2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
6 #####################################################################
8 # Configuration file template for samhain.
10 #####################################################################
12 # -- empty lines and lines starting with '#', ';' or '//' are ignored
13 # -- boolean options can be Yes/No or True/False or 1/0
14 # -- you can PGP clearsign this file -- samhain will check (if compiled
15 # with support) or otherwise ignore the signature
16 # -- CHECK mail address
18 # To each log facility, you can assign a threshold severity. Only
19 # reports with at least the threshold severity will be logged
20 # to the respective facility (even further below).
22 #####################################################################
24 # SETUP for file system checking:
26 # (i) There are several policies, each has its own section. Put files
27 # into the section for the appropriate policy (see below).
28 # (ii) Section [EventSeverity]:
29 # To each policy, you can assign a severity (further below).
30 # (iii) Section [Log]:
31 # To each log facility, you can assign a threshold severity. Only
32 # reports with at least the threshold severity will be logged
33 # to the respective facility (even further below).
35 #####################################################################
37 #####################################################################
39 # Files are defined with: file = /absolute/path
41 # Directories are defined with: dir = /absolute/path
42 # or with an optional recursion depth (N <= 99): dir = N/absolute/path
44 # Directory inodes are checked. If you only want to check files
45 # in a directory, but not the directory inode itself, use (e.g.):
48 # dir = /some/directory
50 # file = /some/directory
52 # You can use shell-style globbing patterns, like: file = /path/foo*
54 ######################################################################
58 ## Add or subtract tests from the policies
59 ## - if you want to change their definitions,
60 ## you need to do that before using the policies
62 # RedefReadOnly = (no default)
63 # RedefAttributes=(no default)
64 # RedefLogFiles=(no default)
65 # RedefGrowingLogFiles=(no default)
66 # RedefIgnoreAll=(no default)
67 # RedefIgnoreNone=(no default)
68 # RedefUser0=(no default)
69 # RedefUser1=(no default)
70 <% if nodeinfo['buildd'] -%>
71 IgnoreMissing=/etc/lvm/archive/.*.vg
76 ## for these files, only changes in permissions and ownership are checked
79 file=/etc/ssh_random_seed
83 file=/etc/passwd.backup
84 file=/etc/shadow.backup
85 file=/etc/postfix/prng_exch
89 file=/etc/lvm/cache/.cache
90 file=/etc/network/run/ifstate
91 file=/var/state/samhain/samhain_file
92 file=/etc/bind/zones/db.debian.net
94 <% if classes.include?("named::geodns") -%>
96 file=/etc/bind/named.conf.acl
97 file=/etc/bind/named.conf.local
98 file=/etc/bind/geodns/named.conf.geo
99 file=/etc/bind/geodns/recvconf.files
101 <% if classes.include?("named") -%>
102 file=/etc/bind/named.conf.options
104 file=/etc/apache2/conf.d/puppet-builddlist
107 # There are files in /etc that might change, thus changing the directory
108 # timestamps. Put it here as 'file', and in the ReadOnly section as 'dir'.
112 file=/etc/network/run
114 file=/etc/spamassassin/sa-update-keys
116 # These are the directories for the files we handle with puppet
117 file=/etc/apache2/conf.d
118 files=/etc/apache2/mods-enabled
121 file=/etc/munin/plugins
122 file=/etc/munin/plugin-conf.d
126 file=/etc/apt/apt.conf.d
127 file=/etc/apt/sources.list.d
129 file=/etc/logrotate.d
131 file=/etc/nagios/nrpe.d
132 file=/etc/nagios/obsolete-packages-ignore.d
133 file=/etc/bind/geodns
134 <% if nodeinfo['nagiosmaster'] -%>
135 file=/etc/nagios3/puppetconf.d
139 file=/usr/lib/nagios/plugins
142 file=/etc/monit/monit.d
147 file=/etc/ferm/conf.d
150 <% if nodeinfo.has_key?('squeeze') and nodeinfo['squeeze'] %>
156 ## for these files, changes in signature, timestamps, and size are ignored
163 #####################################################################
165 # This would be the proper syntax for parts that should only be
166 # included for certain hosts.
