2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
6 #####################################################################
8 # Configuration file template for samhain.
10 #####################################################################
12 # -- empty lines and lines starting with '#', ';' or '//' are ignored
13 # -- boolean options can be Yes/No or True/False or 1/0
14 # -- you can PGP clearsign this file -- samhain will check (if compiled
15 # with support) or otherwise ignore the signature
16 # -- CHECK mail address
18 # To each log facility, you can assign a threshold severity. Only
19 # reports with at least the threshold severity will be logged
20 # to the respective facility (even further below).
22 #####################################################################
24 # SETUP for file system checking:
26 # (i) There are several policies, each has its own section. Put files
27 # into the section for the appropriate policy (see below).
28 # (ii) Section [EventSeverity]:
29 # To each policy, you can assign a severity (further below).
30 # (iii) Section [Log]:
31 # To each log facility, you can assign a threshold severity. Only
32 # reports with at least the threshold severity will be logged
33 # to the respective facility (even further below).
35 #####################################################################
37 #####################################################################
39 # Files are defined with: file = /absolute/path
41 # Directories are defined with: dir = /absolute/path
42 # or with an optional recursion depth (N <= 99): dir = N/absolute/path
44 # Directory inodes are checked. If you only want to check files
45 # in a directory, but not the directory inode itself, use (e.g.):
48 # dir = /some/directory
50 # file = /some/directory
52 # You can use shell-style globbing patterns, like: file = /path/foo*
54 ######################################################################
58 ## Add or subtract tests from the policies
59 ## - if you want to change their definitions,
60 ## you need to do that before using the policies
62 # RedefReadOnly = (no default)
63 # RedefAttributes=(no default)
64 # RedefLogFiles=(no default)
65 # RedefGrowingLogFiles=(no default)
66 # RedefIgnoreAll=(no default)
67 # RedefIgnoreNone=(no default)
68 # RedefUser0=(no default)
69 # RedefUser1=(no default)
73 ## for these files, only changes in permissions and ownership are checked
76 file=/etc/ssh_random_seed
81 file=/etc/passwd.backup
82 file=/etc/shadow.backup
83 file=/etc/postfix/prng_exch
87 file=/etc/lvm/cache/.cache
88 file=/etc/network/run/ifstate
89 file=/var/state/samhain/samhain_file
90 file=/etc/bind/zones/db.debian.net
96 # There are files in /etc that might change, thus changing the directory
97 # timestamps. Put it here as 'file', and in the ReadOnly section as 'dir'.
101 file=/etc/network/run
104 # These are the directories for the files we handle with puppet
110 file=/etc/apt/apt.conf.d
111 file=/etc/apt/sources.list.d
113 file=/etc/logrotate.d
115 file=/etc/nagios/nrpe.d
118 when "spohr.debian.org": extradir="file=/etc/nagios3/puppetconf.d
120 else extradir="file=/etc/puppet"
125 file=/usr/lib/nagios/plugins
128 file=/etc/monit/monit.d
134 ## for these files, changes in signature, timestamps, and size are ignored
141 #####################################################################
143 # This would be the proper syntax for parts that should only be
144 # included for certain hosts.
145 # You may enclose anything in a @HOSTNAME/@end bracket, as long as the
146 # result still has the proper syntax for the config file.
147 # You may have any number of @HOSTNAME/@end brackets.
148 # HOSTNAME should be the fully qualified 'official' name
149 # (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
150 # No IP number - except if samhain cannot determine the
151 # fully qualified hostname.
157 # These are two examples for conditional inclusion/exclusion
158 # of a machine based on the output from 'uname -srm'
168 #####################################################################
172 ## for these files, changes in signature, timestamps, and increase in size
176 file=/var/log/messages
178 file=/var/log/faillog
179 file=/var/log/auth.log
180 file=/var/log/daemon.log
181 file=/var/log/user.log
182 file=/var/log/kern.log
188 ## for these files, no modifications are reported
190 ## This file might be created or removed by the system sometimes.
