modules/exim/templates/eximconf.erb

   1 ##
   2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
   3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
   4 ##
   5
   6 # This is the main exim4 configuration file based on the 28.08.05 version by
   7 # ametzler
   8
   9 # The configuration file uses a set of rules to generate an
  10 # acceptable mail environment for debian.org machines. It deviates
  11 # considerably from what could be considered a standard exim configuration.
  12
  13 # This configuration file brings in the necessary information from
  14 # other databases stored in /etc/exim/ and the files distributed by ud-ldap
  15
  16 # This file is independent of the local host, it should not be changed
  17 # per machine. primary_hostname is used in all places that require per-host
  18 # settings.
  19
  20 # The configuration files in /etc/exim are as follows:
  21 #  locals - This is a list of domains that are considered local. A local
  22 #           domain is essential one that deliveries to /var/mail
  23 #           will be attempted. The users available for local delivery
  24 #           comes from /etc/passwd and /etc/aliases. Wildcards are not
  25 #           permitted.
  26 #  virtualdomains - This is a list of all virtual domains. A virtual domain
  27 #           is much like a local domain, execpt that the delivery location
  28 #           and allowed set of users is controlled by a virtual domain
  29 #           alias file and not /etc/passwd. Wildcards are permitted
  30 #  relayhosts - Hostnames that can send any arbitarily addressed mail to
  31 #           us. This is primarily only usefull for emergancy 'queue
  32 #           flushing' operations, but should be populated with a list
  33 #           of trusted machines. Wildcards are not permitted
  34 #  bsmtp_domains - Domains that we deliver locally via bsmtp
  35 <%- if scope.lookupvar('site::nodeinfo')['mailrelay'] -%>
  36 #  mailhubdomains - Domains for which we are the MX, but the mail is relayed
  37 #           elsewhere.  This is designed for use with small volume or
  38 #           restricted machines that need to use a smarthost for mail
  39 #           traffic.  We will relay for them based on ssl cert validation
  40 #           but we need to teach exim how to route the mail to them.  This is
  41 #           that list.
  42 <%- end -%>
  43
  44 # Exim's wildcard mechanism is a bit odd in that to say "any address in
  45 # debian.org including debian.org" you must use two patterns,
  46 #   *.debian.org
  47 #   debian.org
  48 # Also you can only place a * before a . and as the first char in a string.
  49 # Wildcards always match last so they may be used as a catchall.
  50
  51 # Further details can be found in each of the files.
  52
  53 # Usefull exim commands:
  54 #  exim4 -qf  - Try sending all messages right now, including frozen ones
  55 #  exim4 -bt foo@blah - Write what exim would do if it saw the address
  56 #                      Great for testing virtual domains and forward files
  57
  58 # Special Features for users:
  59 # .forward-foo - is understood as an extension address for bar-foo@cow.com
  60 # .forward-default - is understood to be a catch all for bar-*@cow.com
  61 # .procmailrc - with no .forward file invokes procmail for delivery
  62 #               automatically.
  63
  64 # For virtual domains the first lookup is done against a linear text
  65 # database called 'aliases', then .forward files are consulted. Exim
  66 # filtering is available for these .forward files only. .forward-default
  67 # is the universal catch all for everything not handled.
  68
  69 # Heuristic check (none bad enough to cause a hard reject, but in aggregate
  70 # will trigger things like rcpt to rate limiting or possibly a reject if
  71 # enough hits are triggered.
  72 #
  73 # value is stored in acl_c_scr
  74
  75 ######################################################################
  76 #                    MAIN CONFIGURATION SETTINGS                     #
  77 ######################################################################
  78
  79 <%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
  80 perl_startup = do '/etc/exim4/exim_surbl.pl'
  81 <%- end -%>
  82
  83 # These options specify the Access Control Lists (ACLs) that
  84 # are used for incoming SMTP messages - after the RCPT and DATA
  85 # commands, respectively.
  86
  87 acl_smtp_helo = check_helo
  88 acl_smtp_rcpt = ${if ={$interface_port}{587} {check_submission}{check_recipient}}
  89 acl_smtp_data = check_message
  90 <%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
  91 acl_smtp_mime = acl_check_mime
  92 <%- end -%>
  93 acl_smtp_predata = acl_check_predata
  94
  95 # accept domain literal syntax in e-mail addresses. To actually make use of
  96 # this a router is also required
  97 allow_domain_literals = true
  98
  99 # This setting defines a named domain list called
 100 # local_domains. It will be referenced
 101 # later on by the syntax "+local_domains".
 102 # Other domain and host lists may follow.
 103 # @ is the local FQDN, @[] matches the IP adress of any local interface.
 104
 105 domainlist local_domains = @ : \
 106     @[] : \
 107     localhost : \
 108     ${if exists {/etc/exim4/locals}{lsearch;/etc/exim4/locals}}
 109
 110 domainlist virtual_domains = partial-lsearch;/etc/exim4/virtualdomains
 111
 112 domainlist submission_domains = ${if exists {/etc/exim4/submission-domains}{/etc/exim4/submission-domains}{}}
 113
 114 domainlist bsmtp_domains = ${if exists {/etc/exim4/bsmtp}{partial-lsearch;/etc/exim4/bsmtp}{}}
 115
 116 domainlist handled_domains = +local_domains : +virtual_domains : +bsmtp_domains
 117
 118 localpartlist local_only_users = lsearch;/etc/exim4/localusers
 119
 120 localpartlist postmasterish = postmaster : abuse : hostmaster
 121
 122 hostlist debianhosts = <; ; 127.0.0.1 ; ::1 ; /var/lib/misc/thishost/debianhosts ; 89.16.166.49 ; 82.195.75.76 ; 2001:41b8:202:deb:bab5:0:52c3:4b4c
 123
 124 hostlist reservedaddrs = <%= scope.lookupvar('site::nodeinfo')['reservedaddrs'] %>
 125
 126 <%- if scope.lookupvar('site::nodeinfo')['mailrelay'] -%>
 127 # Domains we relay for; that is domains that aren't considered local but we
 128 # accept mail for them.
 129 domainlist mailhubdomains = lsearch;/etc/exim4/manualroute
 130
 131 <%- end -%>
 132 tls_certificate = /etc/exim4/ssl/thishost.crt
 133 tls_privatekey = /etc/exim4/ssl/thishost.key
 134 tls_try_verify_hosts = *
 135 tls_verify_certificates = /etc/exim4/ssl/ca.crt
 136 tls_crl = /etc/exim4/ssl/ca.crl
 137
 138 # The setting below causes Exim to do a reverse DNS lookup on all incoming
 139 # IP calls, in order to get the true host name. If you feel this is too
 140 # expensive, you can specify the networks for which a lookup is done, or
 141 # remove the setting entirely.
 142 host_lookup = *
 143 # dns_ipv4_lookup = !localhost (disabled upon sgrans request, zobel, 2010-03-16)
 144
 145 # If this option is set, then any process that is running as one of the
 146 # listed users may pass a message to Exim and specify the sender's
 147 # address using the "-f" command line option, without Exim's adding a
 148 # "Sender" header.
 149
 150 untrusted_set_sender = *
 151
 152 # Some operating systems use the "gecos" field in the system password file
 153 # to hold other information in addition to users' real names. Exim looks up
 154 # this field when it is creating "sender" and "from" headers. If these options
 155 # are set, exim uses "gecos_pattern" to parse the gecos field, and then
 156 # expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
 157 # by the pattern.
 158
 159 gecos_pattern = ^([^,:]*)
 160 gecos_name = $1
 161
 162 # This tells exim to immediately discard error messages (ie double bounces).
 163 ignore_bounce_errors_after = 0s
 164 auto_thaw = 1d
 165 timeout_frozen_after=14d
 166
 167 message_size_limit = 100M
 168 message_logs = false
 169 smtp_accept_max_per_host = ${if match_ip {$sender_host_address}{+debianhosts}{0}{7}}
 170 <%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
 171 smtp_accept_max = 300
 172 smtp_accept_queue = 200
 173 smtp_accept_queue_per_connection = 50
 174 smtp_accept_reserve = 25
 175 <%- else -%>
 176 smtp_accept_max = 30
 177 smtp_accept_queue = 20
 178 smtp_accept_queue_per_connection = 10
 179 smtp_accept_reserve = 5
 180 <%- end -%>
 181 smtp_reserve_hosts = +debianhosts
 182
 183 split_spool_directory = true
 184 check_spool_inodes = 200
 185 check_spool_space  = 20M
 186
 187 delay_warning =
 188
 189 <%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
 190 message_body_visible = 5000
 191 queue_run_max = 50
 192 deliver_queue_load_max = 50
 193 queue_only_load = 35
 194 smtp_load_reserve = 20
 195 <%- else -%>
 196 queue_run_max = 5
 197 deliver_queue_load_max = <%= [scope.lookupvar('::processorcount').to_i,2].max * 5 %>
 198 queue_only_load = <%= [scope.lookupvar('::processorcount').to_i,2].max * 4 %>
 199 <%- end -%>
 200 queue_list_requires_admin = false
 201
 202 <%- if has_variable?("clamd") && clamd == "true" -%>
 203 av_scanner = clamd:/var/run/clamav/clamd.ctl
 204 <%- end -%>
 205
 206 <%=
 207 ports = []
 208 out = "daemon_smtp_ports = "
 209 ports << 25
 210
 211 if scope.lookupvar('site::nodeinfo')['bugsmaster'] or scope.lookupvar('site::nodeinfo')['bugsmx']
 212   ports << 587
 213 end
 214
 215 if not scope.lookupvar('site::nodeinfo')['mail_port'].to_s.empty?
