+# DEFAULT DOWNTIME DURATION
+# This option defines the default duration (in seconds) of fixed and
+# flexible downtimes. Default is 7200 seconds (2 hours).
+
+default_downtime_duration=7200
+
+
+
+# DEFAULT EXPIRING ACKNOWLEDGEMENT DURATION
+# This option defines the default duration (in seconds) of a expiring
+# acknowledgement. Default is 86400 seconds (1 day).
+
+default_expiring_acknowledgement_duration=86400
+
+
+
+# SHOW LONG PLUGIN OUTPUT IN STATUS OPTION
+# This option allows you to specify the length of status information
+# in output of status.cgi. If you set the value to 1 it shows the
+# full plugin output instead of the first line only.
+# Default value is 0.
+
+status_show_long_plugin_output=0
+
+
+
+# DISPLAY STATUS TOTAL
+# This option allows you to specify if the
+# Host Status Totals and Service Status Totals
+# should be displayed.
+# Default value is 0.
+
+display_status_totals=0
+
+
+
+# SHOW ONLY HARD STATES IN TAC OPTION
+# This options allows you to specify if the tactical overview
+# should only show hard states on hosts and services.
+# By default disabled, all states will be shown.
+
+tac_show_only_hard_state=0
+
+
+
+# SHOW CHILD HOSTS IN EXTINFO OPTION
+# This Option allows you to specify if the extended host information
+# cgi will show child hosts for the selected host.
+# 0 = disabled
+# 1 = only show immediate child hosts
+# 2 = show immediate and all child hosts
+# NOTE: Option 2 could be a real performance killer in
+# large installations, so use with care.
+# By default disabled, as this could be a performance killer.
+
+extinfo_show_child_hosts=0
+
+
+
+# SUPPRESS MAINTENANCE DOWNTIME
+# This options suppresses the state coloring of hosts and services
+# that are in a scheduled downtime. It sets their coloring to gray,
+# so they no longer draw extra attention to themselves, making it
+# so only actual problems are the ones that stand out.
+# By default it is disabled.
+
+suppress_maintenance_downtime=0
+
+
+# SHOW TAC INFORMATION IN TOP FRAME
+# This options places tactical overview information in
+# the top frame similar to the view that's in icinga-web.
+# By default it is enabled.
+
+show_tac_header=1
+
+
+# SHOW PENDING IN TAC HEADER
+# This options enables the display of pending counts in
+# the tac header. If your display is less than 1024x768
+# and this is enabled, the tactical information may not
+# fit well in the top frame.
+# By default it is enabled.
+
+show_tac_header_pending=1
+
+
+
+# SHOW INITIAL STATES IN SHOWLOG OPTION
+# This options allows you to specify if initial states
+# of hosts and services should be shown in showlog.cgi
+# Note: This Option only works if the option
+# "log_initial_states" in icinga.cfg is set to 1.
+# By default it's enabled. Default is 0.
+
+#showlog_initial_states=0
+
+
+
+# SHOW CURRENT STATES IN SHOWLOG OPTION
+# This options allows you to specify if current states
+# of hosts and services should be shown in showlog.cgi
+# Note: This Option only works if the option
+# "log_current_states" in icinga.cfg is set to 1.
+# By default it's enabled. Default is 0.
+
+#showlog_current_states=0
+
+
+
+# DEFAULT NUM DISPLAYED LOG ENTRIES OPTION
+# This options specifies the number of log entries
+# displayed by default in showlog.cgi. To display
+# all log entries by default set this value to 0.
+# Default is 10000.
+
+#default_num_displayed_log_entries=10000
+
+
+
+# CSV DELIMITER
+# This option determines the character which should act as
+# delimiter. Default is ";".
+
+#csv_delimiter=;
+
+
+
+# CSV DATA ENCLOSURE
+# This option determines the character which should act as
+# data enclosure to wrap in the data. Default is "'".
+
+#csv_data_enclosure='
+
+
+
+# TAB-FRIENDLY <TITLE>S
+# Activating this option changes the <title> of status.cgi
+# and extinfo.cgi when they refer to a single host, service,
+# or group. They will then read:
+# [Host]
+# {HostGroup}
+# ServiceDesc @ Host
+# (ServiceGroup)
+# These are easier to read and find if you use (many) tabs
+# in your browser.
+# Default is enabled. 0=disabled, 1=enabled
+
+tab_friendly_titles=1
+
+
+# SERVICE STATES TO ANNOTATE WITH CURRENT NOTIFICATION NO.
+# Set this to an OR of the service state identifiers for
+# which status.cgi should not only report "Attempts" (e.g.,
+# "3/3" for a HARD non-OK state with max_check_attempts=3)
+# but also the current notification number ("(#0)" if no
+# problem notification has been sent yet, etc.). This is
+# helpful to identify services which switched between
+# different non-OK states a lot, or services which have a
+# first_notification_delay set and are "not yet officially"
+# considered in trouble.
+# Relevant values from include/statusdata.h (look them up
+# *there* if you want to be *really* sure):
+# #define SERVICE_PENDING 1
+# #define SERVICE_OK 2
+# #define SERVICE_WARNING 4
+# #define SERVICE_UNKNOWN 8
+# #define SERVICE_CRITICAL 16
+# You'll likely want to use add_notif_num_hard=0 (default)
+# or add_notif_num_hard=28 (warn+crit+unknown). There's an
+# add_notif_num_soft affecting services in a SOFT state
+# for sake of completeness, too.
+
+#add_notif_num_hard=28
+#add_notif_num_soft=0
+
+