192 file=/etc/resolv.conf.pcmcia.save
194 file=/etc/postfix/debian.db
195 file=/etc/postfix/debian
196 file=/etc/ssh/ssh_known_hosts
197 file=/etc/ssh/ssh-rsa-shadow
198 file=/var/lib/misc/ssh-rsa-shadow
199 file=/etc/.da-backup.trace
200 file=/etc/postfix/debianhosts
201 file=/etc/postfix/debianhosts.db
203 # We handle these files with puppet - please to not be bothering us
206 file=/etc/samhain/samhainrc
207 file=/etc/munin/munin-node.conf
208 file=/etc/userdir-ldap.confc
209 file=/etc/exim4/blacklist
210 file=/etc/exim4/callout_users
211 file=/etc/exim4/exim4.conf
212 file=/etc/exim4/grey_users
213 file=/etc/exim4/helo-check
214 file=/etc/exim4/locals
215 file=/etc/exim4/localusers
216 file=/etc/exim4/manualroute
217 file=/etc/exim4/rbllist
218 file=/etc/exim4/rcpthosts
219 file=/etc/exim4/rhsbllist
220 file=/etc/exim4/virtualdomains
221 file=/etc/exim4/whitelist
222 file=/etc/exim4/local-auto.conf
223 file=/etc/exim4/local-settings.conf
224 file=/etc/exim4/ssl/ca.crt
225 file=/etc/exim4/ssl/ca.crl
226 file=/etc/exim4/ssl/thishost.crt
227 file=/etc/exim4/ssl/thishost.key
228 file=/etc/apt/preferences
229 file=/etc/apt/sources.list.d/volatile.list
230 file=/etc/apt/sources.list.d/security.list
231 file=/etc/apt/sources.list.d/buildd.list
232 file=/etc/apt/sources.list.d/debian.org.list
233 file=/etc/apt/sources.list.d/debian.restricted.list
234 file=/etc/apt/sources.list.d/debian.list
235 file=/etc/apt/sources.list.d/backports.org.list
236 file=/etc/apt/apt.conf.d/local-recommends
237 file=/etc/apt/apt.conf.d/local-pdiffs
238 file=/etc/puppet/puppet.conf
239 file=/etc/default/puppet
240 file=/etc/logrotate.d/exim4-paniclog
241 file=/etc/logrotate.d/exim4-base
242 file=/usr/sbin/dsa-update-apt-status
243 file=/usr/sbin/dsa-update-samhain-status
244 file=/etc/nagios/nrpe.d/nrpe_dsa.cfg
245 file=/etc/nagios/nrpe.d/debianorg.cfg
246 file=/etc/nagios/obsolete-packages-ignore
247 file=/usr/lib/nagios/plugins/dsa-check-packages
248 file=/usr/lib/nagios/plugins/dsa-check-soas
249 file=/usr/lib/nagios/plugins/dsa-check-mirrorsync
250 file=/usr/lib/nagios/plugins/dsa-check-samhain
251 file=/usr/lib/nagios/plugins/dsa-check-statusfile
252 file=/usr/lib/nagios/plugins/dsa-check-dabackup-server
253 file=/usr/lib/nagios/plugins/dsa-check-config
254 file=/usr/lib/nagios/plugins/dsa-check-hpacucli
255 file=/usr/lib/nagios/plugins/dsa-check-raid-mpt
256 file=/usr/lib/nagios/plugins/dsa-check-puppet
257 file=/usr/lib/nagios/plugins/dsa-check-running-kernel
258 file=/usr/lib/nagios/plugins/dsa-check-raid-3ware
259 file=/usr/lib/nagios/plugins/dsa-check-dabackup
260 file=/usr/lib/nagios/plugins/dsa-check-raid-dac960
261 file=/usr/lib/nagios/plugins/dsa-check-udldap-freshness
262 file=/usr/lib/nagios/plugins/dsa-check-raid-areca
263 file=/usr/lib/nagios/plugins/dsa-check-raid-sw
264 file=/usr/lib/nagios/plugins/dsa-update-samhain-status
268 file=/etc/blkid.tab.old
269 file=/etc/monit/monitrc
270 file=/etc/monit/monit.d/01puppet
271 file=/etc/monit/monit.d/00debian.org
272 file=/etc/resolv.conf.dhclient-new
275 when "spohr.debian.org": extrafiles="file=/etc/nagios3/puppetconf.d/auto-hostgroups.cfg
276 file=/etc/nagios3/puppetconf.d/auto-hosts.cfg
277 file=/etc/nagios3/puppetconf.d/auto-services.cfg
278 file=/etc/nagios3/puppetconf.d/auto-dependencies.cfg
279 file=/etc/nagios3/puppetconf.d/auto-hostextinfo.cfg
280 file=/etc/nagios3/puppetconf.d/auto-serviceextinfo.cfg"
281 when "handel.debian.org": extrafiles="dir=8/etc/puppet"
288 ## for these files, all modifications (even access time) are reported
289 ## - you may create some interesting-looking file (like /etc/safe_passwd),
290 ## just to watch whether someone will access it ...
295 ## Use for prelinked files or directories holding them
301 ## for these files, only access time is ignored
307 # SuSE (old) has the boot init scripts in /sbin/init.d/*,
308 # so we go 3 levels deep
315 # RedHat and Debian have the bootinit scripts in /etc/init.d/* or /etc/rc.d/*,
316 # so we go 3 levels deep there too
320 # Various directories / files that may include / be SUID/SGID binaries
323 file=/usr/lib/pt_chown
324 # X11, in Debian X7 this is now a symlink
326 #dir=/usr/X11R6/lib/X11/xmcd/bin
328 #file=/usr/lib/apache/suexec
329 #file=/usr/lib/apache/suexec.disabled
336 ## User0 and User1 are sections for files/dirs with user-definable checking
342 ## Here you can assign severities to policy violations.
