modules/exim/templates/eximconf.erb

   1 ##
   2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
   3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
   4 ##
   5
   6 # This is the main exim4 configuration file based on the 28.08.05 version by
   7 # ametzler
   8
   9 # The configuration file uses a set of rules to generate an
  10 # acceptable mail environment for debian.org machines. It deviates
  11 # considerably from what could be considered a standard exim configuration.
  12
  13 # This configuration file brings in the necessary information from
  14 # other databases stored in /etc/exim/ and the files distributed by ud-ldap
  15
  16 # This file is independent of the local host, it should not be changed
  17 # per machine. primary_hostname is used in all places that require per-host
  18 # settings.
  19
  20 # The configuration files in /etc/exim are as follows:
  21 #  locals - This is a list of domains that are considered local. A local
  22 #           domain is essential one that deliveries to /var/mail
  23 #           will be attempted. The users available for local delivery
  24 #           comes from /etc/passwd and /etc/aliases. Wildcards are not
  25 #           permitted.
  26 #  virtualdomains - This is a list of all virtual domains. A virtual domain
  27 #           is much like a local domain, execpt that the delivery location
  28 #           and allowed set of users is controlled by a virtual domain
  29 #           alias file and not /etc/passwd. Wildcards are permitted
  30 #  relayhosts - Hostnames that can send any arbitarily addressed mail to
  31 #           us. This is primarily only usefull for emergancy 'queue
  32 #           flushing' operations, but should be populated with a list
  33 #           of trusted machines. Wildcards are not permitted
  34 #  bsmtp_domains - Domains that we deliver locally via bsmtp
  35 <%- if nodeinfo['mailrelay'] -%>
  36 #  mailhubdomains - Domains for which we are the MX, but the mail is relayed
  37 #           elsewhere.  This is designed for use with small volume or
  38 #           restricted machines that need to use a smarthost for mail
  39 #           traffic.  We will relay for them based on ssl cert validation
  40 #           but we need to teach exim how to route the mail to them.  This is
  41 #           that list.
  42 <%- end -%>
  43
  44 # Exim's wildcard mechanism is a bit odd in that to say "any address in
  45 # debian.org including debian.org" you must use two patterns,
  46 #   *.debian.org
  47 #   debian.org
  48 # Also you can only place a * before a . and as the first char in a string.
  49 # Wildcards always match last so they may be used as a catchall.
  50
  51 # Further details can be found in each of the files.
  52
  53 # Usefull exim commands:
  54 #  exim4 -qf  - Try sending all messages right now, including frozen ones
  55 #  exim4 -bt foo@blah - Write what exim would do if it saw the address
  56 #                      Great for testing virtual domains and forward files
  57
  58 # Special Features for users:
  59 # .forward-foo - is understood as an extension address for bar-foo@cow.com
  60 # .forward-default - is understood to be a catch all for bar-*@cow.com
  61 # .procmailrc - with no .forward file invokes procmail for delivery
  62 #               automatically.
  63
  64 # For virtual domains the first lookup is done against a linear text
  65 # database called 'aliases', then .forward files are consulted. Exim
  66 # filtering is available for these .forward files only. .forward-default
  67 # is the universal catch all for everything not handled.
  68
  69 # Heuristic check (none bad enough to cause a hard reject, but in aggregate
  70 # will trigger things like rcpt to rate limiting or possibly a reject if
  71 # enough hits are triggered.
  72 #
  73 # value is stored in acl_c_scr
  74
  75 ######################################################################
  76 #                    MAIN CONFIGURATION SETTINGS                     #
  77 ######################################################################
  78
  79 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
  80 perl_startup = do '/etc/exim4/exim_surbl.pl'
  81 <%- end -%>
  82
  83 # These options specify the Access Control Lists (ACLs) that
  84 # are used for incoming SMTP messages - after the RCPT and DATA
  85 # commands, respectively.
  86
  87 acl_smtp_helo = check_helo
  88 acl_smtp_rcpt = ${if ={$interface_port}{587} {check_submission}{check_recipient}}
  89 acl_smtp_data = check_message
  90 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
  91 acl_smtp_mime = acl_check_mime
  92 <%- end -%>
  93 acl_smtp_predata = acl_check_predata
  94
  95 # accept domain literal syntax in e-mail addresses. To actually make use of
  96 # this a router is also required
  97 allow_domain_literals = true
  98
  99 # This setting defines a named domain list called
 100 # local_domains. It will be referenced
 101 # later on by the syntax "+local_domains".
 102 # Other domain and host lists may follow.
 103 # @ is the local FQDN, @[] matches the IP adress of any local interface.
 104
 105 domainlist local_domains = @ : \
 106     @[] : \
 107     localhost : \
 108     ${if exists {/etc/exim4/locals}{lsearch;/etc/exim4/locals}}
 109
 110 domainlist virtual_domains = partial-lsearch;/etc/exim4/virtualdomains
 111
 112 domainlist submission_domains = ${if exists {/etc/exim4/submission-domains}{/etc/exim4/submission-domains}{}}
 113
 114 domainlist bsmtp_domains = ${if exists {/etc/exim4/bsmtp}{partial-lsearch;/etc/exim4/bsmtp}{}}
 115
 116 domainlist handled_domains = +local_domains : +virtual_domains : +bsmtp_domains
 117
 118 localpartlist local_only_users = lsearch;/etc/exim4/localusers
 119
 120 localpartlist postmasterish = postmaster : abuse : hostmaster
 121
 122 hostlist debianhosts = <; ; 127.0.0.1 ; ::1 ; /var/lib/misc/thishost/debianhosts ; 89.16.166.49 ; 82.195.75.76 ; 2001:41b8:202:deb:bab5:0:52c3:4b4c
 123
 124 hostlist reservedaddrs = <%= nodeinfo['reservedaddrs'] %>
 125
 126 <%- if nodeinfo['mailrelay'] -%>
 127 # Domains we relay for; that is domains that aren't considered local but we
 128 # accept mail for them.
 129 domainlist mailhubdomains = lsearch;/etc/exim4/manualroute
 130
 131 <%- end -%>
 132 <%- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true" -%>
 133 tls_certificate = /etc/exim4/ssl/thishost.crt
 134 tls_privatekey = /etc/exim4/ssl/thishost.key
 135 tls_try_verify_hosts = *
 136 tls_verify_certificates = /etc/exim4/ssl/ca.crt
 137 tls_crl = /etc/exim4/ssl/ca.crl
 138
 139 <%- end -%>
 140 # The setting below causes Exim to do a reverse DNS lookup on all incoming
 141 # IP calls, in order to get the true host name. If you feel this is too
 142 # expensive, you can specify the networks for which a lookup is done, or
 143 # remove the setting entirely.
 144 host_lookup = *
 145 # dns_ipv4_lookup = !localhost (disabled upon sgrans request, zobel, 2010-03-16)
 146
 147 # If this option is set, then any process that is running as one of the
 148 # listed users may pass a message to Exim and specify the sender's
 149 # address using the "-f" command line option, without Exim's adding a
 150 # "Sender" header.
 151
 152 untrusted_set_sender = *
 153
 154 # Some operating systems use the "gecos" field in the system password file
 155 # to hold other information in addition to users' real names. Exim looks up
 156 # this field when it is creating "sender" and "from" headers. If these options
 157 # are set, exim uses "gecos_pattern" to parse the gecos field, and then
 158 # expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
 159 # by the pattern.
 160
 161 gecos_pattern = ^([^,:]*)
 162 gecos_name = $1
 163
 164 # This tells exim to immediately discard error messages (ie double bounces).
