2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
6 #####################################################################
8 # Configuration file template for samhain.
10 #####################################################################
12 # -- empty lines and lines starting with '#', ';' or '//' are ignored
13 # -- boolean options can be Yes/No or True/False or 1/0
14 # -- you can PGP clearsign this file -- samhain will check (if compiled
15 # with support) or otherwise ignore the signature
16 # -- CHECK mail address
18 # To each log facility, you can assign a threshold severity. Only
19 # reports with at least the threshold severity will be logged
20 # to the respective facility (even further below).
22 #####################################################################
24 # SETUP for file system checking:
26 # (i) There are several policies, each has its own section. Put files
27 # into the section for the appropriate policy (see below).
28 # (ii) Section [EventSeverity]:
29 # To each policy, you can assign a severity (further below).
30 # (iii) Section [Log]:
31 # To each log facility, you can assign a threshold severity. Only
32 # reports with at least the threshold severity will be logged
33 # to the respective facility (even further below).
35 #####################################################################
37 #####################################################################
39 # Files are defined with: file = /absolute/path
41 # Directories are defined with: dir = /absolute/path
42 # or with an optional recursion depth (N <= 99): dir = N/absolute/path
44 # Directory inodes are checked. If you only want to check files
45 # in a directory, but not the directory inode itself, use (e.g.):
48 # dir = /some/directory
50 # file = /some/directory
52 # You can use shell-style globbing patterns, like: file = /path/foo*
54 ######################################################################
58 ## Add or subtract tests from the policies
59 ## - if you want to change their definitions,
60 ## you need to do that before using the policies
62 # RedefReadOnly = (no default)
63 # RedefAttributes=(no default)
64 # RedefLogFiles=(no default)
65 # RedefGrowingLogFiles=(no default)
66 # RedefIgnoreAll=(no default)
67 # RedefIgnoreNone=(no default)
68 # RedefUser0=(no default)
69 # RedefUser1=(no default)
73 ## for these files, only changes in permissions and ownership are checked
76 file=/etc/ssh_random_seed
81 file=/etc/passwd.backup
82 file=/etc/shadow.backup
83 file=/etc/postfix/prng_exch
87 file=/etc/lvm/cache/.cache
88 file=/etc/network/run/ifstate
89 file=/var/state/samhain/samhain_file
90 file=/etc/bind/zones/db.debian.net
92 <% if hostname == "geo1" || hostname == "geo2" || hostname == "geo3" -%>
93 file=/etc/bind/named.conf.acl
94 file=/etc/bind/named.conf.options
95 file=/etc/bind/geodns/named.conf.geo.security.debian.org
96 file=/etc/bind/geodns/db.security.debian.org.SA
97 file=/etc/bind/geodns/db.security.debian.org.OC
98 file=/etc/bind/geodns/db.security.debian.org.NA
99 file=/etc/bind/geodns/db.security.debian.org.EU
100 file=/etc/bind/geodns/db.security.debian.org.AS
101 file=/etc/bind/geodns/db.security.debian.org.AN
102 file=/etc/bind/geodns/db.security.debian.org.AF
103 file=/etc/bind/geodns/db.security.debian.org
108 # There are files in /etc that might change, thus changing the directory
109 # timestamps. Put it here as 'file', and in the ReadOnly section as 'dir'.
113 file=/etc/network/run
116 # These are the directories for the files we handle with puppet
122 file=/etc/apt/apt.conf.d
123 file=/etc/apt/sources.list.d
125 file=/etc/logrotate.d
127 file=/etc/nagios/nrpe.d
128 file=/etc/bind/geodns
131 when "spohr.debian.org": extradir="file=/etc/nagios3/puppetconf.d
133 else extradir="file=/etc/puppet"
138 file=/usr/lib/nagios/plugins
141 file=/etc/monit/monit.d
148 ## for these files, changes in signature, timestamps, and size are ignored
155 #####################################################################
157 # This would be the proper syntax for parts that should only be
158 # included for certain hosts.
159 # You may enclose anything in a @HOSTNAME/@end bracket, as long as the
160 # result still has the proper syntax for the config file.
