+++ /dev/null
-# This is the N1KV VEM configuration file.
-# <n1kv.conf> file contains all the configuration parameters for VEM operation.
-# Please find below a brief explanation of these parameters and their meaning.
-# Optional Parameters and Default Values of parameters are explicitly stated.
-# Note:
-# a)Mandatory parameters are needed for proper VEM operation.
-# N1KV DP/DPA should start even if these are not specified.
-# But there will be functional impact. For eg: in VSM connectivity
-# b)For any updates to parameters to take effect, you just need to execute
-# 'vemcmd reread config'. Its the least-disruptive way for changes to
-# take effect. However for certain params, n1kv service need to be restarted.
-# These parameter are stated explictly (restart_on_modify: YES).
-#
-
-#
-#<vsm-connection-params>
-#
-# TAG: switch-domain
-# Description:
-# Optional: No
-# Default: 1000
-# restart_on_modify: No
-switch-domain <%= @n1kv_vsm_domain_id %>
-
-# TAG: l3control-ipaddr
-# Description: IP Address of VSM Mgmt I/F
-# Optional: No
-# Default: 127.0.0.1
-# restart_on_modify: No
-l3control-ipaddr <%= @n1kv_vsm_ip %>
-
-# TAG: host-mgmt-intf
-# Description: Management interface of the Host
-# Optional: No (on N1KV, we need this
-# for Host Identification on VSM).
-# Default: lo
-# restart_on_modify: Yes
-host-mgmt-intf <%= @host_mgmt_intf %>
-
-#<Port-Profile Mapping>
-# Description: Port-Profile mapping for all VEM managed Interfaces.
-# Optional: Yes
-# restart_on_modify: No
-#
-# Note: Do not specify Host Management Interface here.
-# We do yet support System Ports (Ports which need to be up all time: Post Reboot/VEM Upgrade).
-#
-# Format for physical ports:
-# phys <port-name> profile <profile-name>
-#phys eth1 profile sys-uplink
-#phys eth2 profile uplink2
-
-<% @uplink_profile.each do |port, profile| -%>
-phys <%= port%> profile <%= profile%>
-<% end -%>
-
-# Format for non-vm virt ports. For instance: VTEP ports.
-# virt <port-name> profile <profile-name> [mode static|dhcp] [address <ipaddr>]
-# [netmask <netmask ip>] [mac <macaddr>]
-# [] -->indicates optional parameters.
-#Eg:
-#virt vtep3 profile profint mode dhcp
-#virt vtep1 profile profint mode dhcp mac 00:11:22:33:44:55
-#virt vtep2 profile profint mode static address 192.168.2.91 netmask 255.255.255.0
-#virt vtep2 profile profint mode static address 192.168.2.91 netmask 255.255.255.0 mac 00:22:22:33:44:55
-
-<% @vtep_config.each do |port, params| -%>
-<% if params['ipmode'] == 'dhcp' -%>
-virt <%= port%> profile <%= params['profile']%> mode dhcp
-<% else-%>
-virt <%= port%> profile <%= params['profile']%> mode static address <%= params['ipaddress']%> netmask <%= params['netmask']%>
-<% end -%>
-<% end -%>
-
-# TAG: uvem-ovs-brname
-# Description: Default Open VSwitch Bridge Name
-# Optional: YES.
-# Default: n1kvdvs
-# restart_on_modify: Yes
-# Format:
-# uvem-ovs-brname n1kvdvs
-uvem-ovs-brname br-int
-
-# TAG: portdb
-# Description: PortDB (ovs|vem)
-# Optional: YES.
-# Default: ovs
-# restart_on_modify: Yes
-# Format:
-# portdb vem
-portdb <%= @portdb %>
-
-# TAG: node-type
-# Description: Type of Node: 'compute' (or) 'neutron'
-# Optional: YES.
-# Default: compute
-# restart_on_modify: No
-# Format:
-# node-type compute
-node-type <%= @node_type %>
-
-# The below parameters are not commonly modified.
-#
-#
-#<system-port-profile-Info>
-# Description: System Port Profiles.
-# Optional: Yes (If there are no System Interfaces: Mgmt I/F etc)
-# restart_on_modify: No
-#
-#Trunk Profile Format
-#profile <name> trunk <vlan>
-#profile <name> native-vlan <vlan>
-#profile <name> mtu <mtu-size>
-#
-#Access Profile
-#profile <name> access <vlan>
-#profile <name> mtu <mtu-size>
-
-# TAG: dp-np-threads
-# Description: Number of datapath threads to process normal priority packets
-# Optional: YES
-# Default: 4
-# restart_on_modify: Yes
-# Format: dp-np-threads <1..32>
-
-# TAG: dp-lp-threads
-# Description: Number of datapath threads to process low priority packets
-# Optional: YES
-# Default: 1
-# restart_on_modify: Yes
-# Format: dp-lp-threads <1..32>
-
-# TAG: dp-hp-threads
-# Description: Number of datapath threads to process high priority packets
-# Optional: YES
-# Default: 1
-# restart_on_modify: Yes
-# Format: dp-hp-threads <1..32>
-
-# TAG: dp-thread-sockets
-# Description: Number of packet sockets each datapath thread creates
-# Optional: YES
-# Default: 1
-# restart_on_modify: Yes
-# Format: dp-thread-sockets <1..16>
-
-# TAG: dp-thread-socket-rbuflen
-# Description: Receive buffer length of each packet socket
-# Optional: YES
-# Default: 8 MBytes
-# restart_on_modify: Yes
-# Format: dp-thread-socket-rbuflen <0..255>
-# Note: 0 - use system default
-
-# TAG: dp-thread-socket-rrnglen
-# Description: Rx-ring length of each packet socket
-# Optional: YES
-# Default: 4096
-# restart_on_modify: Yes
-# Format: dp-thread-socket-rrnglen <0..16384>
-# Note: 0 - disables memory map I/O
-
-# TAG: fastpath-flood
-# Description: Enable flood of broadcast and unknown pkts in KLM
-# Optional: YES
-# Default: disable
-# restart_on_modify: Yes
-# Format: fastpath-flood <enable|disable>
-fastpath-flood <%= @fastpath_flood %>
projects / mirror / dsa-puppet.git / blobdiff