 216   ports << scope.lookupvar('site::nodeinfo')['mail_port']
 217 end
 218
 219 if scope.lookupvar('site::nodeinfo')['mailrelay']
 220   ports << scope.lookupvar('site::nodeinfo')['smarthost_port']
 221 end
 222
 223 out += ports.uniq.sort.join(" : ")
 224 out
 225 %>
 226
 227 admin_groups = adm
 228 remote_sort_domains = *.debian.org:*.debian.net
 229
 230 pipelining_advertise_hosts = !*
 231 tls_advertise_hosts = *
 232 smtp_enforce_sync = true
 233
 234 log_selector = +tls_cipher +tls_peerdn +queue_time +deliver_time +smtp_connection +smtp_incomplete_transaction +smtp_confirmation
 235
 236 received_header_text = Received: ${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
 237                                  {${if def:sender_ident {from ${quote_local_part:$sender_ident} }}${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
 238                                  ${if and {{eq {$tls_certificate_verified}{1}}{def:tls_peerdn}}{from $tls_peerdn (verified)\n\t}}\
 239                                  by $primary_hostname ${if def:received_protocol {with $received_protocol}} ${if def:tls_cipher {($tls_cipher)\n\t}}\
 240                                  (Exim $version_number)\n\t\
 241                                  ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}\
 242                                  id $message_exim_id${if def:received_for {\n\tfor $received_for}}
 243
 244 # macro definitions.
 245 # Do not wrap!
 246 VDOMAINDATA = ${lookup{$domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
 247 WHITELIST = ${if match_domain{$domain}{+virtual_domains}\
 248             {${if exists {${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}\
 249             {${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}{$value}{}}}{}}}\
 250             {/etc/exim4/whitelist} } : \
 251             ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-whitelist}{$value}{}}
 252 GREYLIST_LOCAL_PARTS = ${if match_domain{$domain}{+virtual_domains}\
 253                        {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
 254                        {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
 255                        {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}}}} : \
 256                        ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}
 257 RT_QUEUE_MAP = /srv/rt.debian.org/mail/rt_queue_map
 258
 259 ######################################################################
 260 #                        ACL CONFIGURATION                           #
 261 ######################################################################
 262 begin acl
 263
 264 acl_spamlovers:
 265   # There are a few profiles that don't want much smtp time checking of
 266   # mail.  It's easier to track them in one place
 267
 268   accept  condition      = ${if eq {$acl_m_prf}{PopconMail}}
 269   accept  condition      = ${if eq {$acl_m_prf}{BugsMail}}
 270   deny
 271
 272 acl_getprofile:
 273   # This is a bad hack to reset the variable, by defining it be something
 274   # never referenced.
 275
 276   warn    set acl_m_rprf = $acl_m_undefined
 277
 278   warn    recipients     = survey@popcon.debian.org
 279           set acl_m_rprf = PopconMail
 280
 281   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 282
 283   warn    local_parts    = +local_only_users
 284           domains        = +local_domains
 285           hosts          = !+debianhosts
 286           set acl_m_rprf = localonly
 287
 288 <%- if scope.lookupvar('site::nodeinfo')['mailrelay'] -%>
 289   warn    local_parts    = +local_only_users
 290           domains        = +mailhubdomains
 291           hosts          = !+debianhosts
 292           set acl_m_rprf = localonly
 293
 294 <%- end -%>
 295   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 296
 297 <%- if scope.lookupvar('site::nodeinfo')['rtmaster'] -%>
 298   warn    domains        = rt.debian.org
 299           set acl_m_rprf = RTMail
 300
 301   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 302
 303 <%- end -%>
 304 <%- if scope.lookupvar('site::nodeinfo')['bugsmaster'] or scope.lookupvar('site::nodeinfo')['bugsmx'] -%>
 305   warn    domains        = bugs.debian.org
 306           set acl_m_rprf = BugsMail
 307
 308   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 309
 310 <%- end -%>
 311 <%- if scope.lookupvar('site::nodeinfo')['packagesmaster'] -%>
 312   warn    domains        = packages.debian.org
 313           set acl_m_rprf = PackagesMail
 314
 315   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 316
 317 <%- end -%>
 318 <%- if scope.lookupvar('site::nodeinfo')['packagesqamaster'] -%>
 319   warn    recipients     = owner@packages.qa.debian.org : postmaster@packages.qa.debian.org
 320           set acl_m_rprf = PTSOwner
 321
 322   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 323
 324   warn    senders        = :
 325           domains        = packages.qa.debian.org
 326           condition      = ${if match{$local_part}{\N^bounces+\N}}
 327           set acl_m_rprf = PTSListBounce
 328
 329   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 330
 331   warn    domains        = packages.qa.debian.org
 332           set acl_m_rprf = PTSMail
 333
 334   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 335
 336 <%- end -%>
 337   warn    recipients     = change@db.debian.org : changes@db.debian.org : chpasswd@db.debian.org : ping@db.debian.org : recommend@nm.debian.org
 338           set acl_m_rprf = DBSignedMail
 339
 340   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 341
 342   warn    domains        = +virtual_domains
 343           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
 344           condition      = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{markup}}
 345           set acl_m_rprf = markup
 346
 347   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 348
 349   warn    domains        = +virtual_domains
 350           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
 351           condition      = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{blackhole}}
 352           set acl_m_rprf = blackhole
 353
 354   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 355
 356   warn    domains        = +virtual_domains
 357           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
 358           condition      = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{markup}}
 359           set acl_m_rprf = markup
 360
 361   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 362
 363   warn    domains        = +virtual_domains
 364           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
 365           condition      = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{blackhole}}
 366           set acl_m_rprf = blackhole
 367
 368   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 369
 370   warn    domains        = +local_domains
 371           condition      = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{markup}}
 372           set acl_m_rprf = markup
 373
 374   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 375
 376   warn    domains        = +local_domains
 377           condition      = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{blackhole}}
 378           set acl_m_rprf = blackhole
 379
 380   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 381
 382   warn    set acl_m_rprf = normal
 383
 384   accept
 385
 386 check_helo:
 387
 388   warn    set acl_c_scr    = 0
 389
 390 <%- if scope.lookupvar('site::nodeinfo')['mailrelay'] -%>
 391   accept  verify   = certificate
 392
 393 <%- end -%>
 394 <%- if scope.lookupvar('site::nodeinfo')['smarthost'].empty? -%>
 395   # These are in HELO acl so that they are only run once.  They increment a counter,
 396   # so we don't want it to increment per rcpt to.
 397
 398   warn    dnslists       = list.dnswl.org&0.0.0.3
 399           log_message    = Hit on list.dnswl.org for $sender_host_address
 400           set acl_c_scr  = ${eval:$acl_c_scr-30}
 401
 402   warn    dnslists       = list.dnswl.org&0.0.0.2
 403           log_message    = Hit on list.dnswl.org for $sender_host_address
 404           set acl_c_scr  = ${eval:$acl_c_scr-20}
 405
 406   warn    dnslists       = list.dnswl.org
 407           log_message    = Hit on list.dnswl.org for $sender_host_address
 408           set acl_c_scr  = ${eval:$acl_c_scr-10}
 409
 410   warn    condition      = ${if isip {$sender_helo_name}{true}{false}}
 411           log_message    = remote host used IP address in HELO/EHLO greeting
 412           set acl_c_scr  = ${eval:$acl_c_scr+20}
 413
 414   warn    !hosts         = +debianhosts
 415           condition      = ${if eq{$host_lookup_failed}{1}}
 416           set acl_c_scr  = ${eval:$acl_c_scr+20}
 417
 418   warn    !hosts         = +debianhosts
 419           condition      = ${if eq{$host_lookup_failed}{0}}
 420           condition      = ${if match{$sender_host_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
 421           set acl_c_scr  = ${eval:$acl_c_scr+20}
 422
 423   warn    !hosts         = +debianhosts
 424           condition      = ${if match{$sender_helo_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
 425           set acl_c_scr  = ${eval:$acl_c_scr+20}
 426
 427   warn    !hosts         = +debianhosts
 428           dnslists       = dul.dnsbl.sorbs.net
 429           set acl_c_scr  = ${eval:$acl_c_scr+15}
 430
 431   # If the sender's helo name is empty, the message will be rejected later
 432   # because the helo is empty.  If the rDNS lookup failed, we are already
 433   # going to greylist them, so no sense worrying about it here.  Finally,
 434   # if rDNS does not match helo name (both lower cased first), greylist.