 165 ignore_bounce_errors_after = 0s
 166 auto_thaw = 1d
 167 timeout_frozen_after=14d
 168
 169 message_size_limit = 100M
 170 message_logs = false
 171 smtp_accept_max_per_host = ${if match_ip {$sender_host_address}{+debianhosts}{0}{7}}
 172 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
 173 smtp_accept_max = 300
 174 smtp_accept_queue = 200
 175 smtp_accept_queue_per_connection = 50
 176 smtp_accept_reserve = 25
 177 <%- else -%>
 178 smtp_accept_max = 30
 179 smtp_accept_queue = 20
 180 smtp_accept_queue_per_connection = 10
 181 smtp_accept_reserve = 5
 182 <%- end -%>
 183 smtp_reserve_hosts = +debianhosts
 184
 185 split_spool_directory = true
 186 check_spool_inodes = 200
 187 check_spool_space  = 20M
 188
 189 delay_warning =
 190
 191 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
 192 message_body_visible = 5000
 193 queue_run_max = 50
 194 deliver_queue_load_max = 50
 195 queue_only_load = 35
 196 smtp_load_reserve = 20
 197 <%- else -%>
 198 queue_run_max = 5
 199 deliver_queue_load_max = 10
 200 queue_only_load = 5
 201 <%- end -%>
 202 queue_list_requires_admin = false
 203
 204 <%- if has_variable?("clamd") && clamd == "true" -%>
 205 av_scanner = clamd:/var/run/clamav/clamd.ctl
 206 <%- end -%>
 207
 208 <%=
 209 ports = []
 210 out = "daemon_smtp_ports = "
 211 ports << 25
 212
 213 if nodeinfo['bugsmaster'] or nodeinfo['bugsmx']
 214   ports << 587
 215 end
 216
 217 if not nodeinfo['mail_port'].to_s.empty?
 218   ports << nodeinfo['mail_port']
 219 end
 220
 221 if nodeinfo['mailrelay']
 222   ports << nodeinfo['smarthost_port']
 223 end
 224
 225 out += ports.uniq.sort.join(" : ")
 226 out
 227 %>
 228
 229 admin_groups = adm
 230 remote_sort_domains = *.debian.org:*.debian.net
 231
 232 pipelining_advertise_hosts = !*
 233 <%- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true" -%>
 234 tls_advertise_hosts = *
 235 <%- end -%>
 236 smtp_enforce_sync = true
 237
 238 log_selector = +tls_cipher +tls_peerdn +queue_time +deliver_time +smtp_connection +smtp_incomplete_transaction +smtp_confirmation
 239
 240 received_header_text = Received: ${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
 241                                  {${if def:sender_ident {from ${quote_local_part:$sender_ident} }}${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
 242                                  ${if and {{eq {$tls_certificate_verified}{1}}{def:tls_peerdn}}{from $tls_peerdn (verified)\n\t}}\
 243                                  by $primary_hostname ${if def:received_protocol {with $received_protocol}} ${if def:tls_cipher {($tls_cipher)\n\t}}\
 244                                  (Exim $version_number)\n\t\
 245                                  ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}\
 246                                  id $message_exim_id${if def:received_for {\n\tfor $received_for}}
 247
 248 # macro definitions.
 249 # Do not wrap!
 250 VDOMAINDATA = ${lookup{$domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
 251 WHITELIST = ${if match_domain{$domain}{+virtual_domains}\
 252             {${if exists {${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}\
 253             {${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}{$value}{}}}{}}}\
 254             {/etc/exim4/whitelist} } : \
 255             ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-whitelist}{$value}{}}
 256 GREYLIST_LOCAL_PARTS = ${if match_domain{$domain}{+virtual_domains}\
 257                        {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
 258                        {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
 259                        {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}}}} : \
 260                        ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}
 261 RT_QUEUE_MAP = /srv/rt.debian.org/mail/rt_queue_map
 262
 263 ######################################################################
 264 #                        ACL CONFIGURATION                           #
 265 ######################################################################
 266 begin acl
 267
 268 acl_spamlovers:
 269   # There are a few profiles that don't want much smtp time checking of
 270   # mail.  It's easier to track them in one place
 271
 272   accept  condition      = ${if eq {$acl_m_prf}{PopconMail}}
 273   accept  condition      = ${if eq {$acl_m_prf}{BugsMail}}
 274   deny
 275
 276 acl_getprofile:
 277   # This is a bad hack to reset the variable, by defining it be something
 278   # never referenced.
 279
 280   warn    set acl_m_rprf = $acl_m_undefined
 281
 282   warn    recipients     = survey@popcon.debian.org
 283           set acl_m_rprf = PopconMail
 284
 285   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 286
 287   warn    local_parts    = +local_only_users
 288           domains        = +local_domains
 289           hosts          = !+debianhosts
 290           set acl_m_rprf = localonly
 291
 292   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 293
 294 <%- if nodeinfo['rtmaster'] -%>
 295   warn    domains        = rt.debian.org
 296           set acl_m_rprf = RTMail
 297
 298   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 299
 300 <%- end -%>
 301 <%- if nodeinfo['bugsmx'] -%>
 302   warn    domains        = bugs.debian.org
 303           set acl_m_rprf = BugsMail
 304
 305   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 306
 307 <%- end -%>
 308 <%- if nodeinfo['packagesmaster'] -%>
 309   warn    domains        = packages.debian.org
 310           set acl_m_rprf = PackagesMail
 311
 312   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 313
 314 <%- end -%>
 315 <%- if nodeinfo['packagesqamaster'] -%>
 316   warn    recipients     = owner@packages.qa.debian.org : postmaster@packages.qa.debian.org
 317           set acl_m_rprf = PTSOwner
 318
 319   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 320
 321   warn    senders        = :
 322           domains        = packages.qa.debian.org
 323           condition      = ${if match{$local_part}{\N^bounces+\N}}
 324           set acl_m_rprf = PTSListBounce
 325
 326   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 327
 328   warn    domains        = packages.qa.debian.org
 329           set acl_m_rprf = PTSMail
 330
 331   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 332
 333 <%- end -%>
 334   warn    recipients     = change@db.debian.org : changes@db.debian.org : chpasswd@db.debian.org : ping@db.debian.org : recommend@nm.debian.org
 335           set acl_m_rprf = DBSignedMail
 336
 337   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 338
 339   warn    domains        = +virtual_domains
 340           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
 341           condition      = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{markup}}
 342           set acl_m_rprf = markup
 343
 344   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 345
 346   warn    domains        = +virtual_domains
 347           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
 348           condition      = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{blackhole}}
 349           set acl_m_rprf = blackhole
 350
 351   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 352
 353   warn    domains        = +virtual_domains
 354           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
 355           condition      = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{markup}}
 356           set acl_m_rprf = markup
 357
 358   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 359
 360   warn    domains        = +virtual_domains
 361           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
 362           condition      = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{blackhole}}
 363           set acl_m_rprf = blackhole
 364
 365   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 366
 367   warn    domains        = +local_domains
 368           condition      = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{markup}}
 369           set acl_m_rprf = markup
 370
 371   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 372
 373   warn    domains        = +local_domains
 374           condition      = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{blackhole}}
 375           set acl_m_rprf = blackhole
 376
 377   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 378
 379   warn    set acl_m_rprf = normal
 380
 381   accept
 382
 383 check_helo:
 384
 385   warn    set acl_c_scr    = 0
 386
 387 <%- if nodeinfo['mailrelay'] -%>
 388   accept  verify   = certificate
 389
 390 <%- end -%>
 391 <%- if nodeinfo['smarthost'].empty? -%>
 392   # These are in HELO acl so that they are only run once.  They increment a counter,
 393   # so we don't want it to increment per rcpt to.
 394
 395   warn    dnslists       = list.dnswl.org&0.0.0.3
 396           log_message    = Hit on list.dnswl.org for $sender_host_address
 397           set acl_c_scr  = ${eval:$acl_c_scr-30}
 398
 399   warn    dnslists       = list.dnswl.org&0.0.0.2
 400           log_message    = Hit on list.dnswl.org for $sender_host_address
 401           set acl_c_scr  = ${eval:$acl_c_scr-20}
 402
 403   warn    dnslists       = list.dnswl.org
 404           log_message    = Hit on list.dnswl.org for $sender_host_address
 405           set acl_c_scr  = ${eval:$acl_c_scr-10}
 406
 407   warn    condition      = ${if isip {$sender_helo_name}{true}{false}}
 408           log_message    = remote host used IP address in HELO/EHLO greeting
 409           set acl_c_scr  = ${eval:$acl_c_scr+20}
 410
 411   warn    !hosts         = +debianhosts
 412           condition      = ${if eq{$host_lookup_failed}{1}}
 413           set acl_c_scr  = ${eval:$acl_c_scr+20}
 414
 415   warn    !hosts         = +debianhosts
 416           condition      = ${if eq{$host_lookup_failed}{0}}
 417           condition      = ${if match{$sender_host_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
 418           set acl_c_scr  = ${eval:$acl_c_scr+20}
 419
 420   warn    !hosts         = +debianhosts
 421           condition      = ${if match{$sender_helo_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
 422           set acl_c_scr  = ${eval:$acl_c_scr+20}
 423
 424   warn    !hosts         = +debianhosts
 425           dnslists       = dul.dnsbl.sorbs.net
 426           set acl_c_scr  = ${eval:$acl_c_scr+15}
 427
 428   # If the sender's helo name is empty, the message will be rejected later
 429   # because the helo is empty.  If the rDNS lookup failed, we are already
 430   # going to greylist them, so no sense worrying about it here.  Finally,
 431   # if rDNS does not match helo name (both lower cased first), greylist.