343 ## If this severity exceeds the treshold of a log facility (see below),
344 ## a policy violation will be logged to that facility.
346 ## Severity for verification failures.
348 # SeverityReadOnly=crit
349 # SeverityLogFiles=crit
350 # SeverityGrowingLogs=crit
351 # SeverityIgnoreNone=crit
352 # SeverityAttributes=crit
357 SeverityReadOnly=crit
358 SeverityLogFiles=crit
359 SeverityGrowingLogs=warn
360 SeverityIgnoreNone=crit
361 SeverityAttributes=crit
365 ## We have a file in IgnoreAll that might or might not be present.
366 ## Setting the severity to 'info' prevents messages about deleted/new file.
368 # SeverityIgnoreAll=crit
369 SeverityIgnoreAll=info
371 ## Files : file access problems
374 ## Dirs : directory access problems
377 ## Names : suspect (non-printable) characters in a pathname
388 ## Switch on/OFF log facilities and set their threshold severity
390 ## Values: debug, info, notice, warn, mark, err, crit, alert, none.
391 ## 'mark' is used for timestamps.
394 ## Use 'none' to SWITCH OFF a log facility
396 ## By default, everything equal to and above the threshold is logged.
397 ## The specifiers '*', '!', and '=' are interpreted as
398 ## 'all', 'all but', and 'only', respectively (like syslogd(8) does,
399 ## at least on Linux). Examples:
401 ## MailSeverity=!warn
402 ## MailSeverity==crit
418 # SyslogSeverity=none
420 ## Remote server (yule)
422 # ExportSeverity=none
424 ## External script or program
426 # ExternalSeverity = none
428 ## Logging to a database
430 # DatabaseSeverity = none
443 #####################################################
447 #####################################################
451 ## --- Check the filesystem for SUID/SGID binaries
456 # SuidCheckActive = yes
458 ## Interval for check (seconds)
460 # SuidCheckInterval = 7200
462 ## Alternative: crontab-like schedule
464 # SuidCheckSchedule = NULL
466 ## Directory to exclude
468 # SuidCheckExclude = NULL
470 ## Limit on files per second (0 == no limit)
474 ## Alternative: yield after every file
476 # SuidCheckYield = no
478 ## Severity of a detection
480 # SeveritySuidCheck = crit
482 ## Quarantine SUID/SGID files if found
484 # SuidCheckQuarantineFiles = yes
486 ## Method for Quarantining files:
487 # 0 - Delete or truncate the file.
488 # 1 - Remove SUID/SGID permissions from file.
489 # 2 - Move SUID/SGID file to quarantine dir.
491 # SuidCheckQuarantineMethod = 0
493 ## For method 1 and 3, really delete instead of truncating
495 # SuidCheckQuarantineDelete = yes
499 ## --- Check for loadable kernel module rootkits (Linux/FreeBSD only)
504 KernelCheckActive = True
506 ## Check interval (seconds); btw., the check is VERY fast
508 # KernelCheckInterval = 300
512 # SeverityKernel = crit
517 ## --- Logging of login/logout events
522 LoginCheckActive = True
524 ## Severity for logins, multiple logins, logouts
527 # SeverityLoginMulti=warn
528 # SeverityLogout=info
530 ## Interval for login/logout checks
532 # LoginCheckInterval = 300
537 ## --- Logging to a relational database
542 # SetDBName = samhain
550 # SetDBUser = samhain
554 # SetDBPassword = (default: none)
558 # SetDBHost = localhost
560 ## Log the server timestamp for received messages
562 # SetDBServerTstamp = True
564 ## Use a persistent connection
566 # UsePersistent = True
570 ## Interface to call external scripts/programs for logging
573 ## The absolute path to the command
574 ## - Each invocation of this directive will end the definition of the
575 ## preceding command, and start the definition of
576 ## an additional, new command
578 # OpenCommand = (no default)
581 ## - log for log messages, srv for messages received by the server
585 ## The command (full command line) to execute
587 # SetCommandLine = (no default)
589 ## The environment (KEY=value; repeat for more)
591 # SetEnviron = TZ=(your timezone)
593 ## The TIGER192 checksum (optional)
595 # SetChecksum = (no default)
597 ## User who runs the command
599 # SetCredentials = (default: samhain process uid)
601 ## Words not allowed in message
603 # SetFilterNot = (none)
605 ## Words required (ALL of them)
607 # SetFilterAnd = (none)
609 ## Words required (at least one)
611 # SetFilterOr = (none)
613 ## Deadtime between consecutive calls
617 ## Add default environment (HOME, PATH, SHELL)
622 #####################################################
624 # Miscellaneous configuration options
626 #####################################################
630 ## whether to become a daemon process
631 ## (this is not honoured on database initialisation)
636 ## whether to test signature of files (init/check/none)
637 ## - if 'none', then we have to decide this on the command line -
639 # ChecksumTest = none
642 ## whether to drop linux capabilities that are not required
643 ## - will make a root process a 'mere mortal' in many respects
647 ## Set nice level (-19 to 19, see 'man nice'),
648 ## and I/O limit (kilobytes per second; 0 == off)
649 ## to reduce load on host.
