2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
6 #####################################################################
8 # Configuration file template for samhain.
10 #####################################################################
12 # -- empty lines and lines starting with '#', ';' or '//' are ignored
13 # -- boolean options can be Yes/No or True/False or 1/0
14 # -- you can PGP clearsign this file -- samhain will check (if compiled
15 # with support) or otherwise ignore the signature
16 # -- CHECK mail address
18 # To each log facility, you can assign a threshold severity. Only
19 # reports with at least the threshold severity will be logged
20 # to the respective facility (even further below).
22 #####################################################################
24 # SETUP for file system checking:
26 # (i) There are several policies, each has its own section. Put files
27 # into the section for the appropriate policy (see below).
28 # (ii) Section [EventSeverity]:
29 # To each policy, you can assign a severity (further below).
30 # (iii) Section [Log]:
31 # To each log facility, you can assign a threshold severity. Only
32 # reports with at least the threshold severity will be logged
33 # to the respective facility (even further below).
35 #####################################################################
37 #####################################################################
39 # Files are defined with: file = /absolute/path
41 # Directories are defined with: dir = /absolute/path
42 # or with an optional recursion depth (N <= 99): dir = N/absolute/path
44 # Directory inodes are checked. If you only want to check files
45 # in a directory, but not the directory inode itself, use (e.g.):
48 # dir = /some/directory
50 # file = /some/directory
52 # You can use shell-style globbing patterns, like: file = /path/foo*
54 ######################################################################
58 ## Add or subtract tests from the policies
59 ## - if you want to change their definitions,
60 ## you need to do that before using the policies
62 # RedefReadOnly = (no default)
63 # RedefAttributes=(no default)
64 # RedefLogFiles=(no default)
65 # RedefGrowingLogFiles=(no default)
66 # RedefIgnoreAll=(no default)
67 # RedefIgnoreNone=(no default)
68 # RedefUser0=(no default)
69 # RedefUser1=(no default)
70 <% if nodeinfo['buildd'] -%>
71 IgnoreMissing=/etc/lvm/archive/.*.vg
76 ## for these files, only changes in permissions and ownership are checked
79 file=/etc/ssh_random_seed
81 <% case hoster when "ubcece", "darmstadt", "ftcollins", "grnet" then -%>
87 file=/etc/passwd.backup
88 file=/etc/shadow.backup
89 file=/etc/postfix/prng_exch
93 file=/etc/lvm/cache/.cache
94 file=/etc/network/run/ifstate
95 file=/var/state/samhain/samhain_file
96 file=/etc/bind/zones/db.debian.net
98 <% if classes.include?("named::geodns") -%>
100 file=/etc/bind/named.conf.acl
101 file=/etc/bind/named.conf.local
102 file=/etc/bind/geodns/named.conf.geo
103 file=/etc/bind/geodns/recvconf.files
105 <% if classes.include?("named") -%>
106 file=/etc/bind/named.conf.options
110 # There are files in /etc that might change, thus changing the directory
111 # timestamps. Put it here as 'file', and in the ReadOnly section as 'dir'.
115 file=/etc/network/run
117 file=/etc/spamassassin/sa-update-keys
119 # These are the directories for the files we handle with puppet
120 file=/etc/apache2/conf.d
121 files=/etc/apache2/mods-enabled
124 file=/etc/munin/plugins
125 file=/etc/munin/plugin-conf.d
129 file=/etc/apt/apt.conf.d
130 file=/etc/apt/sources.list.d
132 file=/etc/logrotate.d
134 file=/etc/nagios/nrpe.d
135 file=/etc/nagios/obsolete-packages-ignore.d
136 file=/etc/bind/geodns
137 <% if nodeinfo['nagiosmaster'] -%>
138 file=/etc/nagios3/puppetconf.d
142 file=/usr/lib/nagios/plugins
145 file=/etc/monit/monit.d
150 file=/etc/ferm/conf.d
153 file=/etc/ssl/debian/crls
154 file=/etc/ssl/debian/certs
155 file=/etc/ssl/debian/keys
160 ## for these files, changes in signature, timestamps, and size are ignored
167 #####################################################################
169 # This would be the proper syntax for parts that should only be
170 # included for certain hosts.