 435
 436   warn    !hosts         = +debianhosts
 437           condition      = ${if eq {$host_lookup_failed}{1}{no}{yes}}
 438           condition      = ${if def:sender_helo_name {yes}{no}}
 439           condition      = ${if eq {${lc:$sender_helo_name}}{${lc:$sender_host_name}}{no}{yes}}
 440           log_message    = HELO doesn't match rDNS
 441           set acl_c_scr  = ${eval:$acl_c_scr+8}
 442
 443   # Regexes of doom
 444   # matches 098325879 - looks fishy
 445
 446   warn condition        = ${if and { \
 447                                      { !match{$sender_helo_name}{\N^\[.+\]$\N} } \
 448                                      { !match{$sender_helo_name}{\N^(?i)((?=[^-])[a-z0-9-]*[a-z0-9]\.)+[a-z]{2,6}$\N} } \
 449                                     } \
 450                             }
 451        log_message      = non-FQDN HELO
 452        set acl_c_scr    = ${eval:$acl_c_scr+12}
 453
 454   # Matches DOMAIN99.com - looks bad
 455
 456   warn condition       = ${if match {$sender_helo_name}{\N^[A-Z]+[A-Z0-9\-]+\.[A-Za-z0-9]+$\N}}
 457        log_message     = SHOUTING HELO
 458        set acl_c_scr   = ${eval:$acl_c_scr+7}
 459
 460   # Random HELO (run of 7 consonants) (constructed by viruses).  We purposefully
 461   # skip matching on machines named .*smtp.*, since that's 4 already.  This is a fairly
 462   # naive test, so it's not worth much
 463
 464   warn condition       = ${if match {${lc:$sender_helo_name}}{smtp}{no}{yes}}
 465        condition       = ${if match {${lc:$sender_helo_name}}{\N^[a-z0-9]+\.[a-z]+$\N}}
 466        condition       = ${if match {${lc:$sender_helo_name}}{\N.*[bcdfghjklmnpqrstvwxz]{7,}.*\.[a-z]+$\N}}
 467        log_message     = random HELO
 468        set acl_c_scr   = ${eval:$acl_c_scr+5}
 469
 470 <%- else -%>
 471   drop !hosts          = +debianhosts
 472        log_message     = mail from non-d.o host
 473        message         = Interesting.  I doubt that should have happened.
 474
 475 <%- end -%>
 476   # Implicit, but simpler to just say it
 477   accept
 478
 479 #!!# ACL that is used after the RCPT command on the submission port
 480 check_submission:
 481
 482   # Accept if the source is local SMTP (i.e. not over TCP/IP).
 483   # We do this by testing for an empty sending host field.
 484   accept  hosts = +debianhosts
 485
 486 <%- if scope.lookupvar('site::nodeinfo')['mailrelay'] -%>
 487   accept  verify   = certificate
 488
 489 <%- end -%>
 490   # Defer after too many bad RCPT TO's.  Legit MTAs will retry later.
 491   # This is a rough pass at preventing addres harvesting or other mail blasts.
 492
 493   defer  log_message   = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
 494          message       = Too many bad recipients, try again later
 495          condition     = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
 496
 497   defer
 498           ratelimit      = 5 / 60m / per_rcpt / $sender_host_address
 499           !hosts         = +debianhosts
 500           message        = sorry, only 5 reports per hour for submission
 501
 502   accept  domains  = +local_domains
 503           hosts    = +debianhosts
 504           endpass
 505           verify   = recipient
 506
 507 <%- if scope.lookupvar('site::nodeinfo')['mailrelay'] -%>
 508   accept  domains  = +mailhubdomains
 509           endpass
 510           verify   = recipient/callout=30s,defer_ok,use_sender,no_cache
 511
 512 <%- end -%>
 513   accept  domains  = +submission_domains
 514           endpass
 515           verify   = recipient
 516
 517   deny    message = relay not permitted
 518
 519 #!!# ACL that is used after the RCPT command
 520 check_recipient:
 521
 522 <%- if scope.lookupvar('site::nodeinfo')['mailrelay'] -%>
 523   accept  verify   = certificate
 524
 525 <%- end -%>
 526   accept  hosts = <; ::1 ; 127.0.0.1 ; @
 527   warn    acl           = acl_getprofile
 528           condition     = ${if eq{$acl_m_prf}{}}
 529           set acl_m_prf = $acl_m_rprf
 530
 531   defer   condition     = ${if eq{$acl_m_prf}{$acl_m_rprf}{no}{yes}}
 532           message       = Different profile, please retry
 533           log_message   = Only one profile at a time, please
 534
 535   # Defer after too many bad RCPT TO's.  Legit MTAs will retry later.
 536   # This is a rough pass at preventing address harvesting or other mail blasts.
 537
 538   defer  log_message   = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
 539          !acl          = acl_spamlovers
 540          message       = Too many bad recipients, try again later
 541          !hosts        = +debianhosts
 542          condition     = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
 543
 544   # Dump spambots that are so stupid they say helo as our IP address
 545
 546   drop   !hosts        = +debianhosts
 547          !acl          = acl_spamlovers
 548          condition     = ${if eq {$sender_helo_name}{$interface_address}{yes}{no}}
 549          message       = HELO mismatch Forged HELO for ($sender_helo_name)
 550
 551   # Also for spambots that say helo as us or one of our domains
 552
 553   drop   !hosts        = +debianhosts
 554          !acl          = acl_spamlovers
 555          condition     = ${if match_domain{$sender_helo_name}{$primary_hostname:+handled_domains}}
 556          condition     = ${if !match{$sender_host_name}{${rxquote:$sender_helo_name}\N$\N}}
 557          message       = HELO mismatch Forged HELO for ($sender_helo_name)
 558
 559   # This logic gives you a list of commonly forged domains in helo to reject against
 560
 561   warn set acl_m_frg   = ${lookup{$sender_helo_name} \
 562                            nwildlsearch{/etc/exim4/helo-check} \
 563                           {${if eq{$value}{}{$sender_helo_name}{$value}}}{}}
 564
 565   # This is a failsafe in case DNS fails - we defer instead of hard reject if they
 566   # say helo as a name in the list but we can't look them up
 567
 568   defer  !hosts        = +debianhosts
 569          !acl          = acl_spamlovers
 570          condition     = ${if eq{$acl_m_frg}{}{no}{yes}}
 571          condition     = ${if eq{$sender_host_name}{}{yes}{no}}
 572          condition     = ${if eq{$host_lookup_failed}{1}{no}{yes}}
 573          message       = Access temporarily denied. Resolve failed PTR for $sender_host_address
 574
 575   # If DNS works, go ahead and reject them
 576
 577   drop   !hosts        = +debianhosts
 578          !acl          = acl_spamlovers
 579          condition     = ${if and { {!eq{$acl_m_frg}{}}{!match{$sender_host_name}{${rxquote:$acl_m_frg}\N$\N}}}{yes}{no}}
 580          message       = HELO mismatch Forged HELO for ($sender_helo_name)
 581
 582   # disabled accounts don't even get local mail.
 583   deny   domains       = +virtual_domains
 584          local_parts   = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}\
 585                                      {lsearch;${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}\
 586                                      {}}
 587          message       = ${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}{$value}}
 588
 589   deny   local_parts   = lsearch;/var/lib/misc/$primary_hostname/mail-disable
 590          domains       = +local_domains
 591          message       = ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-disable}{$value}}
 592
 593   deny   domains       = +virtual_domains
 594          local_parts   = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
 595                                      {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
 596                                      {}}
 597          hosts         = !+debianhosts
 598          message       = mail for <$local_part@$domain> only accepted from debian.org machines
 599
 600   # Accept if the source is local SMTP (i.e. not over TCP/IP).
 601   # We do this by testing for an empty sending host field.
 602   accept  hosts = :
 603
 604   deny    domains       = +handled_domains
 605           local_parts   = ^[.] : ^.*[@%!/|]
 606
 607   deny    domains       = !+handled_domains
 608           local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
 609
 610 # forwards mail to @d.o address, even if it's a bounce from master, no reply
 611 # from source address; rejecting all mail now.