161 # You may have any number of @HOSTNAME/@end brackets.
162 # HOSTNAME should be the fully qualified 'official' name
163 # (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
164 # No IP number - except if samhain cannot determine the
165 # fully qualified hostname.
171 # These are two examples for conditional inclusion/exclusion
172 # of a machine based on the output from 'uname -srm'
182 #####################################################################
186 ## for these files, changes in signature, timestamps, and increase in size
190 file=/var/log/messages
192 file=/var/log/faillog
193 file=/var/log/auth.log
194 file=/var/log/daemon.log
195 file=/var/log/user.log
196 file=/var/log/kern.log
202 ## for these files, no modifications are reported
204 ## This file might be created or removed by the system sometimes.
206 file=/etc/resolv.conf.pcmcia.save
208 file=/etc/postfix/debian.db
209 file=/etc/postfix/debian
210 file=/etc/ssh/ssh_known_hosts
211 file=/etc/ssh/ssh-rsa-shadow
212 file=/var/lib/misc/ssh-rsa-shadow
213 file=/etc/.da-backup.trace
214 file=/etc/postfix/debianhosts
215 file=/etc/postfix/debianhosts.db
217 file=/etc/blkid.tab.old
218 file=/etc/resolv.conf.dhclient-new
220 # We handle these files with puppet - please to not be bothering us
223 file=/etc/samhain/samhainrc
224 file=/etc/munin/munin-node.conf
225 file=/etc/userdir-ldap.confc
226 file=/etc/exim4/blacklist
227 file=/etc/exim4/callout_users
228 file=/etc/exim4/exim4.conf
229 file=/etc/exim4/grey_users
230 file=/etc/exim4/helo-check
231 file=/etc/exim4/locals
232 file=/etc/exim4/localusers
233 file=/etc/exim4/manualroute
234 file=/etc/exim4/rbllist
235 file=/etc/exim4/rcpthosts
236 file=/etc/exim4/rhsbllist
237 file=/etc/exim4/virtualdomains
238 file=/etc/exim4/whitelist
239 file=/etc/exim4/local-auto.conf
240 file=/etc/exim4/local-settings.conf
241 file=/etc/exim4/ssl/ca.crt
242 file=/etc/exim4/ssl/ca.crl
243 file=/etc/exim4/ssl/thishost.crt
244 file=/etc/exim4/ssl/thishost.key
247 if not nodeinfo['heavy_exim'].empty?
249 file=/etc/exim4/surbl_whitelist.txt
250 file=/etc/exim4/exim_surbl.pl
251 file=/etc/exim4/ccTLD.txt
256 file=/etc/apt/preferences
257 file=/etc/apt/sources.list.d/volatile.list
258 file=/etc/apt/sources.list.d/security.list
259 file=/etc/apt/sources.list.d/buildd.list
260 file=/etc/apt/sources.list.d/debian.org.list
261 file=/etc/apt/sources.list.d/debian.restricted.list
262 file=/etc/apt/sources.list.d/debian.list
263 file=/etc/apt/sources.list.d/backports.org.list
264 file=/etc/apt/apt.conf.d/local-recommends
265 file=/etc/apt/apt.conf.d/local-pdiffs
266 file=/etc/puppet/puppet.conf
267 file=/etc/default/puppet
268 file=/etc/default/postgrey
269 file=/etc/logrotate.d/exim4-paniclog
270 file=/etc/logrotate.d/exim4-base
271 file=/etc/logrotate.d/syslog-ng
272 file=/etc/syslog-ng/syslog-ng.conf
273 file=/usr/sbin/dsa-update-apt-status
274 file=/usr/sbin/dsa-update-samhain-status
275 file=/etc/nagios/nrpe.d/nrpe_dsa.cfg
276 file=/etc/nagios/nrpe.d/debianorg.cfg
277 file=/etc/nagios/obsolete-packages-ignore
278 file=/usr/lib/nagios/plugins/dsa-check-packages
279 file=/usr/lib/nagios/plugins/dsa-check-soas
280 file=/usr/lib/nagios/plugins/dsa-check-mirrorsync
281 file=/usr/lib/nagios/plugins/dsa-check-samhain
