####################################################
-
-[Misc]
-
-## whether to become a daemon process
-## (this is not honoured on database initialisation)
-#
-# Daemon = no
-Daemon = yes
-
-## whether to test signature of files (init/check/none)
-## - if 'none', then we have to decide this on the command line -
-#
-# ChecksumTest = none
-ChecksumTest=check
-
-## whether to drop linux capabilities that are not required
-## - will make a root process a 'mere mortal' in many respects
-#
-# UseCaps = yes
-
-## Set nice level (-19 to 19, see 'man nice'),
-## and I/O limit (kilobytes per second; 0 == off)
-## to reduce load on host.
-#
-# SetNiceLevel = 0
-# SetIOLimit = 0
-
-## The version string to embed in file signature databases
-#
-# VersionString = NULL
-
-## Interval between time stamp messages
-#
-# SetLoopTime = 60
-SetLoopTime = 600
-
-## Interval between file checks
-#
-# SetFileCheckTime = 600
-SetFileCheckTime = 7200
-
-## Alternative: crontab-like schedule
-#
-# FileCheckScheduleOne = NULL
-
-## Alternative: crontab-like schedule(2)
-#
-# FileCheckScheduleTwo = NULL
-
-## Report only once on modified fles
-## Setting this to 'FALSE' will generate a report for any policy
-## violation (old and new ones) each time the daemon checks the file system.
-#
-# ReportOnlyOnce = True
-
-## Report in full detail
-#
-# ReportFullDetail = False
-
-## Report file timestamps in local time rather than GMT
-#
-# UseLocalTime = No
-
-## The console device (can also be a file or named pipe)
-## - There are two console devices. Accordingly, you can use
-## this directive a second time to set the second console device.
-## If you have not defined the second device at compile time,
-## and you don't want to use it, then:
-## setting it to /dev/null is less effective than just leaving
-## it alone (setting to /dev/null will waste time by opening
-## /dev/null and writing to it)
-#
-# SetConsole = /dev/console
-
-## Activate the SysV IPC message queue
-#
-# MessageQueueActive = False
-
-
-## If false, skip reverse lookup when connecting to a host known
-## by name rather than IP address (i.e. trust the DNS)
-#
-# SetReverseLookup = True
-
-## --- E-Mail ---
-
-# Only highest-level (alert) reports will be mailed immediately,
-# others will be queued. Here you can define, when the queue will
-# be flushed (Note: the queue is automatically flushed after
-# completing a file check).
-#
-SetMailTime = 86400
-
-## Maximum number of mails to queue
-#
-SetMailNum = 10
-
-## Recipient (max. 8)
-#
-SetMailAddress=samhain-reports@debian.org
-
-## Mail relay (IP address)
-#
-SetMailRelay = master.debian.org
-
-## Custom subject format
-#
-MailSubject = [Samhain at %H] %T: %S
-
-## --- end E-Mail ---
-
-## Path to the prelink executable
-#
-# SetPrelinkPath = /usr/sbin/prelink
-
-## TIGER192 checksum of the prelink executable
-#
-# SetPrelinkChecksum = (no default)
-
-
-## Path to the executable. If set, will be checksummed after startup
-## and before exit.
-#
-# SamhainPath = (no default)
-
-
-## The IP address of the log server
-#
-# SetLogServer = (default: compiled-in)
-
-## The IP address of the time server
-#
-# SetTimeServer = (default: compiled-in)
-
-## Trusted Users (comma delimited list of user names)
-#
-# TrustedUser = (no default; this adds to the compiled-in list)
-
-## Path to the file signature database
-#
-# SetDatabasePath = (default: compiled-in)
-
-## Path to the log file
-#
-# SetLogfilePath = (default: compiled-in)
-
-## Path to the PID file
-#
-# SetLockPath = (default: compiled-in)
-
-
-## The digest/checksum/hash algorithm
-#
-# DigestAlgo = TIGER192
-
-
-## Custom format for message header.
-## CAREFUL if you use XML logfile format.
-##
-## %S severity
-## %T timestamp
-## %C class
-##
-## %F source file
-## %L source line
-#
-# MessageHeader="%S %T "
-
-
-## Don't log path to config/database file on startup
-#
-# HideSetup = False
-
-## The syslog facility, if you log to syslog
-#
-# SyslogFacility = LOG_AUTHPRIV
-SyslogFacility=LOG_LOCAL2
-
-## The message authentication method
-## - If you change this, you *must* change it
-## on client *and* server
-#
-# MACType = HMAC-TIGER
-
-
-## everything below is ignored
-[EOF]
-
-#####################################################################
-# This would be the proper syntax for parts that should only be
-# included for certain hosts.
-# You may enclose anything in a @HOSTNAME/@end bracket, as long as the
-# result still has the proper syntax for the config file.
-# You may have any number of @HOSTNAME/@end brackets.
-# HOSTNAME should be the fully qualified 'official' name
-# (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
-# No IP number - except if samhain cannot determine the
-# fully qualified hostname.
-#
-# @HOSTNAME
-# file=/foo/bar
-# @end
-#
-# These are two examples for conditional inclusion/exclusion
-# of a machine based on the output from 'uname -srm'
-# $Linux:2.*.7:i666
-# file=/foo/bar3
-# $end
-#
-# !$Linux:2.*.7:i686
-# file=/foo/bar2
-# $end
-#
-#####################################################################
owner => root,
group => root,
mode => 444,
- source => "puppet:///samhain/samhainrc",
+ source => [ "puppet:///samhain/per-host/$fqdn/samhainrc",
+ "puppet:///samhain/common/samhainrc" ],
require => Package["samhain"],
notify => Exec["samhain reload"],
}
projects / mirror / dsa-puppet.git / commitdiff