 612   deny    recipients    = mendoza@debian.org
 613           hosts         = 65.110.39.147 : 64.39.31.15
 614           message       = <mendoza@kenny.linuxsis.net> cannot forward here while mailer-daemon mail is not caught
 615
 616   deny    recipients    = risko@debian.org
 617           senders       = :
 618           message       = please stop joe-jobbing this user now
 619
 620   deny    condition     = ${lookup{$sender_address_local_part}lsearch{/etc/exim4/localusers}{true}}
 621           sender_domains= +local_domains
 622           hosts         = !+debianhosts
 623           message       = mail from <$sender_address> not allowed externally
 624
 625   deny    sender_domains= +virtual_domains
 626           condition     = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localusers}}}}
 627           condition     = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/localusers}}}{true}}
 628           hosts         = !+debianhosts
 629           message       = mail from <$sender_address> not allowed externally
 630
 631   deny    condition     = ${if match_domain{$sender_address_domain}{+virtual_domains}{1}{0}}
 632           condition     = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
 633           condition     = ${if match_local_part {$sender_address_local_part}{${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
 634           message       = no mail should ever come from <$sender_address>
 635
 636   warn    condition     = ${if eq{$acl_m_prf}{localonly}}
 637           set acl_m_lrc = ${if eq{$acl_m_lrc}{}{$local_part@$domain}{$acl_m_lrc, $local_part@$domain}}
 638
 639 <%- if scope.lookupvar('site::nodeinfo')['packagesmaster'] -%>
 640   warn    condition      = ${if eq {$acl_m_prf}{PackagesMail}}
 641           condition      = ${if eq {$sender_address}{$local_part@$domain}}
 642           message        = X-Packages-FromTo-Same: yes
 643
 644 <%- end -%>
 645   deny    condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 646           !verify        = sender
 647
 648   defer   !hosts         = +debianhosts
 649           condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 650           condition      = ${if >{${eval:$acl_c_scr+0}}{0}}
 651           ratelimit      = 10 / 60m / per_rcpt / $sender_host_address
 652           message        = slow down (no reverse dns, mismatched ehlo, dialup, or in blacklists)
 653
 654 <%- if has_variable?("policydweight") && policydweight == "true" -%>
 655   # Check with policyd-weight - this only works with a version after etch's,
 656   # sadly.  etch's version attempts to hold the socket open, since that's what
 657   # postfix expects.  Exim, on the other hand, expects the remote side to close
 658   # the socket when it's finished sending data, so it see each transaction as
 659   # an incomplete read.  I'm sure there's a way we could force exim to do
 660   # something sick and clever to force either the interpretation or the socket
 661   # closure, but I'm fairly sure it's now worth it, since the backport of
 662   # policyd-weight is trivial.
 663   warn  !hosts         = +debianhosts
 664         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 665         set acl_m_pw   = ${readsocket{inet:127.0.0.1:12525}\
 666                           {request=smtpd_access_policy\n\
 667                            protocol_state=RCPT\n\
 668                            protocol_name=${uc:$received_protocol}\n\
 669                            helo_name=$sender_helo_name\n\
 670                            queue_id=$message_exim_id\n\
 671                            sender=$sender_address\n\
 672                            recipient=$local_part@$domain\n\
 673                            recipient_count=$rcpt_count\n\
 674                            client_address=$sender_host_address\n\
 675                            client_name=$sender_host_name\n\
 676                            reverse_client_name=$sender_host_name\n\
 677                            instance=$sender_host_address.$sender_address.$sender_helo_name\n\n}\
 678                           {20s}{\n}{socket failure}}
 679
 680   # Defer on socket error
 681   defer !hosts         = +debianhosts
 682         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 683         condition      = ${if eq{$acl_m_pw}{socket failure}{yes}{no}}
 684         message        = Cannot connect to policyd-weight. Please try again later.
 685
 686   # Set proposed action to $acl_m_act and message to $acl_m_mes
 687   warn  !hosts         = +debianhosts
 688         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 689         set acl_m_mes  = ${extract{action}{$acl_m_pw}}
 690         set acl_m_act  = ${sg{$acl_m_pw}{\Naction=[^ ]+ (.*)\n\n\N}{\$1}}
 691
 692   # Add X-policyd-weight header line to message
 693   warn  !hosts         = +debianhosts
 694         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 695         message        = $acl_m_mes
 696         condition      = ${if eq{$acl_m_act}{PREPEND}{yes}{no}}
 697
 698   # Write log message, if policyd-weight can't run checks
 699   warn  !hosts         = +debianhosts
 700         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 701         log_message    = policyd-weight message: $acl_m_mes
 702         condition      = ${if eq{$acl_m_act}{DUNNO}{yes}{no}}
 703
 704   # Deny mails which policyd-weight thinks are spam
 705   deny  !hosts         = +debianhosts
 706         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 707         message        = policyd-weight said: $acl_m_mes
 708         condition      = ${if eq{$acl_m_act}{550}{yes}{no}}
 709
 710   # Defer messages when policyd-weight suggests so.
 711   defer  !hosts         = +debianhosts
 712          condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 713          message        = policyd-weight said: $acl_m_mes
 714          condition      = ${if eq{$acl_m_act}{450}{yes}{no}}
 715
 716 <%- end -%>
 717 <%- if scope.lookupvar('site::nodeinfo')['rtmaster'] -%>
 718   warn    condition     = ${if eq{$acl_m_prf}{RTMail}}
 719           set acl_m12   = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}{match{$local_part}{3520}}{match{$local_part}{3645}}} {RTMailRecipientHasSubaddress}}}}
 720   # temporary hack because weasel screwed up and gave people an rt-3520@ address, which doesn't really work normally.  and rt-3645
 721   #set acl_m12  = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}} {RTMailRecipientHasSubaddress}}}}
 722
 723
 724 <%- end -%>
 725 <%- if has_variable?("greylistd") && greylistd == "true" -%>
 726   defer
 727     message  = $sender_host_address is not yet authorized to deliver mail from <$sender_address> to <$local_part@$domain>.
 728     log_message = greylisted.
 729     local_parts    = ${if match_domain{$domain}{+virtual_domains}\
 730                      {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
 731                      {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
 732                      {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}} : \
 733                      ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}}}
 734     !senders       = :
 735     !hosts         = : +debianhosts : WHITELIST : \
 736                      ${if exists {/etc/greylistd/whitelist-hosts}\
 737                                  {/etc/greylistd/whitelist-hosts}{}} : \
 738                      ${if exists {/var/lib/greylistd/whitelist-hosts}\
 739                                  {/var/lib/greylistd/whitelist-hosts}{}}
 740     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 741     !authenticated = *
 742     domains        = +handled_domains
 743     condition      = ${readsocket{/var/run/greylistd/socket}\
 744                                  {--grey \
 745                                   $sender_host_address \
 746                                   $sender_address \
 747                                   $local_part@$domain}\
 748                                  {5s}{}{false}}
 749
 750 <%- elsif has_variable?("postgrey") && postgrey == "true" -%>
 751   # next three are greylisting, inspired by http://www.bebt.de/blog/debian/archives/2006/07/30/T06_12_27/index.html
 752   # this adds acl_m_grey if there isn't one (so unique per message)
 753   warn
 754     !senders       = :
 755     !hosts         = : +debianhosts : WHITELIST
 756     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 757     condition      = ${if def:acl_m_grey {no}{yes}}
 758     set acl_m_grey = $pid.$tod_epoch.$sender_host_port
 759
 760   # and defers the message if postgrey thinks it should be defered ...
 761   defer
 762     !senders       = :
 763     !hosts         = : +debianhosts : WHITELIST
 764     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 765     !authenticated = *
 766     domains        = +handled_domains
 767     local_parts    = GREYLIST_LOCAL_PARTS
 768     set acl_m_pgr  = request=smtpd_access_policy\n\
 769                      protocol_state=RCPT\n\
 770                      protocol_name=${uc:$received_protocol}\n\
 771                      instance=${acl_m_grey}\n\
 772                      helo_name=${sender_helo_name}\n\
 773                      client_address=${substr_-3:${mask:$sender_host_address/24}}\n\
 774                      client_name=${sender_host_name}\n\
 775                      sender=${sender_address}\n\
 776                      recipient=$local_part@$domain\n\n
 777     set acl_m_pgr  = ${sg{\
 778                          ${readsocket{/var/run/postgrey/socket}{$acl_m_pgr}\
 779                                {5s}{}{action=DUNNO}}\
 780                      }{action=}{}}
 781     message        = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
 782     log_message    = greylisted.