171 # You may enclose anything in a @HOSTNAME/@end bracket, as long as the
172 # result still has the proper syntax for the config file.
173 # You may have any number of @HOSTNAME/@end brackets.
174 # HOSTNAME should be the fully qualified 'official' name
175 # (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
176 # No IP number - except if samhain cannot determine the
177 # fully qualified hostname.
183 # These are two examples for conditional inclusion/exclusion
184 # of a machine based on the output from 'uname -srm'
194 #####################################################################
198 ## for these files, changes in signature, timestamps, and increase in size
202 file=/var/log/messages
204 file=/var/log/faillog
205 file=/var/log/auth.log
206 file=/var/log/daemon.log
207 file=/var/log/user.log
208 file=/var/log/kern.log
214 ## for these files, no modifications are reported
216 ## This file might be created or removed by the system sometimes.
218 <% case hoster when "ubcece", "darmstadt", "ftcollins", "grnet" then -%>
219 file=/etc/resolv.conf
221 file=/etc/resolv.conf.pcmcia.save
223 file=/etc/postfix/debian.db
224 file=/etc/postfix/debian
225 file=/etc/ssh/ssh_known_hosts
226 file=/etc/ssh/ssh-rsa-shadow
227 file=/var/lib/misc/ssh-rsa-shadow
228 file=/etc/.da-backup.trace
229 file=/etc/postfix/debianhosts
230 file=/etc/postfix/debianhosts.db
232 file=/etc/blkid.tab.old
233 file=/etc/resolv.conf.dhclient-new
235 # We handle these files with puppet - please to not be bothering us
239 file=/etc/samhain/samhainrc
240 file=/etc/munin/munin-node.conf
241 file=/etc/munin/plugin-conf.d/munin-node
242 file=/etc/userdir-ldap.confc
243 file=/etc/exim4/blacklist
244 file=/etc/exim4/host_blacklist
245 file=/etc/exim4/callout_users
246 file=/etc/exim4/exim4.conf
247 file=/etc/exim4/grey_users
248 file=/etc/exim4/helo-check
249 file=/etc/exim4/locals
250 file=/etc/exim4/localusers
251 file=/etc/exim4/manualroute
252 file=/etc/exim4/rbllist
253 file=/etc/exim4/rhsbllist
254 file=/etc/exim4/submission-domains
255 file=/etc/exim4/virtualdomains
256 file=/etc/exim4/whitelist
257 file=/etc/exim4/local-settings.conf
258 file=/etc/exim4/ssl/ca.crt
259 file=/etc/exim4/ssl/ca.crl
260 file=/etc/exim4/ssl/thishost.crt
261 file=/etc/exim4/ssl/thishost.key
262 file=/etc/ssh/ssh_config
263 file=/etc/ssh/sshd_config
266 if not nodeinfo['heavy_exim'].empty?