167 # You may enclose anything in a @HOSTNAME/@end bracket, as long as the
168 # result still has the proper syntax for the config file.
169 # You may have any number of @HOSTNAME/@end brackets.
170 # HOSTNAME should be the fully qualified 'official' name
171 # (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
172 # No IP number - except if samhain cannot determine the
173 # fully qualified hostname.
179 # These are two examples for conditional inclusion/exclusion
180 # of a machine based on the output from 'uname -srm'
190 #####################################################################
194 ## for these files, changes in signature, timestamps, and increase in size
198 file=/var/log/messages
200 file=/var/log/faillog
201 file=/var/log/auth.log
202 file=/var/log/daemon.log
203 file=/var/log/user.log
204 file=/var/log/kern.log
210 ## for these files, no modifications are reported
212 ## This file might be created or removed by the system sometimes.
214 file=/etc/resolv.conf
215 <% if nodeinfo['buildd'] -%>
216 file=/etc/dupload.conf
218 file=/etc/resolv.conf.pcmcia.save
220 file=/etc/postfix/debian.db
221 file=/etc/postfix/debian
222 file=/etc/ssh/ssh_known_hosts
223 file=/etc/ssh/ssh-rsa-shadow
224 file=/var/lib/misc/ssh-rsa-shadow
225 file=/etc/.da-backup.trace
226 file=/etc/postfix/debianhosts
227 file=/etc/postfix/debianhosts.db
229 file=/etc/blkid.tab.old
230 file=/etc/resolv.conf.dhclient-new
232 # We handle these files with puppet - please to not be bothering us
236 file=/etc/samhain/samhainrc
237 file=/etc/munin/munin-node.conf
238 file=/etc/munin/plugin-conf.d/munin-node
239 file=/etc/userdir-ldap.confc
240 file=/etc/exim4/blacklist
241 file=/etc/exim4/host_blacklist
242 file=/etc/exim4/callout_users
243 file=/etc/exim4/exim4.conf
244 file=/etc/exim4/grey_users
245 file=/etc/exim4/helo-check
246 file=/etc/exim4/locals
247 file=/etc/exim4/localusers
248 file=/etc/exim4/manualroute
249 file=/etc/exim4/rbllist
250 file=/etc/exim4/rhsbllist
251 file=/etc/exim4/submission-domains
252 file=/etc/exim4/virtualdomains
253 file=/etc/exim4/whitelist
254 file=/etc/exim4/local-settings.conf
255 file=/etc/exim4/ssl/ca.crt
256 file=/etc/exim4/ssl/ca.crl
257 file=/etc/exim4/ssl/thishost.crt
258 file=/etc/exim4/ssl/thishost.key
259 file=/etc/ssh/ssh_config
260 file=/etc/ssh/sshd_config
263 if nodeinfo['heavy_exim']
265 file=/etc/exim4/surbl_whitelist.txt
266 file=/etc/exim4/exim_surbl.pl
267 file=/etc/exim4/ccTLD.txt
268 file=/etc/clamav-unofficial-sigs.conf
269 file=/etc/clamav-unofficial-sigs.dsa.conf
274 file=/etc/munin/plugins/bind
275 file=/etc/munin/plugins/bind_views
276 file=/etc/munin/plugins/cpu
277 file=/etc/munin/plugins/df
278 file=/etc/munin/plugins/df_abs
279 file=/etc/munin/plugins/df_inode
280 file=/etc/munin/plugins/entropy
281 file=/etc/munin/plugins/forks
282 file=/etc/munin/plugins/interrupts
283 file=/etc/munin/plugins/iostat
284 file=/etc/munin/plugins/irqstats
285 file=/etc/munin/plugins/load
286 file=/etc/munin/plugins/memory
287 file=/etc/munin/plugins/ntp_offset
288 file=/etc/munin/plugins/ntp_states
289 file=/etc/munin/plugins/open_files
290 file=/etc/munin/plugins/open_inodes