 783     condition      = ${if eq{${uc:${substr{0}{5}{$acl_m_pgr}}}}{DEFER}}
 784
 785  # ... or adds a header with information about how long the delay was
 786  warn
 787     !senders       = :
 788     !hosts         = : +debianhosts : WHITELIST
 789     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 790     !authenticated = *
 791     domains        = +handled_domains
 792     local_parts    = GREYLIST_LOCAL_PARTS
 793     condition      = ${if eq{${uc:${substr_0_7:$acl_m_pgr}}}{PREPEND}}
 794     message        = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
 795
 796 <%- end -%>
 797   accept  local_parts   = +postmasterish
 798           domains       = +handled_domains
 799
 800   deny    hosts        = ${if exists{/etc/exim4/host_blacklist}{/etc/exim4/host_blacklist}{}}
 801           message      = I'm terribly sorry, but it seems you have been blacklisted
 802           log_message  = blacklisted IP
 803
 804   deny   log_message   = <$sender_address> is blacklisted
 805          senders       = ${if exists{/etc/exim4/blacklist}{/etc/exim4/blacklist}{}}
 806          message       = We have blacklisted <$sender_address>.  Please stop mailing us
 807
 808 <%- if scope.lookupvar('site::nodeinfo')['smarthost'].empty? -%>
 809   deny    message  = host $sender_host_address is listed in $dnslist_domain; see $dnslist_text
 810           dnslists = ${if match_domain{$domain}{+virtual_domains}\
 811                      {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}\
 812                      {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}{$value}{}}}{}}}\
 813                      {${lookup{$local_part}lsearch{/etc/exim4/rbllist}{$value}{}}}} : \
 814                      ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rbl}{$value}{}}
 815           domains       = +handled_domains
 816           !hosts        = +debianhosts : WHITELIST
 817
 818 <%- end -%>
 819   deny    message  = domain $sender_address_domain is listed in $dnslist_domain; see $dnslist_text
 820           dnslists = ${if match_domain{$domain}{+virtual_domains}\
 821                      {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}\
 822                      {${expand:${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}{$value}{}}}}{}}}\
 823                      {${expand:${lookup{$local_part}lsearch{/etc/exim4/rhsbllist}{$value}{}}}}} : \
 824                      ${expand:${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rhsbl}{$value}{}}}
 825           domains       = +handled_domains
 826           !hosts        = +debianhosts : WHITELIST
 827
 828 <%- if scope.lookupvar('site::nodeinfo')['smarthost'].empty? -%>
 829   deny    domains  = +handled_domains
 830           local_parts = ${if match_domain{$domain}{+virtual_domains}\
 831                         {${if exists {${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}\
 832                         {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}{$local_part}{}}}{}}}\
 833                         {${lookup{$local_part}lsearch{/etc/exim4/callout_users}{$local_part}{}}}} : \
 834                         ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-callout}{$local_part}{}}
 835           !hosts   = +debianhosts : WHITELIST
 836           !verify  = sender/callout=90s,maxwait=300s
 837
 838 <%- end -%>
 839 <%- if scope.lookupvar('site::nodeinfo')['mailrelay'] -%>
 840   accept  domains  = +mailhubdomains
 841           endpass
 842           verify   = recipient/callout=30s,defer_ok,use_sender,no_cache
 843
 844 <%- end -%>
 845   accept  domains  = +handled_domains
 846           endpass
 847           verify   = recipient/defer_ok
 848
 849   accept  hosts         = +debianhosts
 850
 851   accept  authenticated = *
 852
 853   deny    message = relay not permitted
 854
 855 <%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
 856 acl_check_mime:
 857
 858  accept  verify        = certificate
 859  accept  hosts         = +debianhosts
 860
 861  discard condition     = ${if <{$message_size}{256000}}
 862          condition     = ${if eq {$acl_m_prf}{blackhole}}
 863          set acl_m_srb = ${perl{surblspamcheck}}
 864          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 865          log_message   = discarded surbl message for $recipients
 866
 867   deny   condition     = ${if <{$message_size}{256000}}
 868          condition     = ${if eq {$acl_m_prf}{markup}{no}{yes}}
 869          condition     = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 870          set acl_m_srb = ${perl{surblspamcheck}}
 871          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 872          log_message   = $acl_m_srb
 873          message       = $acl_m_srb
 874
 875   warn   condition     = ${if <{$message_size}{256000}}
 876          condition     = ${if eq {$acl_m_prf}{markup}}
 877          set acl_m_srb = ${perl{surblspamcheck}}
 878          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 879          message       = X-Surbl-Hit: $primary_hostname: $acl_m_srb
 880
 881   accept
 882
 883 <%- end -%>
 884 acl_check_predata:
 885   deny   condition     = ${if eq{$acl_m_prf}{localonly}}
 886          message       = mail for $acl_m_lrc is only accepted internally
 887
 888   accept
 889
 890
 891 #!!# ACL that is used after the DATA command
 892 check_message:
 893
 894   # Some people put from hostmaster@something.debian.org in the From
 895   # header.  Take their crack pipe away.
 896   drop   condition = ${if match{${lc:$h_From:}}{\Npostmaster@([^.]+\.)?debian\.org\N}}
 897
 898 <%- if scope.lookupvar('site::nodeinfo')['rtmaster'] -%>
 899   deny    condition = ${if eq {$acl_m_prf}{RTMail}}
 900           condition = ${if and{{!match {${lc:$rh_Subject:}} {debian rt}} \
 901                                {!match {${lc:$rh_Subject:]}} {\N\[rt.debian.org \N}} \
 902                                {!match {$acl_m12}{RTMailRecipientHasSubaddress}}}}
 903           message  = messages to the Request Tracker system require a subject tag or a subaddress
 904
 905 <%- end -%>
 906 <%- if scope.lookupvar('site::nodeinfo')['packagesqamaster'] -%>
 907   deny    !hosts  = +debianhosts : 217.196.43.134
 908           condition = ${if eq {$acl_m_prf}{PTSMail}}
 909           condition = ${if def:h_X-PTS-Approved:{false}{true}}
 910           message   = messages to the PTS require an X-PTS-Approved header
 911
 912 <%- end -%>
 913   deny    condition      = ${if eq {$acl_m_prf}{DBSignedMail}}
 914           condition      = ${if and {{!match {$message_body}{PGP MESSAGE}}              \
 915                                      {!match {$message_body}{PGP SIGNED MESSAGE}}       \
 916                                      {!match {$message_body}{PGP SIGNATURE}}            \
 917                                      {!match {$header_content-type:}{multipart/signed}} \
 918                                      {!match {$header_content-type:}{pgp}}              \
 919                                     }                                                   \
 920                             }
 921           message        = Mail to this address needs to be PGP-signed
 922
 923   accept  verify    = certificate
 924   accept  hosts     = +debianhosts
 925
 926   deny    condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 927           !verify   = header_syntax
 928           message   = Invalid syntax in the header
 929
 930 # RFC 822 and 2822 say that headers must be ASCII.  This kinda emulates
 931 # postfix's strict_7bit_headers option, but only checks a few common problem
 932 # headers, as there doesn't appear to be an easy way to check them all.
 933   deny
 934           condition       = ${if or {{match {$rh_Subject:}{[\200-\377]}}\
 935                                  {match {$rh_To:}{[\200-\377]}}\
 936                                  {match {$rh_From:}{[\200-\377]}}\
 937                                  {match {$rh_Cc:}{[\200-\377]}}}{true}{false}}
 938           condition       = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 939           message         = improper use of 8-bit data in message header: message rejected
 940
 941   deny
 942           condition       = ${if match {$rh_Subject:}{[^[:print:]]\{8\}}{true}{false}}
 943           condition       = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 944           message         = Your mailer is not RFC 2047 compliant: message rejected
 945
 946 <%- if has_variable?("clamd") && clamd == "true" -%>
 947   discard condition       = ${if eq {$acl_m_prf}{blackhole}}
 948           demime          = *
 949           malware         = */defer_ok
 950           log_message     = discarded malware message for $recipients
 951
 952   deny    condition       = ${if eq {$acl_m_prf}{markup}{no}{yes}}
 953           condition       = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 954           demime          = *
 955           malware         = */defer_ok
 956           message         = malware detected: $malware_name: message rejected
 957
 958   warn    condition       = ${if eq {$acl_m_prf}{markup}}
 959           demime          = *
 960           malware         = */defer_ok
 961           message         = X-malware detected: $malware_name
 962
 963 <%- end -%>
 964 <%- if scope.lookupvar('site::nodeinfo').has_key?('heavy_exim') and scope.lookupvar('site::nodeinfo')['heavy_exim'] -%>
 965  discard condition     = ${if <{$message_size}{256000}}
 966          condition     = ${if eq {$acl_m_prf}{blackhole}}
 967          set acl_m_srb = ${perl{surblspamcheck}}
 968          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 969          log_message   = discarded surbl message for $recipients
 970
 971   deny   condition     = ${if <{$message_size}{256000}}
 972          condition     = ${if eq {$acl_m_prf}{markup}{no}{yes}}
 973          condition     = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 974          set acl_m_srb = ${perl{surblspamcheck}}
 975          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 976          log_message   = $acl_m_srb
 977          message       = $acl_m_srb
 978
 979   warn   condition     = ${if <{$message_size}{256000}}
 980          condition     = ${if eq {$acl_m_prf}{markup}}
 981          set acl_m_srb = ${perl{surblspamcheck}}
 982          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 983          message       = X-Surbl-Hit: $primary_hostname: $acl_m_srb
 984
 985 <%- end -%>
 986   # Check header_sender except for survey@popcon.d.o
 987   deny    condition    = ${if eq{$acl_m_prf}{PopconMail}{false}{true}}
 988           !verify      = header_sender
 989           message      = No valid sender found in the From:, Sender: and Reply-to: headers
 990
 991 <%- if scope.lookupvar('site::nodeinfo')['packagesmaster'] -%>
 992   deny  message        = Congratulations, you scored $spam_score points.