268 file=/etc/exim4/surbl_whitelist.txt
269 file=/etc/exim4/exim_surbl.pl
270 file=/etc/exim4/ccTLD.txt
271 file=/etc/clamav-unofficial-sigs.conf
272 file=/etc/clamav-unofficial-sigs.dsa.conf
277 file=/etc/munin/plugins/bind
278 file=/etc/munin/plugins/bind_views
279 file=/etc/munin/plugins/cpu
280 file=/etc/munin/plugins/df
281 file=/etc/munin/plugins/df_abs
282 file=/etc/munin/plugins/df_inode
283 file=/etc/munin/plugins/entropy
284 file=/etc/munin/plugins/forks
285 file=/etc/munin/plugins/interrupts
286 file=/etc/munin/plugins/iostat
287 file=/etc/munin/plugins/irqstats
288 file=/etc/munin/plugins/load
289 file=/etc/munin/plugins/memory
290 file=/etc/munin/plugins/ntp_offset
291 file=/etc/munin/plugins/ntp_states
292 file=/etc/munin/plugins/open_files
293 file=/etc/munin/plugins/open_inodes
294 file=/etc/munin/plugins/processes
295 file=/etc/munin/plugins/ps_apache2
296 file=/etc/munin/plugins/ps_exim4
297 file=/etc/munin/plugins/ps_vsftpd
298 file=/etc/munin/plugins/spamassassin
299 file=/etc/munin/plugins/swap
300 file=/etc/munin/plugins/uptime
301 file=/etc/munin/plugins/vmstat
302 file=/etc/munin/plugins/vfstpd
303 file=/etc/munin/plugins/apache_accesses
304 file=/etc/munin/plugins/apache_processes
305 file=/etc/munin/plugins/apache_volume
306 file=/etc/munin/plugins/apache_servers
307 file=/etc/munin/plugins/exim_mailqueue
308 file=/etc/munin/plugins/exim_mailstats
309 file=/etc/munin/plugins/postfix_mailqueue
310 file=/etc/munin/plugins/postfix_mailvolume
311 file=/etc/apache2/conf.d/ressource-limits
312 file=/etc/apache2/mods-enabled/info.conf
313 file=/etc/apache2/mods-enabled/info.load
314 file=/etc/apache2/mods-enabled/server.conf
315 file=/etc/apache2/mods-enabled/server.load
316 file=/etc/apache2/conf.d/server-status
317 file=/etc/apache2/conf.d/local-serverinfo
318 file=/etc/apt/preferences
319 file=/etc/apt/sources.list.d/volatile.list
320 file=/etc/apt/sources.list.d/security.list
321 file=/etc/apt/sources.list.d/buildd.list
322 file=/etc/apt/sources.list.d/debian.org.list
323 file=/etc/apt/sources.list.d/debian.restricted.list
324 file=/etc/apt/sources.list.d/debian.list
325 file=/etc/apt/sources.list.d/backports.org.list
326 file=/etc/apt/apt.conf.d/local-recommends
327 file=/etc/apt/apt.conf.d/local-pdiffs
328 file=/etc/puppet/puppet.conf
329 file=/etc/default/puppet
330 file=/etc/default/postgrey
331 file=/etc/logrotate.d/exim4-paniclog
332 file=/etc/logrotate.d/exim4-base
333 file=/etc/logrotate.d/syslog-ng
334 file=/etc/syslog-ng/syslog-ng.conf
335 file=/usr/sbin/dsa-update-apt-status
336 file=/usr/sbin/dsa-update-samhain-status
337 file=/etc/nagios/nrpe.d/nrpe_dsa.cfg
338 file=/etc/nagios/nrpe.d/debianorg.cfg
339 file=/etc/nagios/obsolete-packages-ignore
340 file=/etc/nagios/obsolete-packages-ignore.d/hostspecific
341 file=/usr/lib/nagios/plugins/dsa-check-packages
342 file=/usr/lib/nagios/plugins/dsa-check-soas
343 file=/usr/lib/nagios/plugins/dsa-check-mirrorsync
344 file=/usr/lib/nagios/plugins/dsa-check-samhain
345 file=/usr/lib/nagios/plugins/dsa-check-statusfile
346 file=/usr/lib/nagios/plugins/dsa-check-dabackup-server
347 file=/usr/lib/nagios/plugins/dsa-check-config
348 file=/usr/lib/nagios/plugins/dsa-check-hpacucli
349 file=/usr/lib/nagios/plugins/dsa-check-raid-mpt
350 file=/usr/lib/nagios/plugins/dsa-check-puppet
351 file=/usr/lib/nagios/plugins/dsa-check-running-kernel
352 file=/usr/lib/nagios/plugins/dsa-check-raid-3ware