291 file=/etc/munin/plugins/processes
292 file=/etc/munin/plugins/ps_apache2
293 file=/etc/munin/plugins/ps_exim4
294 file=/etc/munin/plugins/ps_vsftpd
295 file=/etc/munin/plugins/spamassassin
296 file=/etc/munin/plugins/swap
297 file=/etc/munin/plugins/uptime
298 file=/etc/munin/plugins/vmstat
299 file=/etc/munin/plugins/vfstpd
300 file=/etc/munin/plugins/apache_accesses
301 file=/etc/munin/plugins/apache_processes
302 file=/etc/munin/plugins/apache_volume
303 file=/etc/munin/plugins/apache_servers
304 file=/etc/munin/plugins/exim_mailqueue
305 file=/etc/munin/plugins/exim_mailstats
306 file=/etc/munin/plugins/postfix_mailqueue
307 file=/etc/munin/plugins/postfix_mailvolume
308 file=/etc/apache2/conf.d/ressource-limits
309 file=/etc/apache2/mods-enabled/info.conf
310 file=/etc/apache2/mods-enabled/info.load
311 file=/etc/apache2/mods-enabled/server.conf
312 file=/etc/apache2/mods-enabled/server.load
313 file=/etc/apache2/conf.d/server-status
314 file=/etc/apache2/conf.d/local-serverinfo
315 file=/etc/apache2/sites-available/www.debian.org
316 file=/etc/apt/preferences
317 file=/etc/apt/sources.list.d/volatile.list
318 file=/etc/apt/sources.list.d/security.list
319 file=/etc/apt/sources.list.d/buildd.list
320 file=/etc/apt/sources.list.d/debian.org.list
321 file=/etc/apt/sources.list.d/debian.restricted.list
322 file=/etc/apt/sources.list.d/debian.list
323 file=/etc/apt/sources.list.d/backports.org.list
324 file=/etc/apt/apt.conf.d/local-recommends
325 file=/etc/apt/apt.conf.d/local-pdiffs
326 file=/etc/puppet/puppet.conf
327 file=/etc/default/puppet
328 file=/etc/default/postgrey
329 file=/etc/default/syslog-ng
330 file=/etc/logrotate.d/exim4-paniclog
331 file=/etc/logrotate.d/exim4-base
332 file=/etc/logrotate.d/syslog-ng
333 file=/etc/syslog-ng/syslog-ng.conf
334 file=/usr/sbin/dsa-update-apt-status
335 file=/usr/sbin/dsa-update-samhain-status
336 file=/etc/nagios/nrpe.d/nrpe_dsa.cfg
337 file=/etc/nagios/nrpe.d/debianorg.cfg
338 file=/etc/nagios/obsolete-packages-ignore
339 file=/etc/nagios/obsolete-packages-ignore.d/hostspecific
340 file=/usr/lib/nagios/plugins/dsa-check-packages
341 file=/usr/lib/nagios/plugins/dsa-check-soas
342 file=/usr/lib/nagios/plugins/dsa-check-mirrorsync
343 file=/usr/lib/nagios/plugins/dsa-check-samhain
344 file=/usr/lib/nagios/plugins/dsa-check-statusfile
345 file=/usr/lib/nagios/plugins/dsa-check-dabackup-server
346 file=/usr/lib/nagios/plugins/dsa-check-config
347 file=/usr/lib/nagios/plugins/dsa-check-hpacucli
348 file=/usr/lib/nagios/plugins/dsa-check-raid-mpt
349 file=/usr/lib/nagios/plugins/dsa-check-puppet
350 file=/usr/lib/nagios/plugins/dsa-check-running-kernel
351 file=/usr/lib/nagios/plugins/dsa-check-raid-3ware
352 file=/usr/lib/nagios/plugins/dsa-check-dabackup
353 file=/usr/lib/nagios/plugins/dsa-check-raid-dac960
354 file=/usr/lib/nagios/plugins/dsa-check-udldap-freshness
355 file=/usr/lib/nagios/plugins/dsa-check-raid-areca
356 file=/usr/lib/nagios/plugins/dsa-check-raid-sw
357 file=/usr/lib/nagios/plugins/dsa-update-samhain-status
359 file=/etc/sysctl.d/mmap_min_addr.conf
361 file=/etc/monit/monitrc
362 file=/etc/monit/monit.d/01puppet