 432
 433   warn    !hosts         = +debianhosts
 434           condition      = ${if eq {$host_lookup_failed}{1}{no}{yes}}
 435           condition      = ${if def:sender_helo_name {yes}{no}}
 436           condition      = ${if eq {${lc:$sender_helo_name}}{${lc:$sender_host_name}}{no}{yes}}
 437           log_message    = HELO doesn't match rDNS
 438           set acl_c_scr  = ${eval:$acl_c_scr+8}
 439
 440   # Regexes of doom
 441   # matches 098325879 - looks fishy
 442
 443   warn condition        = ${if and { \
 444                                      { !match{$sender_helo_name}{\N^\[.+\]$\N} } \
 445                                      { !match{$sender_helo_name}{\N^(?i)((?=[^-])[a-z0-9-]*[a-z0-9]\.)+[a-z]{2,6}$\N} } \
 446                                     } \
 447                             }
 448        log_message      = non-FQDN HELO
 449        set acl_c_scr    = ${eval:$acl_c_scr+12}
 450
 451   # Matches DOMAIN99.com - looks bad
 452
 453   warn condition       = ${if match {$sender_helo_name}{\N^[A-Z]+[A-Z0-9\-]+\.[A-Za-z0-9]+$\N}}
 454        log_message     = SHOUTING HELO
 455        set acl_c_scr   = ${eval:$acl_c_scr+7}
 456
 457   # Random HELO (run of 7 consonants) (constructed by viruses).  We purposefully
 458   # skip matching on machines named .*smtp.*, since that's 4 already.  This is a fairly
 459   # naive test, so it's not worth much
 460
 461   warn condition       = ${if match {${lc:$sender_helo_name}}{smtp}{no}{yes}}
 462        condition       = ${if match {${lc:$sender_helo_name}}{\N^[a-z0-9]+\.[a-z]+$\N}}
 463        condition       = ${if match {${lc:$sender_helo_name}}{\N.*[bcdfghjklmnpqrstvwxz]{7,}.*\.[a-z]+$\N}}
 464        log_message     = random HELO
 465        set acl_c_scr   = ${eval:$acl_c_scr+5}
 466
 467 <%- else -%>
 468   drop !hosts          = +debianhosts
 469        log_message     = mail from non-d.o host
 470        message         = Interesting.  I doubt that should have happened.
 471
 472 <%- end -%>
 473   # Implicit, but simpler to just say it
 474   accept
 475
 476 #!!# ACL that is used after the RCPT command on the submission port
 477 check_submission:
 478
 479   # Accept if the source is local SMTP (i.e. not over TCP/IP).
 480   # We do this by testing for an empty sending host field.
 481   accept  hosts = +debianhosts
 482
 483 <%- if nodeinfo['mailrelay'] -%>
 484   accept  verify   = certificate
 485
 486 <%- end -%>
 487   # Defer after too many bad RCPT TO's.  Legit MTAs will retry later.
 488   # This is a rough pass at preventing addres harvesting or other mail blasts.
 489
 490   defer  log_message   = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
 491          message       = Too many bad recipients, try again later
 492          condition     = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
 493
 494   defer
 495           ratelimit      = 5 / 60m / per_rcpt / $sender_host_address
 496           !hosts         = +debianhosts
 497           message        = sorry, only 5 reports per hour for submission
 498
 499   accept  domains  = +local_domains
 500           hosts    = +debianhosts
 501           endpass
 502           verify   = recipient
 503
 504 <%- if nodeinfo['mailrelay'] -%>
 505   accept  domains  = +mailhubdomains
 506           endpass
 507           verify   = recipient/callout=30s,defer_ok,use_sender,no_cache
 508
 509 <%- end -%>
 510   accept  domains  = +submission_domains
 511           endpass
 512           verify   = recipient
 513
 514   deny    message = relay not permitted
 515
 516 #!!# ACL that is used after the RCPT command
 517 check_recipient:
 518
 519 <%- if nodeinfo['mailrelay'] -%>
 520   accept  verify   = certificate
 521
 522 <%- end -%>
 523   accept  hosts = <; ::1 ; 127.0.0.1 ; @
 524   warn    acl           = acl_getprofile
 525           condition     = ${if eq{$acl_m_prf}{}}
 526           set acl_m_prf = $acl_m_rprf
 527
 528   defer   condition     = ${if eq{$acl_m_prf}{$acl_m_rprf}{no}{yes}}
 529           message       = Different profile, please retry
 530           log_message   = Only one profile at a time, please
 531
 532   # Defer after too many bad RCPT TO's.  Legit MTAs will retry later.
 533   # This is a rough pass at preventing addres harvesting or other mail blasts.
 534
 535   defer  log_message   = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
 536          !acl          = acl_spamlovers
 537          message       = Too many bad recipients, try again later
 538          !hosts        = +debianhosts
 539          condition     = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
 540
 541   # Dump spambots that are so stupid they say helo as our IP address
 542
 543   drop   !hosts        = +debianhosts
 544          !acl          = acl_spamlovers
 545          condition     = ${if eq {$sender_helo_name}{$interface_address}{yes}{no}}
 546          message       = HELO mismatch Forged HELO for ($sender_helo_name)
 547
 548   # Also for spambots that say helo as us or one of our domains
 549
 550   drop   !hosts        = +debianhosts
 551          !acl          = acl_spamlovers
 552          condition     = ${if match_domain{$sender_helo_name}{$primary_hostname:+handled_domains}}
 553          condition     = ${if !match{$sender_host_name}{${rxquote:$sender_helo_name}\N$\N}}
 554          message       = HELO mismatch Forged HELO for ($sender_helo_name)
 555
 556   # This logic gives you a list of commonly forged domains in helo to reject against
 557
 558   warn set acl_m_frg   = ${lookup{$sender_helo_name} \
 559                            nwildlsearch{/etc/exim4/helo-check} \
 560                           {${if eq{$value}{}{$sender_helo_name}{$value}}}{}}
 561
 562   # This is a failsafe in case DNS fails - we defer instead of hard reject if they
 563   # say helo as a name in the list but we can't look them up
 564
 565   defer  !hosts        = +debianhosts
 566          !acl          = acl_spamlovers
 567          condition     = ${if eq{$acl_m_frg}{}{no}{yes}}
 568          condition     = ${if eq{$sender_host_name}{}{yes}{no}}
 569          condition     = ${if eq{$host_lookup_failed}{1}{no}{yes}}
 570          message       = Access temporarily denied. Resolve failed PTR for $sender_host_address
 571
 572   # If DNS works, go ahead and reject them
 573
 574   drop   !hosts        = +debianhosts
 575          !acl          = acl_spamlovers
 576          condition     = ${if and { {!eq{$acl_m_frg}{}}{!match{$sender_host_name}{${rxquote:$acl_m_frg}\N$\N}}}{yes}{no}}
 577          message       = HELO mismatch Forged HELO for ($sender_helo_name)
 578
 579   # disabled accounts don't even get local mail.
 580   deny   domains       = +virtual_domains
 581          local_parts   = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}\
 582                                      {lsearch;${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}\
 583                                      {}}
 584          message       = ${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}{$value}}
 585
 586   deny   local_parts   = lsearch;/var/lib/misc/$primary_hostname/mail-disable
 587          domains       = +local_domains
 588          message       = ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-disable}{$value}}
 589
 590   deny   domains       = +virtual_domains
 591          local_parts   = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
 592                                      {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
 593                                      {}}
 594          hosts         = !+debianhosts
 595          message       = mail for <$local_part@$domain> only accepted from debian.org machines
 596
 597   # Accept if the source is local SMTP (i.e. not over TCP/IP).
 598   # We do this by testing for an empty sending host field.