654 ## The version string to embed in file signature databases
656 # VersionString = NULL
658 ## Interval between time stamp messages
663 ## Interval between file checks
665 # SetFileCheckTime = 600
666 SetFileCheckTime = 7200
668 ## Alternative: crontab-like schedule
670 # FileCheckScheduleOne = NULL
672 ## Alternative: crontab-like schedule(2)
674 # FileCheckScheduleTwo = NULL
676 ## Report only once on modified fles
677 ## Setting this to 'FALSE' will generate a report for any policy
678 ## violation (old and new ones) each time the daemon checks the file system.
680 # ReportOnlyOnce = True
682 ## Report in full detail
684 # ReportFullDetail = False
686 ## Report file timestamps in local time rather than GMT
690 ## The console device (can also be a file or named pipe)
691 ## - There are two console devices. Accordingly, you can use
692 ## this directive a second time to set the second console device.
693 ## If you have not defined the second device at compile time,
694 ## and you don't want to use it, then:
695 ## setting it to /dev/null is less effective than just leaving
696 ## it alone (setting to /dev/null will waste time by opening
697 ## /dev/null and writing to it)
699 # SetConsole = /dev/console
701 ## Activate the SysV IPC message queue
703 # MessageQueueActive = False
706 ## If false, skip reverse lookup when connecting to a host known
707 ## by name rather than IP address (i.e. trust the DNS)
709 # SetReverseLookup = True
713 # Only highest-level (alert) reports will be mailed immediately,
714 # others will be queued. Here you can define, when the queue will
715 # be flushed (Note: the queue is automatically flushed after
716 # completing a file check).
720 ## Maximum number of mails to queue
724 ## Recipient (max. 8)
726 SetMailAddress=samhain-reports@debian.org
728 ## Mail relay (IP address)
731 if not nodeinfo['smarthost'].empty?
733 SetMailRelay = localhost
737 SetMailRelay = master.debian.org
742 ## Custom subject format
744 MailSubject = [Samhain at %H] %T: %S
746 ## --- end E-Mail ---
748 ## Path to the prelink executable
750 # SetPrelinkPath = /usr/sbin/prelink
752 ## TIGER192 checksum of the prelink executable
754 # SetPrelinkChecksum = (no default)
757 ## Path to the executable. If set, will be checksummed after startup
760 # SamhainPath = (no default)
763 ## The IP address of the log server
765 # SetLogServer = (default: compiled-in)
767 ## The IP address of the time server
769 # SetTimeServer = (default: compiled-in)
771 ## Trusted Users (comma delimited list of user names)
773 # TrustedUser = (no default; this adds to the compiled-in list)
775 ## Path to the file signature database
777 # SetDatabasePath = (default: compiled-in)
779 ## Path to the log file
781 # SetLogfilePath = (default: compiled-in)
783 ## Path to the PID file
785 # SetLockPath = (default: compiled-in)
788 ## The digest/checksum/hash algorithm
790 # DigestAlgo = TIGER192
793 ## Custom format for message header.
794 ## CAREFUL if you use XML logfile format.
803 # MessageHeader="%S %T "
806 ## Don't log path to config/database file on startup
810 ## The syslog facility, if you log to syslog
812 # SyslogFacility = LOG_AUTHPRIV
813 SyslogFacility=LOG_LOCAL2
815 ## The message authentication method
816 ## - If you change this, you *must* change it
817 ## on client *and* server
819 # MACType = HMAC-TIGER
822 ## everything below is ignored
825 #####################################################################
826 # This would be the proper syntax for parts that should only be
827 # included for certain hosts.
828 # You may enclose anything in a @HOSTNAME/@end bracket, as long as the
829 # result still has the proper syntax for the config file.
830 # You may have any number of @HOSTNAME/@end brackets.
831 # HOSTNAME should be the fully qualified 'official' name
832 # (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
833 # No IP number - except if samhain cannot determine the
834 # fully qualified hostname.
840 # These are two examples for conditional inclusion/exclusion
841 # of a machine based on the output from 'uname -srm'
850 #####################################################################