 993         log_message    = spam: $spam_score points.
 994         condition      = ${if eq {$acl_m_prf}{PackagesMail}}
 995         !authenticated = *
 996         !verify        = certificate
 997         !hosts         = +debianhosts
 998         condition      = ${if <{$message_size}{256000}}
 999         spam           = pkg_user : true
1000         condition      = ${if >{$spam_score_int}{59}}
1001
1002 <%- end -%>
1003   accept
1004
1005
1006
1007 ######################################################################
1008 #                      REWRITE CONFIGURATION                         #
1009 ######################################################################
1010
1011
1012
1013 begin rewrite
1014
1015 \N^buildd_(.*)@franck\.debian\.org$\N buildd_$1@buildd.debian.org T
1016 *@debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1017 *@people.debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1018 #*@${primary_hostname} "${if exists{/etc/exim4/email-addresses}{${lookup{$1}lsearch{/etc/exim4/email-addresses}{$value}fail}}fail}" fFs
1019 m68k@buildd.debian.org m68k-build@nocrew.org Ttrbc
1020
1021
1022 #!!#######################################################!!#
1023 #!!# Here follow routers created from the old routers,   #!!#
1024 #!!# for handling non-local domains.                     #!!#
1025 #!!#######################################################!!#
1026
1027 begin routers
1028
1029
1030
1031 ######################################################################
1032 #                      ROUTERS CONFIGURATION                         #
1033 #                Specifies how addresses are handled                 #
1034 ######################################################################
1035 #                          ORDER DOES MATTER                         #
1036 #     An address is passed to each in turn until it is accepted.     #
1037 ######################################################################
1038
1039 <%- if scope.lookupvar('site::nodeinfo')['mailrelay'] -%>
1040 relay_manualroute:
1041   driver = manualroute
1042   domains = +mailhubdomains
1043   transport = remote_smtp
1044   route_data = ${lookup{$domain}lsearch{/etc/exim4/manualroute}}
1045   require_files = /etc/exim4/manualroute
1046
1047 <%- end -%>
1048 bsmtp:
1049   debug_print = "R: bsmtp for $local_part@$domain"
1050   driver = manualroute
1051   domains = +bsmtp_domains
1052   require_files = /etc/exim4/bsmtp
1053   route_list = * ${extract{file}{\
1054                    ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1055                      {$value}fail}}}
1056   transport = bsmtp
1057
1058 # This router routes to remote hosts over SMTP by explicit IP address,
1059 # given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
1060 # require this facility, which is why it is enabled by default in Exim.
1061 ipliteral:
1062   debug_print = "R: ipliteral for $local_part@$domain"
1063   driver = ipliteral
1064   domains = !+handled_domains
1065   transport = remote_smtp
1066   ignore_target_hosts = +reservedaddrs
1067
1068 <%=
1069 out = ""
1070 if not scope.lookupvar('site::nodeinfo')['smarthost'].empty?
1071 out = '
1072 smarthost:
1073   debug_print = "R: smarthost for $local_part@$domain"
1074   driver = manualroute
1075   domains = !+handled_domains
1076   transport = remote_smtp_smarthost
1077   route_list = * ' + scope.lookupvar('site::nodeinfo')['smarthost']
1078   if scope.lookupvar('site::nodeinfo')['smarthost'] == 'mailout.debian.org'
1079     out += '/MX'
1080   end
1081   out += '
1082   host_find_failed = defer
1083   same_domain_copy_routing = yes
1084   no_more
1085 '
1086 end
1087 out
1088 %>
1089
1090 # This router routes to remote hosts over SMTP using a DNS lookup.
1091 # Ignore reserved network responses, including localhost.
1092 dnslookup:
1093   debug_print = "R: dnslookup for $local_part@$domain"
1094   driver = dnslookup
1095   domains = !+handled_domains
1096   transport = remote_smtp
1097   ignore_target_hosts = +reservedaddrs
1098   no_more
1099
1100 postmasterish:
1101   debug_print = "R: postmasterish for $local_part@$domain"
1102   driver = redirect
1103   verify = false
1104   unseen = true
1105   expn = true
1106   local_parts = +postmasterish
1107   domains = +handled_domains
1108   data = debian-admin@debian.org
1109   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1110
1111 # This router handles aliasing using a traditional /etc/aliases file.
1112 # If any of your aliases expand to pipes or files, you will need to set
1113 # up a user and a group for these deliveries to run under. You can do
1114 # this by uncommenting the "user" option below (changing the user name
1115 # as appropriate) and adding a "group" option if necessary.
1116
1117 system_aliases:
1118   debug_print = "R: system_aliases for $local_part@$domain"
1119   driver = redirect
1120   allow_defer
1121   allow_fail
1122   data = ${lookup{$local_part}lsearch*{/etc/aliases}}
1123   domains = +local_domains
1124   file_transport = address_file
1125   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1126   pipe_transport = address_pipe
1127   retry_use_local_part
1128
1129 # This router handles forwarding using traditional .forward files.
1130 # It also allows mail filtering when a forward file starts with the
1131 # string "# Exim filter": to disable filtering, uncomment the "filter"
1132 # option. The check_ancestor option means that if the forward file
1133 # generates an address that is an ancestor of the current one, the
1134 # current one gets passed on instead. This covers the case where A is
1135 # aliased to B and B has a .forward file pointing to A.
1136
1137 # For standard debian setup of one group per user, it is acceptable---normal
1138 # even---for .forward to be group writable. If you have everyone in one
1139 # group, you should comment out the "modemask" line. Without it, the exim
1140 # default of 022 will apply, which is probably what you want.
1141
1142 userforward_verify:
1143   debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1144   driver = redirect
1145   check_ancestor
1146   user = Debian-exim
1147   no_check_local_user
1148   directory_transport = address_directory
1149 <%- if fqdn == "master.debian.org" -%>
1150   domains = +local_domains : debian.org
1151 <%- else -%>
1152   domains = +local_domains
1153 <%- end -%>
1154   # filter - I have disabled filtering to force users to use .forward-foo files
1155   # or procmail. This will make it easier to move mailers in the future
1156   #
1157   # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1158   # also checks if the .forward-bar exists, if not then it uses
1159   # .forward-default instead.