 599   accept  hosts = :
 600
 601   deny    domains       = +handled_domains
 602           local_parts   = ^[.] : ^.*[@%!/|]
 603
 604   deny    domains       = !+handled_domains
 605           local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
 606
 607 # forwards mail to @d.o address, even if it's a bounce from master, no reply
 608 # from source address; rejecting all mail now.
 609   deny    recipients    = mendoza@debian.org
 610           hosts         = 65.110.39.147 : 64.39.31.15
 611           message       = <mendoza@kenny.linuxsis.net> cannot forward here while mailer-daemon mail is not caught
 612
 613   deny    condition     = ${lookup{$sender_address_local_part}lsearch{/etc/exim4/localusers}{true}}
 614           sender_domains= +local_domains
 615           hosts         = !+debianhosts
 616           message       = mail from <$sender_address> not allowed externally
 617
 618   deny    sender_domains= +virtual_domains
 619           condition     = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localusers}}}}
 620           condition     = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/localusers}}}{true}}
 621           hosts         = !+debianhosts
 622           message       = mail from <$sender_address> not allowed externally
 623
 624   deny    condition     = ${if match_domain{$sender_address_domain}{+virtual_domains}{1}{0}}
 625           condition     = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
 626           condition     = ${if match_local_part {$sender_address_local_part}{${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
 627           message       = no mail should ever come from <$sender_address>
 628
 629   warn    condition     = ${if eq{$acl_m_prf}{localonly}}
 630           set acl_m_lrc = ${if eq{$acl_m_lrc}{}{$local_part@$domain}{$acl_m_lrc, $local_part@$domain}}
 631
 632 <%- if nodeinfo['packagesmaster'] -%>
 633   warn    condition      = ${if eq {$acl_m_prf}{PackagesMail}}
 634           condition      = ${if eq {$sender_address}{$local_part@$domain}}
 635           message        = X-Packages-FromTo-Same: yes
 636
 637 <%- end -%>
 638   deny    condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 639           !verify        = sender
 640
 641   defer   !hosts         = +debianhosts
 642           condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 643           condition      = ${if >{${eval:$acl_c_scr+0}}{0}}
 644           ratelimit      = 10 / 60m / per_rcpt / $sender_host_address
 645           message        = slow down (no reverse dns, mismatched ehlo, dialup, or in blacklists)
 646
 647 <%- if has_variable?("policydweight") && policydweight == "true" -%>
 648   # Check with policyd-weight - this only works with a version after etch's,
 649   # sadly.  etch's version attempts to hold the socket open, since that's what
 650   # postfix expects.  Exim, on the other hand, expects the remote side to close
 651   # the socket when it's finished sending data, so it see each transaction as
 652   # an incomplete read.  I'm sure there's a way we could force exim to do
 653   # something sick and clever to force either the interpretation or the socket
 654   # closure, but I'm fairly sure it's now worth it, since the backport of
 655   # policyd-weight is trivial.
 656   warn  !hosts         = +debianhosts
 657         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 658         set acl_m_pw   = ${readsocket{inet:127.0.0.1:12525}\
 659                           {request=smtpd_access_policy\n\
 660                            protocol_state=RCPT\n\
 661                            protocol_name=${uc:$received_protocol}\n\
 662                            helo_name=$sender_helo_name\n\
 663                            queue_id=$message_exim_id\n\
 664                            sender=$sender_address\n\
 665                            recipient=$local_part@$domain\n\
 666                            recipient_count=$rcpt_count\n\
 667                            client_address=$sender_host_address\n\
 668                            client_name=$sender_host_name\n\
 669                            reverse_client_name=$sender_host_name\n\
 670                            instance=$sender_host_address.$sender_address.$sender_helo_name\n\n}\
 671                           {20s}{\n}{socket failure}}
 672
 673   # Defer on socket error
 674   defer !hosts         = +debianhosts
 675         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 676         condition      = ${if eq{$acl_m_pw}{socket failure}{yes}{no}}
 677         message        = Cannot connect to policyd-weight. Please try again later.
 678
 679   # Set proposed action to $acl_m_act and message to $acl_m_mes
 680   warn  !hosts         = +debianhosts
 681         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 682         set acl_m_mes  = ${extract{action}{$acl_m_pw}}
 683         set acl_m_act  = ${sg{$acl_m_pw}{\Naction=[^ ]+ (.*)\n\n\N}{\$1}}
 684
 685   # Add X-policyd-weight header line to message
 686   warn  !hosts         = +debianhosts
 687         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 688         message        = $acl_m_mes
 689         condition      = ${if eq{$acl_m_act}{PREPEND}{yes}{no}}
 690
 691   # Write log message, if policyd-weight can't run checks
 692   warn  !hosts         = +debianhosts
 693         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 694         log_message    = policyd-weight message: $acl_m_mes
 695         condition      = ${if eq{$acl_m_act}{DUNNO}{yes}{no}}
 696
 697   # Deny mails which policyd-weight thinks are spam
 698   deny  !hosts         = +debianhosts
 699         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 700         message        = policyd-weight said: $acl_m_mes
 701         condition      = ${if eq{$acl_m_act}{550}{yes}{no}}
 702
 703   # Defer messages when policyd-weight suggests so.
 704   defer  !hosts         = +debianhosts
 705          condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 706          message        = policyd-weight said: $acl_m_mes
 707          condition      = ${if eq{$acl_m_act}{450}{yes}{no}}
 708
 709 <%- end -%>
 710 <%- if nodeinfo['rtmaster'] -%>
 711   warn    condition     = ${if eq{$acl_m_prf}{RTMail}}
 712           set acl_m12   = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}} {RTMailRecipientHasSubaddress}}}}
 713
 714 <%- end -%>
 715 <%- if has_variable?("greylistd") && greylistd == "true" -%>
 716   defer
 717     message  = $sender_host_address is not yet authorized to deliver mail from <$sender_address> to <$local_part@$domain>.
 718     log_message = greylisted.
 719     local_parts    = ${if match_domain{$domain}{+virtual_domains}\
 720                      {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
 721                      {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
 722                      {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}} : \
 723                      ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}}}
 724     !senders       = :
 725     !hosts         = : +debianhosts : WHITELIST : \
 726                      ${if exists {/etc/greylistd/whitelist-hosts}\
 727                                  {/etc/greylistd/whitelist-hosts}{}} : \
 728                      ${if exists {/var/lib/greylistd/whitelist-hosts}\
 729                                  {/var/lib/greylistd/whitelist-hosts}{}}
 730     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 731     !authenticated = *
 732     domains        = +handled_domains
 733     condition      = ${readsocket{/var/run/greylistd/socket}\
 734                                  {--grey \
 735                                   $sender_host_address \
 736                                   $sender_address \
 737                                   $local_part@$domain}\
 738                                  {5s}{}{false}}
 739
 740 <%- elsif has_variable?("postgrey") && postgrey == "true" -%>
 741   # next three are greylisting, inspired by http://www.bebt.de/blog/debian/archives/2006/07/30/T06_12_27/index.html
 742   # this adds acl_m_grey if there isn't one (so unique per message)
 743   warn
 744     !senders       = :
 745     !hosts         = : +debianhosts : WHITELIST
 746     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 747     condition      = ${if def:acl_m_grey {no}{yes}}
 748     set acl_m_grey = $pid.$tod_epoch.$sender_host_port
 749
 750   # and defers the message if postgrey thinks it should be defered ...
 751   defer
 752     !senders       = :
 753     !hosts         = : +debianhosts : WHITELIST
 754     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 755     !authenticated = *
 756     domains        = +handled_domains
 757     local_parts    = GREYLIST_LOCAL_PARTS
 758     set acl_m_pgr  = request=smtpd_access_policy\n\
 759                      protocol_state=RCPT\n\
 760                      protocol_name=${uc:$received_protocol}\n\
 761                      instance=${acl_m_grey}\n\
 762                      helo_name=${sender_helo_name}\n\
 763                      client_address=${substr_-3:${mask:$sender_host_address/24}}\n\
 764                      client_name=${sender_host_name}\n\
 765                      sender=${sender_address}\n\
 766                      recipient=$local_part@$domain\n\n
 767     set acl_m_pgr  = ${sg{\
 768                          ${readsocket{/var/run/postgrey/socket}{$acl_m_pgr}\
 769                                {5s}{}{action=DUNNO}}\
 770                      }{action=}{}}
 771     message        = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
 772     log_message    = greylisted.