353 file=/usr/lib/nagios/plugins/dsa-check-dabackup
354 file=/usr/lib/nagios/plugins/dsa-check-raid-dac960
355 file=/usr/lib/nagios/plugins/dsa-check-udldap-freshness
356 file=/usr/lib/nagios/plugins/dsa-check-raid-areca
357 file=/usr/lib/nagios/plugins/dsa-check-raid-sw
358 file=/usr/lib/nagios/plugins/dsa-update-samhain-status
360 file=/etc/sysctl.d/mmap_min_addr.conf
362 file=/etc/monit/monitrc
363 file=/etc/monit/monit.d/01puppet
364 file=/etc/monit/monit.d/00debian.org
365 file=/etc/cron.d/dsa-puppet-stuff
366 file=/etc/cron.d/dsa-buildd
367 <% if nodeinfo['nagiosmaster'] -%>
368 file=/etc/nagios3/puppetconf.d/auto-hostgroups.cfg
369 file=/etc/nagios3/puppetconf.d/auto-hosts.cfg
370 file=/etc/nagios3/puppetconf.d/auto-services.cfg
371 file=/etc/nagios3/puppetconf.d/auto-dependencies.cfg
372 file=/etc/nagios3/puppetconf.d/auto-hostextinfo.cfg
373 file=/etc/nagios3/puppetconf.d/auto-serviceextinfo.cfg
375 <% if nodeinfo['muninmaster'] -%>
376 file=/etc/munin/munin.conf
378 <% if nodeinfo['puppetmaster'] -%>
381 <% if classes.include?('named::geodns') -%>
382 dir=1/etc/bind/geodns
384 <% if classes.include?('named::secondary') -%>
386 file=/etc/bind/named.conf.debian-zones
388 <% if fqdn == "dijkstra.debian.org" -%>
392 <% if nodeinfo['buildd'] -%>
396 file=/etc/ferm/conf.d/me.conf
397 file=/etc/ferm/conf.d/defs.conf
398 file=/etc/ferm/ferm.conf
402 ## for these files, all modifications (even access time) are reported
403 ## - you may create some interesting-looking file (like /etc/safe_passwd),
404 ## just to watch whether someone will access it ...
409 ## Use for prelinked files or directories holding them
415 ## for these files, only access time is ignored
421 # SuSE (old) has the boot init scripts in /sbin/init.d/*,
422 # so we go 3 levels deep
429 # RedHat and Debian have the bootinit scripts in /etc/init.d/* or /etc/rc.d/*,
430 # so we go 3 levels deep there too
434 # Various directories / files that may include / be SUID/SGID binaries
437 file=/usr/lib/pt_chown
438 # X11, in Debian X7 this is now a symlink
440 #dir=/usr/X11R6/lib/X11/xmcd/bin
442 #file=/usr/lib/apache/suexec
443 #file=/usr/lib/apache/suexec.disabled
450 ## User0 and User1 are sections for files/dirs with user-definable checking
456 ## Here you can assign severities to policy violations.
457 ## If this severity exceeds the treshold of a log facility (see below),
458 ## a policy violation will be logged to that facility.
460 ## Severity for verification failures.
462 # SeverityReadOnly=crit
463 # SeverityLogFiles=crit
464 # SeverityGrowingLogs=crit
465 # SeverityIgnoreNone=crit
466 # SeverityAttributes=crit
471 SeverityReadOnly=crit
472 SeverityLogFiles=crit
473 SeverityGrowingLogs=warn
474 SeverityIgnoreNone=crit
475 SeverityAttributes=crit
479 ## We have a file in IgnoreAll that might or might not be present.
480 ## Setting the severity to 'info' prevents messages about deleted/new file.
482 # SeverityIgnoreAll=crit
483 SeverityIgnoreAll=info
485 ## Files : file access problems
488 ## Dirs : directory access problems
491 ## Names : suspect (non-printable) characters in a pathname
502 ## Switch on/OFF log facilities and set their threshold severity
504 ## Values: debug, info, notice, warn, mark, err, crit, alert, none.
505 ## 'mark' is used for timestamps.
508 ## Use 'none' to SWITCH OFF a log facility
510 ## By default, everything equal to and above the threshold is logged.