363 file=/etc/monit/monit.d/00debian.org
364 file=/etc/cron.d/dsa-puppet-stuff
365 file=/etc/cron.d/dsa-buildd
366 <% if nodeinfo['nagiosmaster'] -%>
367 file=/etc/nagios3/puppetconf.d/auto-hostgroups.cfg
368 file=/etc/nagios3/puppetconf.d/auto-hosts.cfg
369 file=/etc/nagios3/puppetconf.d/auto-services.cfg
370 file=/etc/nagios3/puppetconf.d/auto-dependencies.cfg
371 file=/etc/nagios3/puppetconf.d/auto-hostextinfo.cfg
372 file=/etc/nagios3/puppetconf.d/auto-serviceextinfo.cfg
373 file=/etc/nagios3/puppetconf.d/auto-servicegroups.cfg
375 <% if nodeinfo['muninmaster'] -%>
376 file=/etc/munin/munin.conf
378 <% if nodeinfo['puppetmaster'] -%>
381 <% if classes.include?('named::geodns') -%>
382 dir=1/etc/bind/geodns
384 <% if classes.include?('named::authoritative') -%>
386 file=/etc/bind/named.conf.debian-zones
388 <% if fqdn == "dijkstra.debian.org" -%>
391 <% if nodeinfo['buildd'] -%>
395 file=/etc/ferm/conf.d/me.conf
396 file=/etc/ferm/conf.d/defs.conf
397 file=/etc/ferm/ferm.conf
399 <% if nodeinfo.has_key?('squeeze') and nodeinfo['squeeze'] %>
400 file=/etc/unbound/unbound.conf
405 ## for these files, all modifications (even access time) are reported
406 ## - you may create some interesting-looking file (like /etc/safe_passwd),
407 ## just to watch whether someone will access it ...
412 ## Use for prelinked files or directories holding them
418 ## for these files, only access time is ignored
424 # SuSE (old) has the boot init scripts in /sbin/init.d/*,
425 # so we go 3 levels deep
433 # RedHat and Debian have the bootinit scripts in /etc/init.d/* or /etc/rc.d/*,
434 # so we go 3 levels deep there too
438 # Various directories / files that may include / be SUID/SGID binaries
441 file=/usr/lib/pt_chown
442 # X11, in Debian X7 this is now a symlink
444 #dir=/usr/X11R6/lib/X11/xmcd/bin
446 #file=/usr/lib/apache/suexec
447 #file=/usr/lib/apache/suexec.disabled
454 ## User0 and User1 are sections for files/dirs with user-definable checking
460 ## Here you can assign severities to policy violations.
461 ## If this severity exceeds the treshold of a log facility (see below),
462 ## a policy violation will be logged to that facility.
464 ## Severity for verification failures.
466 # SeverityReadOnly=crit
467 # SeverityLogFiles=crit
468 # SeverityGrowingLogs=crit
469 # SeverityIgnoreNone=crit
470 # SeverityAttributes=crit
475 SeverityReadOnly=crit
476 SeverityLogFiles=crit
477 SeverityGrowingLogs=warn
478 SeverityIgnoreNone=crit
479 SeverityAttributes=crit
483 ## We have a file in IgnoreAll that might or might not be present.
484 ## Setting the severity to 'info' prevents messages about deleted/new file.
486 # SeverityIgnoreAll=crit
487 SeverityIgnoreAll=info
489 ## Files : file access problems
492 ## Dirs : directory access problems
495 ## Names : suspect (non-printable) characters in a pathname
506 ## Switch on/OFF log facilities and set their threshold severity
508 ## Values: debug, info, notice, warn, mark, err, crit, alert, none.
509 ## 'mark' is used for timestamps.
512 ## Use 'none' to SWITCH OFF a log facility
514 ## By default, everything equal to and above the threshold is logged.