 773     condition      = ${if eq{${uc:${substr{0}{5}{$acl_m_pgr}}}}{DEFER}}
 774
 775  # ... or adds a header with information about how long the delay was
 776  warn
 777     !senders       = :
 778     !hosts         = : +debianhosts : WHITELIST
 779     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 780     !authenticated = *
 781     domains        = +handled_domains
 782     local_parts    = GREYLIST_LOCAL_PARTS
 783     condition      = ${if eq{${uc:${substr_0_7:$acl_m_pgr}}}{PREPEND}}
 784     message        = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
 785
 786 <%- end -%>
 787   accept  local_parts   = +postmasterish
 788           domains       = +handled_domains
 789
 790   deny    hosts        = ${if exists{/etc/exim4/host_blacklist}{/etc/exim4/host_blacklist}{}}
 791           message      = I'm terribly sorry, but it seems you have been blacklisted
 792           log_message  = blacklisted IP
 793
 794   deny   log_message   = <$sender_address> is blacklisted
 795          senders       = ${if exists{/etc/exim4/blacklist}{/etc/exim4/blacklist}{}}
 796          message       = We have blacklisted <$sender_address>.  Please stop mailing us
 797
 798 <%- if nodeinfo['smarthost'].empty? -%>
 799   deny    message  = host $sender_host_address is listed in $dnslist_domain; see $dnslist_text
 800           dnslists = ${if match_domain{$domain}{+virtual_domains}\
 801                      {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}\
 802                      {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}{$value}{}}}{}}}\
 803                      {${lookup{$local_part}lsearch{/etc/exim4/rbllist}{$value}{}}}} : \
 804                      ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rbl}{$value}{}}
 805           domains       = +handled_domains
 806           !hosts        = +debianhosts : WHITELIST
 807
 808 <%- end -%>
 809   deny    message  = domain $sender_address_domain is listed in $dnslist_domain; see $dnslist_text
 810           dnslists = ${if match_domain{$domain}{+virtual_domains}\
 811                      {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}\
 812                      {${expand:${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}{$value}{}}}}{}}}\
 813                      {${expand:${lookup{$local_part}lsearch{/etc/exim4/rhsbllist}{$value}{}}}}} : \
 814                      ${expand:${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rhsbl}{$value}{}}}
 815           domains       = +handled_domains
 816           !hosts        = +debianhosts : WHITELIST
 817
 818 <%- if nodeinfo['smarthost'].empty? -%>
 819   deny    domains  = +handled_domains
 820           local_parts = ${if match_domain{$domain}{+virtual_domains}\
 821                         {${if exists {${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}\
 822                         {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}{$local_part}{}}}{}}}\
 823                         {${lookup{$local_part}lsearch{/etc/exim4/callout_users}{$local_part}{}}}} : \
 824                         ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-callout}{$local_part}{}}
 825           !hosts   = +debianhosts : WHITELIST
 826           !verify  = sender/callout=90s,maxwait=300s
 827
 828 <%- end -%>
 829 <%- if nodeinfo['mailrelay'] -%>
 830   accept  domains  = +mailhubdomains
 831           endpass
 832           verify   = recipient/callout=30s,defer_ok,use_sender,no_cache
 833
 834 <%- end -%>
 835   accept  domains  = +handled_domains
 836           endpass
 837           verify   = recipient/defer_ok
 838
 839   accept  hosts         = +debianhosts
 840
 841   accept  authenticated = *
 842
 843   deny    message = relay not permitted
 844
 845 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
 846 acl_check_mime:
 847
 848  accept  verify        = certificate
 849  accept  hosts         = +debianhosts
 850
 851  discard condition     = ${if <{$message_size}{256000}}
 852          condition     = ${if eq {$acl_m_prf}{blackhole}}
 853          set acl_m_srb = ${perl{surblspamcheck}}
 854          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 855          log_message   = discarded surbl message for $recipients
 856
 857   deny   condition     = ${if <{$message_size}{256000}}
 858          condition     = ${if eq {$acl_m_prf}{markup}{no}{yes}}
 859          condition     = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 860          set acl_m_srb = ${perl{surblspamcheck}}
 861          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 862          log_message   = $acl_m_srb
 863          message       = $acl_m_srb
 864
 865   warn   condition     = ${if <{$message_size}{256000}}
 866          condition     = ${if eq {$acl_m_prf}{markup}}
 867          set acl_m_srb = ${perl{surblspamcheck}}
 868          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 869          message       = X-Surbl-Hit: $primary_hostname: $acl_m_srb
 870
 871   accept
 872
 873 <%- end -%>
 874 acl_check_predata:
 875   deny   condition     = ${if eq{$acl_m_prf}{localonly}}
 876          message       = mail for $acl_m_lrc is only accepted internally
 877
 878   accept
 879
 880
 881 #!!# ACL that is used after the DATA command
 882 check_message:
 883 <%- if nodeinfo['rtmaster'] -%>
 884   deny    condition = ${if eq {$acl_m_prf}{RTMail}}
 885           condition = ${if and{{!match {${lc:$rh_Subject:}} {debian rt}} \
 886                                {!match {${lc:$rh_Subject:]}} {\N\[rt.debian.org \N}} \
 887                                {!match {$acl_m12}{RTMailRecipientHasSubaddress}}}}
 888           message  = messages to the Request Tracker system require a subject tag or a subaddress
 889
 890 <%- end -%>
 891 <%- if nodeinfo['packagesqamaster'] -%>
 892   deny    !hosts  = +debianhosts : 217.196.43.134
 893           condition = ${if eq {$acl_m_prf}{PTSMail}}
 894           condition = ${if def:h_X-PTS-Approved:{false}{true}}
 895           message   = messages to the PTS require an X-PTS-Approved header
 896
 897 <%- end -%>
 898   deny    condition      = ${if eq {$acl_m_prf}{DBSignedMail}}
 899           condition      = ${if and {{!match {$message_body}{PGP MESSAGE}}              \
 900                                      {!match {$message_body}{PGP SIGNED MESSAGE}}       \
 901                                      {!match {$message_body}{PGP SIGNATURE}}            \
 902                                      {!match {$header_content-type:}{multipart/signed}} \
 903                                      {!match {$header_content-type:}{pgp}}              \
 904                                     }                                                   \
 905                             }
 906           message        = Mail to this address needs to be PGP-signed
 907
 908   accept  verify    = certificate
 909   accept  hosts     = +debianhosts
 910
 911   deny    condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 912           !verify   = header_syntax
 913           message   = Invalid syntax in the header
 914
 915 # RFC 822 and 2822 say that headers must be ASCII.  This kinda emulates
 916 # postfix's strict_7bit_headers option, but only checks a few common problem
 917 # headers, as there doesn't appear to be an easy way to check them all.
 918   deny
 919           condition       = ${if or {{match {$rh_Subject:}{[\200-\377]}}\
 920                                  {match {$rh_To:}{[\200-\377]}}\
 921                                  {match {$rh_From:}{[\200-\377]}}\
 922                                  {match {$rh_Cc:}{[\200-\377]}}}{true}{false}}
 923           condition       = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 924           message         = improper use of 8-bit data in message header: message rejected
 925
 926   deny
 927           condition       = ${if match {$rh_Subject:}{[^[:print:]]\{8\}}{true}{false}}
 928           condition       = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 929           message         = Your mailer is not RFC 2047 compliant: message rejected
 930
 931 <%- if has_variable?("clamd") && clamd == "true" -%>
 932   discard condition       = ${if eq {$acl_m_prf}{blackhole}}
 933           demime          = *
 934           malware         = */defer_ok
 935           log_message     = discarded malware message for $recipients
 936
 937   deny    condition       = ${if eq {$acl_m_prf}{markup}{no}{yes}}
 938           condition       = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 939           demime          = *
 940           malware         = */defer_ok
 941           message         = malware detected: $malware_name: message rejected
 942
 943   warn    condition       = ${if eq {$acl_m_prf}{markup}}
 944           demime          = *
 945           malware         = */defer_ok
 946           message         = X-malware detected: $malware_name
 947
 948 <%- end -%>
 949 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
 950  discard condition     = ${if <{$message_size}{256000}}
 951          condition     = ${if eq {$acl_m_prf}{blackhole}}
 952          set acl_m_srb = ${perl{surblspamcheck}}
 953          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 954          log_message   = discarded surbl message for $recipients
 955
 956   deny   condition     = ${if <{$message_size}{256000}}
 957          condition     = ${if eq {$acl_m_prf}{markup}{no}{yes}}
 958          condition     = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 959          set acl_m_srb = ${perl{surblspamcheck}}
 960          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 961          log_message   = $acl_m_srb
 962          message       = $acl_m_srb
 963
 964   warn   condition     = ${if <{$message_size}{256000}}
 965          condition     = ${if eq {$acl_m_prf}{markup}}
 966          set acl_m_srb = ${perl{surblspamcheck}}
 967          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 968          message       = X-Surbl-Hit: $primary_hostname: $acl_m_srb
 969
 970 <%- end -%>
 971   # Check header_sender except for survey@popcon.d.o
 972   deny    condition    = ${if eq{$acl_m_prf}{PopconMail}{false}{true}}
 973           !verify      = header_sender
 974           message      = No valid sender found in the From:, Sender: and Reply-to: headers
 975
 976 <%- if nodeinfo['packagesmaster'] -%>
 977   deny  message        = Congratulations, you scored $spam_score points.