511 ## The specifiers '*', '!', and '=' are interpreted as
512 ## 'all', 'all but', and 'only', respectively (like syslogd(8) does,
513 ## at least on Linux). Examples:
515 ## MailSeverity=!warn
516 ## MailSeverity==crit
532 # SyslogSeverity=none
534 ## Remote server (yule)
536 # ExportSeverity=none
538 ## External script or program
540 # ExternalSeverity = none
542 ## Logging to a database
544 # DatabaseSeverity = none
557 #####################################################
561 #####################################################
565 ## --- Check the filesystem for SUID/SGID binaries
570 # SuidCheckActive = yes
572 ## Interval for check (seconds)
574 # SuidCheckInterval = 7200
576 ## Alternative: crontab-like schedule
578 # SuidCheckSchedule = NULL
580 ## Directory to exclude
582 # SuidCheckExclude = NULL
584 ## Limit on files per second (0 == no limit)
588 ## Alternative: yield after every file
590 # SuidCheckYield = no
592 ## Severity of a detection
594 # SeveritySuidCheck = crit
596 ## Quarantine SUID/SGID files if found
598 # SuidCheckQuarantineFiles = yes
600 ## Method for Quarantining files:
601 # 0 - Delete or truncate the file.
602 # 1 - Remove SUID/SGID permissions from file.
603 # 2 - Move SUID/SGID file to quarantine dir.
605 # SuidCheckQuarantineMethod = 0
607 ## For method 1 and 3, really delete instead of truncating
609 # SuidCheckQuarantineDelete = yes
613 ## --- Check for loadable kernel module rootkits (Linux/FreeBSD only)
618 KernelCheckActive = True
620 ## Check interval (seconds); btw., the check is VERY fast
622 # KernelCheckInterval = 300
626 # SeverityKernel = crit
631 ## --- Logging of login/logout events
636 LoginCheckActive = True
638 ## Severity for logins, multiple logins, logouts
641 # SeverityLoginMulti=warn
642 # SeverityLogout=info
644 ## Interval for login/logout checks
646 # LoginCheckInterval = 300
651 ## --- Logging to a relational database
656 # SetDBName = samhain
664 # SetDBUser = samhain
668 # SetDBPassword = (default: none)
672 # SetDBHost = localhost
674 ## Log the server timestamp for received messages
676 # SetDBServerTstamp = True
678 ## Use a persistent connection
680 # UsePersistent = True
684 ## Interface to call external scripts/programs for logging
687 ## The absolute path to the command
688 ## - Each invocation of this directive will end the definition of the
689 ## preceding command, and start the definition of
690 ## an additional, new command
692 # OpenCommand = (no default)
695 ## - log for log messages, srv for messages received by the server
699 ## The command (full command line) to execute
701 # SetCommandLine = (no default)
703 ## The environment (KEY=value; repeat for more)
705 # SetEnviron = TZ=(your timezone)
707 ## The TIGER192 checksum (optional)
709 # SetChecksum = (no default)
711 ## User who runs the command
713 # SetCredentials = (default: samhain process uid)
715 ## Words not allowed in message
717 # SetFilterNot = (none)
719 ## Words required (ALL of them)
721 # SetFilterAnd = (none)
723 ## Words required (at least one)
725 # SetFilterOr = (none)
727 ## Deadtime between consecutive calls
731 ## Add default environment (HOME, PATH, SHELL)
736 #####################################################
738 # Miscellaneous configuration options
740 #####################################################
744 ## whether to become a daemon process
745 ## (this is not honoured on database initialisation)
750 ## whether to test signature of files (init/check/none)
751 ## - if 'none', then we have to decide this on the command line -
753 # ChecksumTest = none
756 ## whether to drop linux capabilities that are not required
757 ## - will make a root process a 'mere mortal' in many respects
761 ## Set nice level (-19 to 19, see 'man nice'),
762 ## and I/O limit (kilobytes per second; 0 == off)
763 ## to reduce load on host.