282 file=/usr/lib/nagios/plugins/dsa-check-statusfile
283 file=/usr/lib/nagios/plugins/dsa-check-dabackup-server
284 file=/usr/lib/nagios/plugins/dsa-check-config
285 file=/usr/lib/nagios/plugins/dsa-check-hpacucli
286 file=/usr/lib/nagios/plugins/dsa-check-raid-mpt
287 file=/usr/lib/nagios/plugins/dsa-check-puppet
288 file=/usr/lib/nagios/plugins/dsa-check-running-kernel
289 file=/usr/lib/nagios/plugins/dsa-check-raid-3ware
290 file=/usr/lib/nagios/plugins/dsa-check-dabackup
291 file=/usr/lib/nagios/plugins/dsa-check-raid-dac960
292 file=/usr/lib/nagios/plugins/dsa-check-udldap-freshness
293 file=/usr/lib/nagios/plugins/dsa-check-raid-areca
294 file=/usr/lib/nagios/plugins/dsa-check-raid-sw
295 file=/usr/lib/nagios/plugins/dsa-update-samhain-status
298 file=/etc/monit/monitrc
299 file=/etc/monit/monit.d/01puppet
300 file=/etc/monit/monit.d/00debian.org
303 when "spohr.debian.org": extrafiles="file=/etc/nagios3/puppetconf.d/auto-hostgroups.cfg
304 file=/etc/nagios3/puppetconf.d/auto-hosts.cfg
305 file=/etc/nagios3/puppetconf.d/auto-services.cfg
306 file=/etc/nagios3/puppetconf.d/auto-dependencies.cfg
307 file=/etc/nagios3/puppetconf.d/auto-hostextinfo.cfg
308 file=/etc/nagios3/puppetconf.d/auto-serviceextinfo.cfg"
309 when "handel.debian.org": extrafiles="dir=8/etc/puppet"
316 ## for these files, all modifications (even access time) are reported
317 ## - you may create some interesting-looking file (like /etc/safe_passwd),
318 ## just to watch whether someone will access it ...
323 ## Use for prelinked files or directories holding them
329 ## for these files, only access time is ignored
335 # SuSE (old) has the boot init scripts in /sbin/init.d/*,
336 # so we go 3 levels deep
343 # RedHat and Debian have the bootinit scripts in /etc/init.d/* or /etc/rc.d/*,
344 # so we go 3 levels deep there too
348 # Various directories / files that may include / be SUID/SGID binaries
351 file=/usr/lib/pt_chown
352 # X11, in Debian X7 this is now a symlink
354 #dir=/usr/X11R6/lib/X11/xmcd/bin
356 #file=/usr/lib/apache/suexec
357 #file=/usr/lib/apache/suexec.disabled
364 ## User0 and User1 are sections for files/dirs with user-definable checking
370 ## Here you can assign severities to policy violations.
371 ## If this severity exceeds the treshold of a log facility (see below),
372 ## a policy violation will be logged to that facility.
374 ## Severity for verification failures.
376 # SeverityReadOnly=crit
377 # SeverityLogFiles=crit
378 # SeverityGrowingLogs=crit
379 # SeverityIgnoreNone=crit
380 # SeverityAttributes=crit
385 SeverityReadOnly=crit
386 SeverityLogFiles=crit
387 SeverityGrowingLogs=warn
388 SeverityIgnoreNone=crit
389 SeverityAttributes=crit
393 ## We have a file in IgnoreAll that might or might not be present.
394 ## Setting the severity to 'info' prevents messages about deleted/new file.
396 # SeverityIgnoreAll=crit
397 SeverityIgnoreAll=info
399 ## Files : file access problems
402 ## Dirs : directory access problems
405 ## Names : suspect (non-printable) characters in a pathname
416 ## Switch on/OFF log facilities and set their threshold severity
418 ## Values: debug, info, notice, warn, mark, err, crit, alert, none.
419 ## 'mark' is used for timestamps.