 978         log_message    = spam: $spam_score points.
 979         condition      = ${if eq {$acl_m_prf}{PackagesMail}}
 980         !authenticated = *
 981         !verify        = certificate
 982         !hosts         = +debianhosts
 983         condition      = ${if <{$message_size}{256000}}
 984         spam           = pkg_user : true
 985         condition      = ${if >{$spam_score_int}{59}}
 986
 987 <%- end -%>
 988   accept
 989
 990
 991
 992 ######################################################################
 993 #                      REWRITE CONFIGURATION                         #
 994 ######################################################################
 995
 996
 997
 998 begin rewrite
 999
1000 \N^buildd_(.*)@franck\.debian\.org$\N buildd_$1@buildd.debian.org T
1001 \N^buildd_(.*)@klecker\.debian\.org$\N buildd_$1@buildd.debian.org T
1002 *@debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1003 *@people.debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1004 #*@${primary_hostname} "${if exists{/etc/exim4/email-addresses}{${lookup{$1}lsearch{/etc/exim4/email-addresses}{$value}fail}}fail}" fFs
1005 m68k@buildd.debian.org m68k-build@nocrew.org Ttrbc
1006
1007
1008 #!!#######################################################!!#
1009 #!!# Here follow routers created from the old routers,   #!!#
1010 #!!# for handling non-local domains.                     #!!#
1011 #!!#######################################################!!#
1012
1013 begin routers
1014
1015
1016
1017 ######################################################################
1018 #                      ROUTERS CONFIGURATION                         #
1019 #                Specifies how addresses are handled                 #
1020 ######################################################################
1021 #                          ORDER DOES MATTER                         #
1022 #     An address is passed to each in turn until it is accepted.     #
1023 ######################################################################
1024
1025 <%- if nodeinfo['mailrelay'] -%>
1026 relay_manualroute:
1027   driver = manualroute
1028   domains = +mailhubdomains
1029   transport = remote_smtp
1030   route_data = ${lookup{$domain}lsearch{/etc/exim4/manualroute}}
1031   require_files = /etc/exim4/manualroute
1032
1033 <%- end -%>
1034 bsmtp:
1035   debug_print = "R: bsmtp for $local_part@$domain"
1036   driver = manualroute
1037   domains = +bsmtp_domains
1038   require_files = /etc/exim4/bsmtp
1039   route_list = * ${extract{file}{\
1040                    ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1041                      {$value}fail}}}
1042   transport = bsmtp
1043
1044 # This router routes to remote hosts over SMTP by explicit IP address,
1045 # given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
1046 # require this facility, which is why it is enabled by default in Exim.
1047 ipliteral:
1048   debug_print = "R: ipliteral for $local_part@$domain"
1049   driver = ipliteral
1050   domains = !+handled_domains
1051   transport = remote_smtp
1052   ignore_target_hosts = +reservedaddrs
1053
1054 <%=
1055 out = ""
1056 if not nodeinfo['smarthost'].empty?
1057 out = '
1058 smarthost:
1059   debug_print = "R: smarthost for $local_part@$domain"
1060   driver = manualroute
1061   domains = !+handled_domains
1062   transport = remote_smtp_smarthost
1063   route_list = * ' + nodeinfo['smarthost']
1064   if nodeinfo['smarthost'] == 'mailout.debian.org'
1065     out += '/MX'
1066   end
1067   out += '
1068   host_find_failed = defer
1069   same_domain_copy_routing = yes
1070   no_more
1071 '
1072 end
1073 out
1074 %>
1075
1076 # This router routes to remote hosts over SMTP using a DNS lookup.
1077 # Ignore reserved network responses, including localhost.
1078 dnslookup:
1079   debug_print = "R: dnslookup for $local_part@$domain"
1080   driver = dnslookup
1081   domains = !+handled_domains
1082   transport = remote_smtp
1083   ignore_target_hosts = +reservedaddrs
1084   no_more
1085
1086 postmasterish:
1087   debug_print = "R: postmasterish for $local_part@$domain"
1088   driver = redirect
1089   verify = false
1090   unseen = true
1091   expn = true
1092   local_parts = +postmasterish
1093   domains = +handled_domains
1094   data = debian-admin@debian.org
1095   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1096
1097 # This router handles aliasing using a traditional /etc/aliases file.
1098 # If any of your aliases expand to pipes or files, you will need to set
1099 # up a user and a group for these deliveries to run under. You can do
1100 # this by uncommenting the "user" option below (changing the user name
1101 # as appropriate) and adding a "group" option if necessary.
1102
1103 system_aliases:
1104   debug_print = "R: system_aliases for $local_part@$domain"
1105   driver = redirect
1106   allow_defer
1107   allow_fail
1108   data = ${lookup{$local_part}lsearch*{/etc/aliases}}
1109   domains = +local_domains
1110   file_transport = address_file
1111   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1112   pipe_transport = address_pipe
1113   retry_use_local_part
1114
1115 # This router handles forwarding using traditional .forward files.
1116 # It also allows mail filtering when a forward file starts with the
1117 # string "# Exim filter": to disable filtering, uncomment the "filter"
1118 # option. The check_ancestor option means that if the forward file
1119 # generates an address that is an ancestor of the current one, the
1120 # current one gets passed on instead. This covers the case where A is
1121 # aliased to B and B has a .forward file pointing to A.
1122
1123 # For standard debian setup of one group per user, it is acceptable---normal
1124 # even---for .forward to be group writable. If you have everyone in one
1125 # group, you should comment out the "modemask" line. Without it, the exim
1126 # default of 022 will apply, which is probably what you want.
1127
1128 userforward_verify:
1129   debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1130   driver = redirect
1131   check_ancestor
1132   user = Debian-exim
1133   no_check_local_user
1134   directory_transport = address_directory
1135 <%- if fqdn == "master.debian.org" -%>
1136   domains = +local_domains : debian.org
1137 <%- else -%>
1138   domains = +local_domains
1139 <%- end -%>
1140   # filter - I have disabled filtering to force users to use .forward-foo files
1141   # or procmail. This will make it easier to move mailers in the future
1142   #
1143   # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1144   # also checks if the .forward-bar exists, if not then it uses
1145   # .forward-default instead.