515 ## The specifiers '*', '!', and '=' are interpreted as
516 ## 'all', 'all but', and 'only', respectively (like syslogd(8) does,
517 ## at least on Linux). Examples:
519 ## MailSeverity=!warn
520 ## MailSeverity==crit
536 # SyslogSeverity=none
538 ## Remote server (yule)
540 # ExportSeverity=none
542 ## External script or program
544 # ExternalSeverity = none
546 ## Logging to a database
548 # DatabaseSeverity = none
561 #####################################################
565 #####################################################
569 ## --- Check the filesystem for SUID/SGID binaries
574 # SuidCheckActive = yes
576 ## Interval for check (seconds)
578 # SuidCheckInterval = 7200
580 ## Alternative: crontab-like schedule
582 # SuidCheckSchedule = NULL
584 ## Directory to exclude
586 # SuidCheckExclude = NULL
588 ## Limit on files per second (0 == no limit)
592 ## Alternative: yield after every file
594 # SuidCheckYield = no
596 ## Severity of a detection
598 # SeveritySuidCheck = crit
600 ## Quarantine SUID/SGID files if found
602 # SuidCheckQuarantineFiles = yes
604 ## Method for Quarantining files:
605 # 0 - Delete or truncate the file.
606 # 1 - Remove SUID/SGID permissions from file.
607 # 2 - Move SUID/SGID file to quarantine dir.
609 # SuidCheckQuarantineMethod = 0
611 ## For method 1 and 3, really delete instead of truncating
613 # SuidCheckQuarantineDelete = yes
617 ## --- Check for loadable kernel module rootkits (Linux/FreeBSD only)
622 #KernelCheckActive = True
624 ## Check interval (seconds); btw., the check is VERY fast
626 # KernelCheckInterval = 300
630 # SeverityKernel = crit
635 ## --- Logging of login/logout events
640 # LoginCheckActive = True
642 ## Severity for logins, multiple logins, logouts
645 # SeverityLoginMulti=warn
646 # SeverityLogout=info
648 ## Interval for login/logout checks
650 # LoginCheckInterval = 300
655 ## --- Logging to a relational database
660 # SetDBName = samhain
668 # SetDBUser = samhain
672 # SetDBPassword = (default: none)
676 # SetDBHost = localhost
678 ## Log the server timestamp for received messages
680 # SetDBServerTstamp = True
682 ## Use a persistent connection
684 # UsePersistent = True
688 ## Interface to call external scripts/programs for logging
691 ## The absolute path to the command
692 ## - Each invocation of this directive will end the definition of the
693 ## preceding command, and start the definition of
694 ## an additional, new command
696 # OpenCommand = (no default)
699 ## - log for log messages, srv for messages received by the server
703 ## The command (full command line) to execute
705 # SetCommandLine = (no default)
707 ## The environment (KEY=value; repeat for more)
709 # SetEnviron = TZ=(your timezone)
711 ## The TIGER192 checksum (optional)
713 # SetChecksum = (no default)
715 ## User who runs the command
717 # SetCredentials = (default: samhain process uid)
719 ## Words not allowed in message
721 # SetFilterNot = (none)
723 ## Words required (ALL of them)
725 # SetFilterAnd = (none)
727 ## Words required (at least one)
729 # SetFilterOr = (none)
731 ## Deadtime between consecutive calls
735 ## Add default environment (HOME, PATH, SHELL)
740 #####################################################
742 # Miscellaneous configuration options
744 #####################################################
748 ## whether to become a daemon process
749 ## (this is not honoured on database initialisation)
754 ## whether to test signature of files (init/check/none)
755 ## - if 'none', then we have to decide this on the command line -
757 # ChecksumTest = none
760 ## whether to drop linux capabilities that are not required
761 ## - will make a root process a 'mere mortal' in many respects
765 ## Set nice level (-19 to 19, see 'man nice'),
766 ## and I/O limit (kilobytes per second; 0 == off)
767 ## to reduce load on host.