422 ## Use 'none' to SWITCH OFF a log facility
424 ## By default, everything equal to and above the threshold is logged.
425 ## The specifiers '*', '!', and '=' are interpreted as
426 ## 'all', 'all but', and 'only', respectively (like syslogd(8) does,
427 ## at least on Linux). Examples:
429 ## MailSeverity=!warn
430 ## MailSeverity==crit
446 # SyslogSeverity=none
448 ## Remote server (yule)
450 # ExportSeverity=none
452 ## External script or program
454 # ExternalSeverity = none
456 ## Logging to a database
458 # DatabaseSeverity = none
471 #####################################################
475 #####################################################
479 ## --- Check the filesystem for SUID/SGID binaries
484 # SuidCheckActive = yes
486 ## Interval for check (seconds)
488 # SuidCheckInterval = 7200
490 ## Alternative: crontab-like schedule
492 # SuidCheckSchedule = NULL
494 ## Directory to exclude
496 # SuidCheckExclude = NULL
498 ## Limit on files per second (0 == no limit)
502 ## Alternative: yield after every file
504 # SuidCheckYield = no
506 ## Severity of a detection
508 # SeveritySuidCheck = crit
510 ## Quarantine SUID/SGID files if found
512 # SuidCheckQuarantineFiles = yes
514 ## Method for Quarantining files:
515 # 0 - Delete or truncate the file.
516 # 1 - Remove SUID/SGID permissions from file.
517 # 2 - Move SUID/SGID file to quarantine dir.
519 # SuidCheckQuarantineMethod = 0
521 ## For method 1 and 3, really delete instead of truncating
523 # SuidCheckQuarantineDelete = yes
527 ## --- Check for loadable kernel module rootkits (Linux/FreeBSD only)
532 KernelCheckActive = True
534 ## Check interval (seconds); btw., the check is VERY fast
536 # KernelCheckInterval = 300
540 # SeverityKernel = crit
545 ## --- Logging of login/logout events
550 LoginCheckActive = True
552 ## Severity for logins, multiple logins, logouts
555 # SeverityLoginMulti=warn
556 # SeverityLogout=info
558 ## Interval for login/logout checks
560 # LoginCheckInterval = 300
565 ## --- Logging to a relational database
570 # SetDBName = samhain
578 # SetDBUser = samhain
582 # SetDBPassword = (default: none)
586 # SetDBHost = localhost
588 ## Log the server timestamp for received messages
590 # SetDBServerTstamp = True
592 ## Use a persistent connection
594 # UsePersistent = True
598 ## Interface to call external scripts/programs for logging
601 ## The absolute path to the command
602 ## - Each invocation of this directive will end the definition of the
603 ## preceding command, and start the definition of
604 ## an additional, new command
606 # OpenCommand = (no default)
609 ## - log for log messages, srv for messages received by the server
613 ## The command (full command line) to execute
615 # SetCommandLine = (no default)
617 ## The environment (KEY=value; repeat for more)
619 # SetEnviron = TZ=(your timezone)
621 ## The TIGER192 checksum (optional)
623 # SetChecksum = (no default)
625 ## User who runs the command
627 # SetCredentials = (default: samhain process uid)
629 ## Words not allowed in message
631 # SetFilterNot = (none)
633 ## Words required (ALL of them)
635 # SetFilterAnd = (none)
637 ## Words required (at least one)
639 # SetFilterOr = (none)
641 ## Deadtime between consecutive calls
645 ## Add default environment (HOME, PATH, SHELL)
650 #####################################################
652 # Miscellaneous configuration options
654 #####################################################
658 ## whether to become a daemon process
659 ## (this is not honoured on database initialisation)
664 ## whether to test signature of files (init/check/none)
665 ## - if 'none', then we have to decide this on the command line -
667 # ChecksumTest = none
670 ## whether to drop linux capabilities that are not required
671 ## - will make a root process a 'mere mortal' in many respects
675 ## Set nice level (-19 to 19, see 'man nice'),
676 ## and I/O limit (kilobytes per second; 0 == off)
677 ## to reduce load on host.