1146   file = $home/.forward\
1147          ${if eq{}{$local_part_suffix}{}{\
1148            ${if exists {${home}/.forward${local_part_suffix}} \
1149              {${local_part_suffix}}{-default}}\
1150            }\
1151           }
1152   file_transport = address_file
1153   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1154   local_part_suffix = -*
1155   local_part_suffix_optional
1156   modemask = 002
1157   pipe_transport = address_pipe
1158   reply_transport = address_reply
1159   require_files = $home
1160   router_home_directory = ${lookup passwd{$local_part}{${extract{5}{:}{$value}}}fail}
1161   verify_only
1162
1163 # This is a senmailesque alias file lookup
1164 virt_aliases:
1165   debug_print = "R: virt_aliases for $local_part@$domain"
1166   driver = redirect
1167   allow_defer
1168   allow_fail
1169   data = ${if exists{\
1170            ${extract{directory}{VDOMAINDATA}{${value}/aliases}}}\
1171            {${lookup{$local_part}lsearch*{\
1172               ${extract{directory}{VDOMAINDATA}{$value/aliases}}\
1173            }}}}
1174   directory_transport = address_directory
1175   domains = +virtual_domains
1176   file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1177   cannot_route_message = Unknown user
1178   group = ${extract{group}{VDOMAINDATA}}
1179   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1180   pipe_transport = address_pipe
1181   qualify_preserve_domain
1182   retry_use_local_part
1183   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1184   transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1185   user = ${extract{user}{VDOMAINDATA}}
1186
1187 userforward:
1188   debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1189   driver = redirect
1190   check_ancestor
1191   check_local_user
1192   directory_transport = address_directory
1193 <%- if fqdn == "master.debian.org" -%>
1194   domains = +local_domains : debian.org
1195 <%- else -%>
1196   domains = +local_domains
1197 <%- end -%>
1198   # filter - I have disabled filtering to force users to use .forward-foo files
1199   # or procmail. This will make it easier to move mailers in the future
1200   #
1201   # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1202   # also checks if the .forward-bar exists, if not then it uses
1203   # .forward-default instead.
1204   file = $home/.forward\
1205          ${if eq{}{$local_part_suffix}{}{\
1206            ${if exists {${home}/.forward${local_part_suffix}} \
1207              {${local_part_suffix}}{-default}}\
1208            }\
1209           }
1210   file_transport = address_file
1211   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1212   local_part_suffix = -*
1213   local_part_suffix_optional
1214   modemask = 002
1215   pipe_transport = address_pipe
1216   reply_transport = address_reply
1217   require_files = $home
1218   no_verify
1219
1220 # This delivers to procmail
1221 procmail:
1222   debug_print = "R: procmail for $local_part@$domain"
1223   driver = accept
1224   check_local_user
1225 <%- if fqdn == "master.debian.org" -%>
1226   domains = +local_domains : debian.org
1227 <%- else -%>
1228   domains = +local_domains
1229 <%- end -%>
1230   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1231   local_part_suffix = -*
1232   local_part_suffix_optional
1233   no_verify
1234   no_expn
1235   require_files = $local_part:$home/.procmailrc
1236   transport = procmail_pipe
1237   transport_current_directory = $home
1238
1239 # This driver delivers to the LDAP generated alias file.
1240 ldap_aliases:
1241   debug_print = "R: ldap_aliases for $local_part@$domain"
1242   driver = redirect
1243   allow_defer
1244   allow_fail
1245   data = ${if exists{/var/lib/misc/$primary_hostname/user-forward.cdb}\
1246              {${lookup{$local_part}cdb\
1247                {/var/lib/misc/$primary_hostname/user-forward.cdb}}}}
1248   domains = +local_domains
1249   file_transport = address_file
1250   local_part_suffix = -*
1251   local_part_suffix_optional
1252   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1253   pipe_transport = address_pipe
1254   retry_use_local_part
1255
1256 # This director matches local user mailboxes.
1257 localuser:
1258   debug_print = "R: localuser for $local_part@$domain"
1259   driver = accept
1260   check_local_user
1261   domains = +local_domains
1262   local_part_suffix = -*
1263   local_part_suffix_optional
1264   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1265   # Disable if the user has never logged in
1266   require_files = $home
1267   transport = local_delivery
1268   no_more
1269
1270 # Now we begin the Virtual Domain configuration
1271 # Everything before here should apply only to the local domains with a
1272 # domains= rule
1273
1274 <%- if nodeinfo['packagesmaster'] -%>
1275 # This router delivers for packages.d.o
1276 packages:
1277   debug_print = "R: packages for $local_part@$domain"
1278   driver = redirect
1279   file_transport = address_file
1280   pipe_transport = address_pipe
1281   domains = packages.debian.org
1282   require_files = /org/packages.debian.org/conf/maintainer
1283   data = ${lookup{$local_part}cdb{/org/packages.debian.org/conf/maintainer.cdb}}
1284   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1285   transport_home_directory = /org/packages.debian.org/mail
1286   transport_current_directory = /org/packages.debian.org/mail
1287   check_ancestor
1288   retry_use_local_part
1289   no_more
1290
1291 <%- end -%>
1292 <%- if nodeinfo['rtmaster'] -%>
1293 # This router delivers for rt.d.o
1294 rt_force_new_verbose:
1295   debug_print = "R: rt for $local_part+new@$domain"
1296   driver = redirect
1297   domains = rt.debian.org
1298   require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1299   local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1300   local_part_suffix = +new
1301   pipe_transport = rt_pipe
1302   data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1303   headers_remove = Subject
1304   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)debian rt\\s*(.*)}}} {$1$2}{$h_subject:}}"
1305
1306 # FIXME: figure out how to generalize this approach so that all of the following would work
1307 # - rt+NNNN@rt.debian.org          : attach correspondence to ticket (verbose)
1308 # - rt+NNNN-quiesce@rt.debian.org  : attach correspondence to ticket (quiesce)
1309 # - rt+NNNN-<action>@rt.debian.org : attach correspondence to ticket (some action)
1310 # requires modification to custom condition in 'scrips'
1311 rt_force_new_quiesce:
1312   debug_print = "R: rt for $local_part+new-quiesce@$domain"
1313   driver = redirect
1314   domains = rt.debian.org
1315   require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1316   local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1317   local_part_suffix = +new-quiesce
1318   pipe_transport = rt_pipe
1319   data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1320   headers_remove = Subject
1321   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nX-RT-Mode: quiesce\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)debian rt\\s*(.*)}}} {$1$2}{$h_subject:}}"
1322
1323 rt_otherwise:
1324   debug_print = "R: rt for $local_part@$domain"
1325   driver = redirect
1326   domains = rt.debian.org
1327   require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1328   local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1329   local_part_suffix = +*
1330   local_part_suffix_optional
1331   pipe_transport = rt_pipe
1332   data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --extension ticket --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1333   headers_remove = Subject
1334   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)debian rt\\s*(.*)}}} {$1$2}{$h_subject:}}"
1335
1336 <%- end -%>
1337
1338 # exim4 fails the router if it can't change to the user/group for delivery
1339 # during verification.  So we have to seperate the cases of verifying
1340 # the virts, and delivering to them.  blah.
1341
1342 virt_direct_verify:
1343   debug_print = "R: virt_direct for $local_part@$domain"
1344   driver = redirect
1345   no_check_local_user
1346   user = Debian-exim
1347   allow_filter
1348   modemask = 002
1349   directory_transport = address_directory
1350   domains = +virtual_domains
1351   local_part_suffix = -*
1352   local_part_suffix_optional
1353   file = $home/.forward-\
1354               ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1355                    {default}}
1356   file_transport = address_file
1357   pipe_transport = address_pipe
1358   reply_transport = address_reply
1359   retry_use_local_part
1360   router_home_directory = ${extract{directory}{VDOMAINDATA}}
1361   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1362   verify_only
1363
1364 # This is a qmailesque deliver into a directory of .forward files
1365 virt_direct:
1366   debug_print = "R: virt_direct for $local_part@$domain"
1367   driver = redirect
1368   allow_filter
1369   allow_fail
1370   allow_defer
1371   no_check_local_user
1372   directory_transport = address_directory
1373   domains = +virtual_domains
1374   file = $home/.forward-\
1375               ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1376                    {default}}
1377   file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1378   group = ${extract{group}{VDOMAINDATA}}
1379   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1380   modemask = 002
1381   local_part_suffix = -*
1382   local_part_suffix_optional
1383   pipe_transport = address_pipe
1384   reply_transport = address_reply
1385   retry_use_local_part
1386   router_home_directory = ${extract{directory}{VDOMAINDATA}}
1387   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1388   no_verify
1389   user = ${extract{user}{VDOMAINDATA}}
1390   #debug_print = .forward-${if exists {${home}/.forward-${local_part}} {${local_part}} {default}}
1391
1392 # This router delivers to the LDAP generated mail-forward file.