1160   file = $home/.forward\
1161          ${if eq{}{$local_part_suffix}{}{\
1162            ${if exists {${home}/.forward${local_part_suffix}} \
1163              {${local_part_suffix}}{-default}}\
1164            }\
1165           }
1166   file_transport = address_file
1167   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1168   local_part_suffix = -*
1169   local_part_suffix_optional
1170   modemask = 002
1171   pipe_transport = address_pipe
1172   reply_transport = address_reply
1173   require_files = $home
1174   router_home_directory = ${lookup passwd{$local_part}{${extract{5}{:}{$value}}}fail}
1175   verify_only
1176
1177 # This is a senmailesque alias file lookup
1178 virt_aliases:
1179   debug_print = "R: virt_aliases for $local_part@$domain"
1180   driver = redirect
1181   allow_defer
1182   allow_fail
1183   data = ${if exists{\
1184            ${extract{directory}{VDOMAINDATA}{${value}/aliases}}}\
1185            {${lookup{$local_part}lsearch*{\
1186               ${extract{directory}{VDOMAINDATA}{$value/aliases}}\
1187            }}}}
1188   directory_transport = address_directory
1189   domains = +virtual_domains
1190   file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1191   cannot_route_message = Unknown user
1192   group = ${extract{group}{VDOMAINDATA}}
1193   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1194   pipe_transport = address_pipe
1195   qualify_preserve_domain
1196   retry_use_local_part
1197   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1198   transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1199   user = ${extract{user}{VDOMAINDATA}}
1200
1201 # No direct match, so try doing a regex match if there's an
1202 # aliases.regex
1203 virt_aliases_regex:
1204   debug_print = "R: virt_aliases_regex for $local_part$local_part_suffix@$domain"
1205   driver = redirect
1206   allow_defer
1207   allow_fail
1208   data = ${if exists{\
1209            ${extract{directory}{VDOMAINDATA}{${value}/aliases.regex}}}\
1210            {${lookup{$local_part}nwildlsearch*{\
1211               ${extract{directory}{VDOMAINDATA}{$value/aliases.regex}}\
1212            }}}}
1213   directory_transport = address_directory
1214   domains = +virtual_domains
1215   file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1216   cannot_route_message = Unknown user
1217   group = ${extract{group}{VDOMAINDATA}}
1218   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1219   pipe_transport = address_pipe
1220   qualify_preserve_domain
1221   retry_use_local_part
1222   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1223   transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1224   user = ${extract{user}{VDOMAINDATA}}
1225
1226 userforward:
1227   debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1228   driver = redirect
1229   check_ancestor
1230   check_local_user
1231   directory_transport = address_directory
1232 <%- if fqdn == "master.debian.org" -%>
1233   domains = +local_domains : debian.org
1234 <%- else -%>
1235   domains = +local_domains
1236 <%- end -%>
1237   # filter - I have disabled filtering to force users to use .forward-foo files
1238   # or procmail. This will make it easier to move mailers in the future
1239   #
1240   # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1241   # also checks if the .forward-bar exists, if not then it uses
1242   # .forward-default instead.
1243   file = $home/.forward\
1244          ${if eq{}{$local_part_suffix}{}{\
1245            ${if exists {${home}/.forward${local_part_suffix}} \
1246              {${local_part_suffix}}{-default}}\
1247            }\
1248           }
1249   file_transport = address_file
1250   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1251   local_part_suffix = -*
1252   local_part_suffix_optional
1253   modemask = 002
1254   pipe_transport = address_pipe
1255   reply_transport = address_reply
1256   require_files = $home
1257   no_verify
1258
1259 # This delivers to procmail
1260 procmail:
1261   debug_print = "R: procmail for $local_part@$domain"
1262   driver = accept
1263   check_local_user
1264 <%- if fqdn == "master.debian.org" -%>
1265   domains = +local_domains : debian.org
1266 <%- else -%>
1267   domains = +local_domains
1268 <%- end -%>
1269   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1270   local_part_suffix = -*
1271   local_part_suffix_optional
1272   no_verify
1273   no_expn
1274   require_files = $local_part:$home/.procmailrc
1275   transport = procmail_pipe
1276   transport_current_directory = $home
1277
1278 # This driver delivers to the LDAP generated alias file.
1279 ldap_aliases:
1280   debug_print = "R: ldap_aliases for $local_part@$domain"
1281   driver = redirect
1282   allow_defer
1283   allow_fail
1284   data = ${if exists{/var/lib/misc/$primary_hostname/user-forward.cdb}\
1285              {${lookup{$local_part}cdb\
1286                {/var/lib/misc/$primary_hostname/user-forward.cdb}}}}
1287   domains = +local_domains
1288   file_transport = address_file
1289   local_part_suffix = -*
1290   local_part_suffix_optional
1291   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1292   pipe_transport = address_pipe
1293   retry_use_local_part
1294
1295 # This director matches local user mailboxes.
1296 localuser:
1297   debug_print = "R: localuser for $local_part@$domain"
1298   driver = accept
1299   check_local_user
1300   domains = +local_domains
1301   local_part_suffix = -*
1302   local_part_suffix_optional
1303   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1304   # Disable if the user has never logged in
1305   require_files = $home
1306   transport = local_delivery
1307   no_more
1308
1309 # Now we begin the Virtual Domain configuration
1310 # Everything before here should apply only to the local domains with a
1311 # domains= rule
1312
1313 <%- if scope.lookupvar('site::nodeinfo')['packagesmaster'] -%>
1314 # This router delivers for packages.d.o
1315 packages:
1316   debug_print = "R: packages for $local_part@$domain"
1317   driver = redirect
1318   file_transport = address_file
1319   pipe_transport = address_pipe
1320   domains = packages.debian.org
1321   require_files = /org/packages.debian.org/conf/maintainer
1322   data = ${lookup{$local_part}cdb{/org/packages.debian.org/conf/maintainer.cdb}}
1323   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1324   transport_home_directory = /org/packages.debian.org/mail
1325   transport_current_directory = /org/packages.debian.org/mail
1326   check_ancestor
1327   retry_use_local_part
1328   no_more
1329
1330 <%- end -%>
1331 <%- if scope.lookupvar('site::nodeinfo')['rtmaster'] -%>
1332 # This router delivers for rt.d.o
1333 rt_force_new_verbose:
1334   debug_print = "R: rt for $local_part+new@$domain"
1335   driver = redirect
1336   domains = rt.debian.org
1337   require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1338   local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1339   local_part_suffix = +new
1340   pipe_transport = rt_pipe
1341   data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1342   headers_remove = Subject
1343   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1344
1345 # FIXME: figure out how to generalize this approach so that all of the following would work
1346 # - rt+NNNN@rt.debian.org          : attach correspondence to ticket (verbose)
1347 # - rt+NNNN-quiesce@rt.debian.org  : attach correspondence to ticket (quiesce)
1348 # - rt+NNNN-<action>@rt.debian.org : attach correspondence to ticket (some action)
1349 # requires modification to custom condition in 'scrips'
1350 rt_force_new_quiesce:
1351   debug_print = "R: rt for $local_part+new-quiesce@$domain"
1352   driver = redirect
1353   domains = rt.debian.org
1354   require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1355   local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1356   local_part_suffix = +new-quiesce
1357   pipe_transport = rt_pipe
1358   data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1359   headers_remove = Subject
1360   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nX-RT-Mode: quiesce\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1361
1362 rt_otherwise:
1363   debug_print = "R: rt for $local_part@$domain"
1364   driver = redirect
1365   domains = rt.debian.org
1366   require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1367   local_parts = ${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1368   local_part_suffix = +*
1369   local_part_suffix_optional
1370   pipe_transport = rt_pipe
1371   data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --extension ticket --action ${if match{$local_part}{.*-comment.*}{comment}{${if match{$local_part}{.*-done.*}{correspond-resolve}{correspond}}}}"
1372   headers_remove = Subject
1373   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1374 <%- end -%>
1375
1376 # exim4 fails the router if it can't change to the user/group for delivery
1377 # during verification.  So we have to seperate the cases of verifying
1378 # the virts, and delivering to them.  blah.
1379
1380 virt_direct_verify:
1381   debug_print = "R: virt_direct for $local_part@$domain"
1382   driver = redirect
1383   no_check_local_user
1384   user = Debian-exim
1385   allow_filter
1386   modemask = 002
1387   directory_transport = address_directory
1388   domains = +virtual_domains
1389   local_part_suffix = -*
1390   local_part_suffix_optional
1391   file = $home/.forward-\
1392               ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1393                    {default}}
1394   file_transport = address_file
1395   pipe_transport = address_pipe
1396   reply_transport = address_reply
1397   retry_use_local_part
1398   router_home_directory = ${extract{directory}{VDOMAINDATA}}
1399   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1400   verify_only
1401
1402 # This is a qmailesque deliver into a directory of .forward files
1403 virt_direct:
1404   debug_print = "R: virt_direct for $local_part@$domain"
1405   driver = redirect
1406   allow_filter
1407   allow_fail
1408   allow_defer
1409   no_check_local_user
1410   directory_transport = address_directory
1411   domains = +virtual_domains
1412   file = $home/.forward-\
1413               ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1414                    {default}}
1415   file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1416   group = ${extract{group}{VDOMAINDATA}}
1417   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1418   modemask = 002
1419   local_part_suffix = -*
1420   local_part_suffix_optional
1421   pipe_transport = address_pipe
1422   reply_transport = address_reply
1423   retry_use_local_part
1424   router_home_directory = ${extract{directory}{VDOMAINDATA}}
1425   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1426   no_verify
1427   user = ${extract{user}{VDOMAINDATA}}
1428   #debug_print = .forward-${if exists {${home}/.forward-${local_part}} {${local_part}} {default}}
1429
1430 # This router delivers to the LDAP generated mail-forward file.