682 ## The version string to embed in file signature databases
684 # VersionString = NULL
686 ## Interval between time stamp messages
691 ## Interval between file checks
693 # SetFileCheckTime = 600
694 SetFileCheckTime = 7200
696 ## Alternative: crontab-like schedule
698 # FileCheckScheduleOne = NULL
700 ## Alternative: crontab-like schedule(2)
702 # FileCheckScheduleTwo = NULL
704 ## Report only once on modified fles
705 ## Setting this to 'FALSE' will generate a report for any policy
706 ## violation (old and new ones) each time the daemon checks the file system.
708 # ReportOnlyOnce = True
710 ## Report in full detail
712 # ReportFullDetail = False
714 ## Report file timestamps in local time rather than GMT
718 ## The console device (can also be a file or named pipe)
719 ## - There are two console devices. Accordingly, you can use
720 ## this directive a second time to set the second console device.
721 ## If you have not defined the second device at compile time,
722 ## and you don't want to use it, then:
723 ## setting it to /dev/null is less effective than just leaving
724 ## it alone (setting to /dev/null will waste time by opening
725 ## /dev/null and writing to it)
727 # SetConsole = /dev/console
729 ## Activate the SysV IPC message queue
731 # MessageQueueActive = False
734 ## If false, skip reverse lookup when connecting to a host known
735 ## by name rather than IP address (i.e. trust the DNS)
737 # SetReverseLookup = True
741 # Only highest-level (alert) reports will be mailed immediately,
742 # others will be queued. Here you can define, when the queue will
743 # be flushed (Note: the queue is automatically flushed after
744 # completing a file check).
748 ## Maximum number of mails to queue
752 ## Recipient (max. 8)
754 SetMailAddress=samhain-reports@debian.org
756 ## Mail relay (IP address)
759 if not nodeinfo['smarthost'].empty?
761 SetMailRelay = localhost
765 SetMailRelay = master.debian.org
770 ## Custom subject format
772 MailSubject = [Samhain at %H] %T: %S
774 ## --- end E-Mail ---
776 ## Path to the prelink executable
778 # SetPrelinkPath = /usr/sbin/prelink
780 ## TIGER192 checksum of the prelink executable
782 # SetPrelinkChecksum = (no default)
785 ## Path to the executable. If set, will be checksummed after startup
788 # SamhainPath = (no default)
791 ## The IP address of the log server
793 # SetLogServer = (default: compiled-in)
795 ## The IP address of the time server
797 # SetTimeServer = (default: compiled-in)
799 ## Trusted Users (comma delimited list of user names)
801 # TrustedUser = (no default; this adds to the compiled-in list)
803 ## Path to the file signature database
805 # SetDatabasePath = (default: compiled-in)
807 ## Path to the log file
809 # SetLogfilePath = (default: compiled-in)
811 ## Path to the PID file
813 # SetLockPath = (default: compiled-in)
816 ## The digest/checksum/hash algorithm
818 # DigestAlgo = TIGER192
821 ## Custom format for message header.
822 ## CAREFUL if you use XML logfile format.
831 # MessageHeader="%S %T "
834 ## Don't log path to config/database file on startup
838 ## The syslog facility, if you log to syslog
840 # SyslogFacility = LOG_AUTHPRIV
841 SyslogFacility=LOG_LOCAL2
843 ## The message authentication method
844 ## - If you change this, you *must* change it
845 ## on client *and* server
847 # MACType = HMAC-TIGER
850 ## everything below is ignored
853 #####################################################################
854 # This would be the proper syntax for parts that should only be
855 # included for certain hosts.
856 # You may enclose anything in a @HOSTNAME/@end bracket, as long as the
857 # result still has the proper syntax for the config file.
858 # You may have any number of @HOSTNAME/@end brackets.
859 # HOSTNAME should be the fully qualified 'official' name
860 # (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
861 # No IP number - except if samhain cannot determine the
862 # fully qualified hostname.
868 # These are two examples for conditional inclusion/exclusion
869 # of a machine based on the output from 'uname -srm'
878 #####################################################################