1393 # It's only really useful for debian.org
1394 virt_users:
1395   debug_print = "R: virt_users for $local_part@$domain"
1396   driver = redirect
1397   allow_defer
1398   allow_fail
1399   router_home_directory = ${extract{directory}{VDOMAINDATA}}
1400   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1401   user = ${extract{user}{VDOMAINDATA}}
1402   group = ${extract{group}{VDOMAINDATA}}
1403   data = ${if exists{${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}\
1404              {${lookup{$local_part}cdb\
1405              {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}
1406   domains = +virtual_domains
1407   file_transport = address_file
1408   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1409   pipe_transport = address_pipe
1410   local_part_suffix = -*
1411   local_part_suffix_optional
1412   retry_use_local_part
1413
1414 <%=
1415 out = ""
1416 if nodeinfo['bugsmaster'] or nodeinfo['bugsmx']
1417   domain = 'bugs.debian.org'
1418   if nodeinfo['bugsmaster']
1419     domain = 'bugs-master.debian.org'
1420   end
1421   out = '
1422 # This router delivers for bugs.d.o
1423 bugs:
1424   debug_print = "R: bugs for $local_part@$domain"
1425   driver = accept
1426   transport = bugs_pipe
1427   domains = ' + domain + '
1428   cannot_route_message = Unknown or archived bug
1429   require_files = /org/bugs.debian.org/mail/run-procmail
1430   no_more
1431   local_parts = ${if match\
1432                   {$local_part}\
1433                   {\N^(\d+)(\d{2})(?:-(?:(?:submit|maintonly|quiet|forwarded|done|close|request|submitter)|(?:unsubscribe|ignore|help|(?:sub(?:scribe|help|yes|approve|reject))|unsubyes|bounce|probe|approve|reject|setlistyes|setlistsilentyes).*))?$\N}\
1434                {${if exists{/org/bugs.debian.org/spool/db-h/$2/$1$2.summary}\
1435                {$local_part}fail}}fail}
1436 '
1437 end
1438 out
1439 %>
1440 ######################################################################
1441 #                      TRANSPORTS CONFIGURATION                      #
1442 ######################################################################
1443 #                       ORDER DOES NOT MATTER                        #
1444 #     Only one appropriate transport is called for each delivery.    #
1445 ######################################################################
1446
1447
1448 begin transports
1449
1450 # This transport is used for local delivery to user mailboxes. On debian
1451 # systems group mail is used so we can write to the /var/mail
1452 # directory. (The alternative, which most other unixes use, is to deliver
1453 # as the user's own group, into a sticky-bitted directory)
1454 local_delivery:
1455   driver = appendfile
1456   file = /var/mail/${local_part}
1457   group = mail
1458   mode = 0660
1459   no_mode_fail_narrower
1460   return_path_add
1461
1462 # This transport is used for handling pipe addresses generated by alias
1463 # or .forward files. It has a conventional name, since it is not actually
1464 # mentioned elsewhere in this configuration file. (A different name *can*
1465 # be specified via the "address_pipe_transport" option if you really want
1466 # to.) If the pipe generates any standard output, it is returned to the sender
1467 # of the message as a delivery error. Set return_fail_output instead if you
1468 # want this to happen only when the pipe fails to complete normally.
1469
1470 address_pipe:
1471   driver = pipe
1472   current_directory = ${home}
1473   environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1474                  EXT=${substr_1:${local_part_suffix}}:\
1475                  LOCAL=${local_part}${local_part_suffix}:\
1476                  RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1477   return_output
1478   return_path_add
1479
1480 # This transport is used for handling file addresses generated by alias
1481 # or .forward files. It has a conventional name, since it is not actually
1482 # mentioned elsewhere in this configuration file.
1483
1484 address_file:
1485   driver = appendfile
1486   return_path_add
1487
1488 address_file_group:
1489   driver = appendfile
1490   return_path_add
1491   mode = 0660
1492   directory_mode = 0770
1493   mode_fail_narrower = false
1494
1495 # This transport is used for handling file addresses generated by alias
1496 # or .forward files if the path ends in "/", which causes it to be treated
1497 # as a directory name rather than a file name. Each message is then delivered
1498 # to a unique file in the directory. If instead you want all such deliveries to
1499 # be in the "maildir" format that is used by some other mail software,
1500 # uncomment the final option below. If this is done, the directory specified
1501 # in the .forward or alias file is the base maildir directory.
1502 #
1503 # Should you want to be able to specify either maildir or non-maildir
1504 # directory-style deliveries, then you must set up yet another transport,
1505 # called address_directory2. This is used if the path ends in "//" so should
1506 # be the one used for maildir, as the double slash suggests another level
1507 # of directory. In the absence of address_directory2, paths ending in //
1508 # are passed to address_directory.
1509
1510 address_directory:
1511   driver = appendfile
1512   check_string =
1513   maildir_format
1514   message_prefix = ""
1515   message_suffix = ""
1516   return_path_add
1517
1518 # This transport is used for handling autoreplies generated by the filtering
1519 # option of the forwardfile director. It has a conventional name, since it
1520 # is not actually mentioned elsewhere in this configuration file.
1521 address_reply:
1522   driver = autoreply
1523
1524 # This transport is used for delivering messages over SMTP connections.
1525
1526 remote_smtp:
1527   driver = smtp
1528   connect_timeout = 1m
1529   delay_after_cutoff = false
1530 <%- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true" -%>
1531   tls_certificate = /etc/exim4/ssl/thishost.crt
1532   tls_privatekey = /etc/exim4/ssl/thishost.key
1533 <%- end -%>
1534
1535 <%=
1536 out = ""
1537 if not nodeinfo['smarthost'].empty?
1538 out = '
1539 remote_smtp_smarthost:
1540   debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
1541   driver = smtp
1542   delay_after_cutoff = false
1543   port = '
1544   out += nodeinfo['smarthost_port'].to_s + "\n"
1545   if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true"
1546     out += '  tls_tempfail_tryclear = false
1547   hosts_require_tls = ' + nodeinfo['smarthost'] + '
1548   tls_certificate = /etc/exim4/ssl/thishost.crt
1549   tls_privatekey = /etc/exim4/ssl/thishost.key
1550 '
1551   end
1552 end
1553 out
1554 %>
1555 # Send the message to procmail
1556 procmail_pipe:
1557   driver = pipe
1558   command = /usr/bin/procmail -a ${substr_1:${local_part_suffix}}
1559   return_path_add
1560   user = ${local_part}
1561
1562 bsmtp:
1563   driver = appendfile
1564   batch_max = 100
1565   file = ${host}
1566   message_prefix =
1567   message_suffix =
1568   use_bsmtp
1569   user = ${extract{user}{\
1570                    ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1571                      {$value}fail}\
1572                    }}
1573
1574 <%- if nodeinfo['bugsmaster'] or nodeinfo['bugsmx'] -%>
1575 bugs_pipe:
1576   driver = pipe
1577   command = /org/bugs.debian.org/mail/run-procmail
1578   environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1579                  EXT=${substr_1:${local_part_suffix}}:\
1580                  LOCAL=${local_part}${local_part_suffix}:\
1581                  RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1582   return_path_add
1583   return_output
1584   user = debbugs
1585
1586 <%- end -%>
1587 <%- if nodeinfo['rtmaster'] -%>
1588 rt_pipe:
1589   debug_print = "T: rt_pipe for $local_part${local_part_suffix}@$domain"
1590   driver = pipe
1591   return_fail_output
1592   environment = EXTENSION=${substr_1:${local_part_suffix}}
1593   allow_commands = /usr/bin/rt-mailgate
1594
1595 <%- end -%>
1596
1597 ######################################################################
1598 #                      RETRY CONFIGURATION                           #
1599 ######################################################################
1600
1601 # This single retry rule applies to all domains and all errors. It specifies
1602 # retries every 15 minutes for 2 hours, then increasing retry intervals,
1603 # starting at 2 hours and increasing each time by a factor of 1.5, up to 16
1604 # hours, then retries every 8 hours until 4 days have passed since the first
1605 # failed delivery.
1606
1607 # Domain               Error       Retries
1608 # ------               -----       -------
1609
1610
1611 begin retry
1612
1613 debian.org             *           F,2h,10m; G,16h,2h,1.5; F,14d,8h
1614 *                      * senders=: F,2h,10m
1615 *                      rcpt_4xx    F,2h,5m;  F,4h,10m; F,4d,15m
1616 *                      *           F,2h,15m; G,16h,2h,1.5; F,4d,8h
1617
1618 # End of Exim 4 configuration