1431 # It's only really useful for debian.org
1432 virt_users:
1433   debug_print = "R: virt_users for $local_part@$domain"
1434   driver = redirect
1435   allow_defer
1436   allow_fail
1437   router_home_directory = ${extract{directory}{VDOMAINDATA}}
1438   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1439   user = ${extract{user}{VDOMAINDATA}}
1440   group = ${extract{group}{VDOMAINDATA}}
1441   data = ${if exists{${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}\
1442              {${lookup{$local_part}cdb\
1443              {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}
1444   domains = +virtual_domains
1445   file_transport = address_file
1446   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1447   pipe_transport = address_pipe
1448   local_part_suffix = -*
1449   local_part_suffix_optional
1450   retry_use_local_part
1451
1452 <%=
1453 out = ""
1454 if scope.lookupvar('site::nodeinfo')['bugsmaster'] or scope.lookupvar('site::nodeinfo')['bugsmx']
1455   domain = 'bugs.debian.org'
1456   if scope.lookupvar('site::nodeinfo')['bugsmaster']
1457     domain = 'bugs-master.debian.org'
1458   end
1459   out = '
1460 # This router delivers for bugs.d.o
1461 bugs:
1462   debug_print = "R: bugs for $local_part@$domain"
1463   driver = accept
1464   transport = bugs_pipe
1465   domains = ' + domain + '
1466   cannot_route_message = Unknown or archived bug
1467   require_files = /org/bugs.debian.org/mail/run-procmail
1468   no_more
1469   local_parts = ${if match\
1470                   {$local_part}\
1471                   {\N^(\d+)(\d{2})(?:-(?:(?:submit|maintonly|quiet|forwarded|done|close|request|submitter)|(?:unsubscribe|ignore|help|(?:sub(?:scribe|help|yes|approve|reject))|unsubyes|bounce|probe|approve|reject|setlistyes|setlistsilentyes).*))?$\N}\
1472                {${if exists{/org/bugs.debian.org/spool/db-h/$2/$1$2.summary}\
1473                {$local_part}fail}}fail}
1474 '
1475 end
1476 out
1477 %>
1478 ######################################################################
1479 #                      TRANSPORTS CONFIGURATION                      #
1480 ######################################################################
1481 #                       ORDER DOES NOT MATTER                        #
1482 #     Only one appropriate transport is called for each delivery.    #
1483 ######################################################################
1484
1485
1486 begin transports
1487
1488 # This transport is used for local delivery to user mailboxes. On debian
1489 # systems group mail is used so we can write to the /var/mail
1490 # directory. (The alternative, which most other unixes use, is to deliver
1491 # as the user's own group, into a sticky-bitted directory)
1492 local_delivery:
1493   driver = appendfile
1494   file = /var/mail/${local_part}
1495   group = mail
1496   mode = 0660
1497   no_mode_fail_narrower
1498   return_path_add
1499
1500 # This transport is used for handling pipe addresses generated by alias
1501 # or .forward files. It has a conventional name, since it is not actually
1502 # mentioned elsewhere in this configuration file. (A different name *can*
1503 # be specified via the "address_pipe_transport" option if you really want
1504 # to.) If the pipe generates any standard output, it is returned to the sender
1505 # of the message as a delivery error. Set return_fail_output instead if you
1506 # want this to happen only when the pipe fails to complete normally.
1507
1508 address_pipe:
1509   driver = pipe
1510   current_directory = ${home}
1511   environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1512                  EXT=${substr_1:${local_part_suffix}}:\
1513                  LOCAL=${local_part}${local_part_suffix}:\
1514                  RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1515   return_output
1516   return_path_add
1517
1518 # This transport is used for handling file addresses generated by alias
1519 # or .forward files. It has a conventional name, since it is not actually
1520 # mentioned elsewhere in this configuration file.
1521
1522 address_file:
1523   driver = appendfile
1524   return_path_add
1525
1526 address_file_group:
1527   driver = appendfile
1528   return_path_add
1529   mode = 0660
1530   directory_mode = 0770
1531   mode_fail_narrower = false
1532
1533 # This transport is used for handling file addresses generated by alias
1534 # or .forward files if the path ends in "/", which causes it to be treated
1535 # as a directory name rather than a file name. Each message is then delivered
1536 # to a unique file in the directory. If instead you want all such deliveries to
1537 # be in the "maildir" format that is used by some other mail software,
1538 # uncomment the final option below. If this is done, the directory specified
1539 # in the .forward or alias file is the base maildir directory.
1540 #
1541 # Should you want to be able to specify either maildir or non-maildir
1542 # directory-style deliveries, then you must set up yet another transport,
1543 # called address_directory2. This is used if the path ends in "//" so should
1544 # be the one used for maildir, as the double slash suggests another level
1545 # of directory. In the absence of address_directory2, paths ending in //
1546 # are passed to address_directory.
1547
1548 address_directory:
1549   driver = appendfile
1550   check_string =
1551   maildir_format
1552   message_prefix = ""
1553   message_suffix = ""
1554   return_path_add
1555
1556 # This transport is used for handling autoreplies generated by the filtering
1557 # option of the forwardfile director. It has a conventional name, since it
1558 # is not actually mentioned elsewhere in this configuration file.
1559 address_reply:
1560   driver = autoreply
1561
1562 # This transport is used for delivering messages over SMTP connections.
1563
1564 remote_smtp:
1565   driver = smtp
1566   connect_timeout = 1m
1567   delay_after_cutoff = false
1568   tls_certificate = /etc/exim4/ssl/thishost.crt
1569   tls_privatekey = /etc/exim4/ssl/thishost.key
1570
1571 <%=
1572 out = ""
1573 if not scope.lookupvar('site::nodeinfo')['smarthost'].empty?
1574 out = '
1575 remote_smtp_smarthost:
1576   debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
1577   driver = smtp
1578   delay_after_cutoff = false
1579   port = '
1580   out += scope.lookupvar('site::nodeinfo')['smarthost_port'].to_s + "\n"
1581   out += '  tls_tempfail_tryclear = false
1582   hosts_require_tls = ' + scope.lookupvar('site::nodeinfo')['smarthost'] + '
1583   tls_certificate = /etc/exim4/ssl/thishost.crt
1584   tls_privatekey = /etc/exim4/ssl/thishost.key
1585 '
1586 end
1587 out
1588 %>
1589 # Send the message to procmail
1590 procmail_pipe:
1591   driver = pipe
1592   command = /usr/bin/procmail -a ${substr_1:${local_part_suffix}}
1593   return_path_add
1594   user = ${local_part}
1595
1596 bsmtp:
1597   driver = appendfile
1598   batch_max = 100
1599   file = ${host}
1600   message_prefix =
1601   message_suffix =
1602   use_bsmtp
1603   user = ${extract{user}{\
1604                    ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1605                      {$value}fail}\
1606                    }}
1607
1608 <%- if scope.lookupvar('site::nodeinfo')['bugsmaster'] or scope.lookupvar('site::nodeinfo')['bugsmx'] -%>
1609 bugs_pipe:
1610   driver = pipe
1611   command = /org/bugs.debian.org/mail/run-procmail
1612   environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1613                  EXT=${substr_1:${local_part_suffix}}:\
1614                  LOCAL=${local_part}${local_part_suffix}:\
1615                  RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1616   return_path_add
1617   return_output
1618   user = debbugs
1619
1620 <%- end -%>
1621 <%- if scope.lookupvar('site::nodeinfo')['rtmaster'] -%>
1622 rt_pipe:
1623   debug_print = "T: rt_pipe for $local_part${local_part_suffix}@$domain"
1624   driver = pipe
1625   return_fail_output
1626   environment = EXTENSION=${substr_1:${local_part_suffix}}
1627   allow_commands = /usr/bin/rt-mailgate
1628
1629 <%- end -%>
1630
1631 ######################################################################
1632 #                      RETRY CONFIGURATION                           #
1633 ######################################################################
1634
1635 # This single retry rule applies to all domains and all errors. It specifies
1636 # retries every 15 minutes for 2 hours, then increasing retry intervals,
1637 # starting at 2 hours and increasing each time by a factor of 1.5, up to 16
1638 # hours, then retries every 8 hours until 4 days have passed since the first
1639 # failed delivery.
1640
1641 # Domain               Error       Retries
1642 # ------               -----       -------
1643
1644
1645 begin retry
1646
1647 debian.org             *           F,2h,10m; G,16h,2h,1.5; F,14d,8h
1648 *                      * senders=: F,2h,10m
1649 *                      rcpt_4xx    F,2h,5m;  F,4h,10m; F,4d,15m
1650 *                      *           F,2h,15m; G,16h,2h,1.5; F,4d,8h
1651
1652 # End of Exim 4 configuration