772 ## The version string to embed in file signature databases
774 # VersionString = NULL
776 ## Interval between time stamp messages
781 ## Interval between file checks
783 # SetFileCheckTime = 600
784 SetFileCheckTime = 7200
786 ## Alternative: crontab-like schedule
788 # FileCheckScheduleOne = NULL
790 ## Alternative: crontab-like schedule(2)
792 # FileCheckScheduleTwo = NULL
794 ## Report only once on modified fles
795 ## Setting this to 'FALSE' will generate a report for any policy
796 ## violation (old and new ones) each time the daemon checks the file system.
798 # ReportOnlyOnce = True
800 ## Report in full detail
802 # ReportFullDetail = False
804 ## Report file timestamps in local time rather than GMT
808 ## The console device (can also be a file or named pipe)
809 ## - There are two console devices. Accordingly, you can use
810 ## this directive a second time to set the second console device.
811 ## If you have not defined the second device at compile time,
812 ## and you don't want to use it, then:
813 ## setting it to /dev/null is less effective than just leaving
814 ## it alone (setting to /dev/null will waste time by opening
815 ## /dev/null and writing to it)
817 # SetConsole = /dev/console
819 ## Activate the SysV IPC message queue
821 # MessageQueueActive = False
824 ## If false, skip reverse lookup when connecting to a host known
825 ## by name rather than IP address (i.e. trust the DNS)
827 # SetReverseLookup = True
831 # Only highest-level (alert) reports will be mailed immediately,
832 # others will be queued. Here you can define, when the queue will
833 # be flushed (Note: the queue is automatically flushed after
834 # completing a file check).
838 ## Maximum number of mails to queue
842 ## Recipient (max. 8)
844 SetMailAddress=samhain-reports@debian.org
846 ## Mail relay (IP address)
847 <% if nodeinfo['smarthost'].empty? -%>
848 SetMailRelay = master.debian.org
850 SetMailRelay = localhost
853 ## Custom subject format
855 MailSubject = [Samhain at %H] %T: %S
857 ## --- end E-Mail ---
859 ## Path to the prelink executable
861 # SetPrelinkPath = /usr/sbin/prelink
863 ## TIGER192 checksum of the prelink executable
865 # SetPrelinkChecksum = (no default)
868 ## Path to the executable. If set, will be checksummed after startup
871 # SamhainPath = (no default)
874 ## The IP address of the log server
876 # SetLogServer = (default: compiled-in)
878 ## The IP address of the time server
880 # SetTimeServer = (default: compiled-in)
882 ## Trusted Users (comma delimited list of user names)
884 # TrustedUser = (no default; this adds to the compiled-in list)
886 ## Path to the file signature database
888 # SetDatabasePath = (default: compiled-in)
890 ## Path to the log file
892 # SetLogfilePath = (default: compiled-in)
894 ## Path to the PID file
896 # SetLockPath = (default: compiled-in)
899 ## The digest/checksum/hash algorithm
901 # DigestAlgo = TIGER192
904 ## Custom format for message header.
905 ## CAREFUL if you use XML logfile format.
914 # MessageHeader="%S %T "
917 ## Don't log path to config/database file on startup
921 ## The syslog facility, if you log to syslog
923 # SyslogFacility = LOG_AUTHPRIV
924 SyslogFacility=LOG_LOCAL2
926 ## The message authentication method
927 ## - If you change this, you *must* change it
928 ## on client *and* server
930 # MACType = HMAC-TIGER
933 ## everything below is ignored
936 #####################################################################
937 # This would be the proper syntax for parts that should only be
938 # included for certain hosts.
939 # You may enclose anything in a @HOSTNAME/@end bracket, as long as the
940 # result still has the proper syntax for the config file.
941 # You may have any number of @HOSTNAME/@end brackets.
942 # HOSTNAME should be the fully qualified 'official' name
943 # (e.g. 'nixon.watergate.com', not 'nixon'), no aliases.
944 # No IP number - except if samhain cannot determine the
945 # fully qualified hostname.
951 # These are two examples for conditional inclusion/exclusion
952 # of a machine based on the output from 'uname -srm'
961 #####################################################################