768 ## The version string to embed in file signature databases
770 # VersionString = NULL
772 ## Interval between time stamp messages
777 ## Interval between file checks
779 # SetFileCheckTime = 600
780 SetFileCheckTime = 7200
782 ## Alternative: crontab-like schedule
784 # FileCheckScheduleOne = NULL
786 ## Alternative: crontab-like schedule(2)
788 # FileCheckScheduleTwo = NULL
790 ## Report only once on modified fles
791 ## Setting this to 'FALSE' will generate a report for any policy
792 ## violation (old and new ones) each time the daemon checks the file system.
794 # ReportOnlyOnce = True
796 ## Report in full detail
798 # ReportFullDetail = False
800 ## Report file timestamps in local time rather than GMT
804 ## The console device (can also be a file or named pipe)
805 ## - There are two console devices. Accordingly, you can use
806 ## this directive a second time to set the second console device.
807 ## If you have not defined the second device at compile time,
808 ## and you don't want to use it, then:
809 ## setting it to /dev/null is less effective than just leaving
810 ## it alone (setting to /dev/null will waste time by opening
811 ## /dev/null and writing to it)
813 # SetConsole = /dev/console
815 ## Activate the SysV IPC message queue
817 # MessageQueueActive = False
820 ## If false, skip reverse lookup when connecting to a host known
821 ## by name rather than IP address (i.e. trust the DNS)
823 # SetReverseLookup = True
827 # Only highest-level (alert) reports will be mailed immediately,
828 # others will be queued. Here you can define, when the queue will
829 # be flushed (Note: the queue is automatically flushed after
830 # completing a file check).
834 ## Maximum number of mails to queue
838 ## Recipient (max. 8)
840 SetMailAddress=samhain-reports@debian.org
842 ## Mail relay (IP address)
843 <% if nodeinfo['smarthost'].empty? -%>
844 SetMailRelay = master.debian.org
846 SetMailRelay = localhost
849 ## Custom subject format
851 MailSubject = [Samhain at %H] %T: %S
853 ## --- end E-Mail ---
855 ## Path to the prelink executable
857 # SetPrelinkPath = /usr/sbin/prelink
859 ## TIGER192 checksum of the prelink executable
861 # SetPrelinkChecksum = (no default)
864 ## Path to the executable. If set, will be checksummed after startup
867 # SamhainPath = (no default)
870 ## The IP address of the log server
872 # SetLogServer = (default: compiled-in)
874 ## The IP address of the time server
876 # SetTimeServer = (default: compiled-in)
878 ## Trusted Users (comma delimited list of user names)
880 # TrustedUser = (no default; this adds to the compiled-in list)
882 ## Path to the file signature database
884 # SetDatabasePath = (default: compiled-in)
886 ## Path to the log file
888 # SetLogfilePath = (default: compiled-in)
890 ## Path to the PID file
892 # SetLockPath = (default: compiled-in)
895 ## The digest/checksum/hash algorithm
897 # DigestAlgo = TIGER192
900 ## Custom format for message header.
901 ## CAREFUL if you use XML logfile format.
910 # MessageHeader="%S %T "
913 ## Don't log path to config/database file on startup
917 ## The syslog facility, if you log to syslog
919 # SyslogFacility = LOG_AUTHPRIV
920 SyslogFacility=LOG_LOCAL2
922 ## The message authentication method
923 ## - If you change this, you *must* change it
924 ## on client *and* server
926 # MACType = HMAC-TIGER
929 ## everything below is ignored
932 #####################################################################
933 # This would be the proper syntax for parts that should only be
934 # included for certain hosts.
935 # You may enclose anything in a @HOSTNAME/@end bracket, as long as the
936 # result still has the proper syntax for the config file.
937 # You may have any number of @HOSTNAME/@end brackets.
938 # HOSTNAME should be the fully qualified 'official' name
939 # (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
940 # No IP number - except if samhain cannot determine the
941 # fully qualified hostname.
947 # These are two examples for conditional inclusion/exclusion
948 # of a machine based on the output from 'uname -srm'
957 #####################################################################