2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
6 # This is the main exim4 configuration file based on the 28.08.05 version by
9 # The configuration file uses a set of rules to generate an
10 # acceptable mail environment for debian.org machines. It deviates
11 # considerably from what could be considered a standard exim configuration.
13 # This configuration file brings in the necessary information from
14 # other databases stored in /etc/exim/ and the files distributed by ud-ldap
16 # This file is independent of the local host, it should not be changed
17 # per machine. primary_hostname is used in all places that require per-host
20 # The configuration files in /etc/exim are as follows:
21 # locals - This is a list of domains that are considered local. A local
22 # domain is essential one that deliveries to /var/mail
23 # will be attempted. The users available for local delivery
24 # comes from /etc/passwd and /etc/aliases. Wildcards are not
26 # virtualdomains - This is a list of all virtual domains. A virtual domain
27 # is much like a local domain, execpt that the delivery location
28 # and allowed set of users is controlled by a virtual domain
29 # alias file and not /etc/passwd. Wildcards are permitted
30 # relayhosts - Hostnames that can send any arbitarily addressed mail to
31 # us. This is primarily only usefull for emergancy 'queue
32 # flushing' operations, but should be populated with a list
33 # of trusted machines. Wildcards are not permitted
34 # bsmtp_domains - Domains that we deliver locally via bsmtp
35 <%- if nodeinfo['mailrelay'] -%>
36 # mailhubdomains - Domains for which we are the MX, but the mail is relayed
37 # elsewhere. This is designed for use with small volume or
38 # restricted machines that need to use a smarthost for mail
39 # traffic. We will relay for them based on ssl cert validation
40 # but we need to teach exim how to route the mail to them. This is
44 # Exim's wildcard mechanism is a bit odd in that to say "any address in
45 # debian.org including debian.org" you must use two patterns,
48 # Also you can only place a * before a . and as the first char in a string.
49 # Wildcards always match last so they may be used as a catchall.
51 # Further details can be found in each of the files.
53 # Usefull exim commands:
54 # exim4 -qf - Try sending all messages right now, including frozen ones
55 # exim4 -bt foo@blah - Write what exim would do if it saw the address
56 # Great for testing virtual domains and forward files
58 # Special Features for users:
59 # .forward-foo - is understood as an extension address for bar-foo@cow.com
60 # .forward-default - is understood to be a catch all for bar-*@cow.com
61 # .procmailrc - with no .forward file invokes procmail for delivery
64 # For virtual domains the first lookup is done against a linear text
65 # database called 'aliases', then .forward files are consulted. Exim
66 # filtering is available for these .forward files only. .forward-default
67 # is the universal catch all for everything not handled.
69 # Heuristic check (none bad enough to cause a hard reject, but in aggregate
70 # will trigger things like rcpt to rate limiting or possibly a reject if
71 # enough hits are triggered.
73 # value is stored in acl_c_scr
75 ######################################################################
76 # MAIN CONFIGURATION SETTINGS #
77 ######################################################################
79 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
80 perl_startup = do '/etc/exim4/exim_surbl.pl'
83 # These options specify the Access Control Lists (ACLs) that
84 # are used for incoming SMTP messages - after the RCPT and DATA
85 # commands, respectively.
87 acl_smtp_helo = check_helo
88 acl_smtp_rcpt = ${if ={$interface_port}{587} {check_submission}{check_recipient}}
89 acl_smtp_data = check_message
90 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
91 acl_smtp_mime = acl_check_mime
93 acl_smtp_predata = acl_check_predata
95 # accept domain literal syntax in e-mail addresses. To actually make use of
96 # this a router is also required
97 allow_domain_literals = true
99 # This setting defines a named domain list called
100 # local_domains. It will be referenced
101 # later on by the syntax "+local_domains".
102 # Other domain and host lists may follow.
103 # @ is the local FQDN, @[] matches the IP adress of any local interface.
105 domainlist local_domains = @ : \
108 ${if exists {/etc/exim4/locals}{lsearch;/etc/exim4/locals}}
110 domainlist virtual_domains = partial-lsearch;/etc/exim4/virtualdomains
112 domainlist submission_domains = ${if exists {/etc/exim4/submission-domains}{/etc/exim4/submission-domains}{}}
114 domainlist bsmtp_domains = ${if exists {/etc/exim4/bsmtp}{partial-lsearch;/etc/exim4/bsmtp}{}}
116 domainlist handled_domains = +local_domains : +virtual_domains : +bsmtp_domains
118 localpartlist local_only_users = lsearch;/etc/exim4/localusers
120 localpartlist postmasterish = postmaster : abuse : hostmaster
122 hostlist debianhosts = <; ; 127.0.0.1 ; ::1 ; /var/lib/misc/thishost/debianhosts
124 hostlist reservedaddrs = <%= nodeinfo['reservedaddrs'] %>
126 <%- if nodeinfo['mailrelay'] -%>
127 # Domains we relay for; that is domains that aren't considered local but we
128 # accept mail for them.
129 domainlist mailhubdomains = lsearch;/etc/exim4/manualroute
132 <%- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true" -%>
133 tls_certificate = /etc/exim4/ssl/thishost.crt
134 tls_privatekey = /etc/exim4/ssl/thishost.key
135 tls_try_verify_hosts = *
136 tls_verify_certificates = /etc/exim4/ssl/ca.crt
137 tls_crl = /etc/exim4/ssl/ca.crl
140 # The setting below causes Exim to do a reverse DNS lookup on all incoming
141 # IP calls, in order to get the true host name. If you feel this is too
142 # expensive, you can specify the networks for which a lookup is done, or
143 # remove the setting entirely.
145 # dns_ipv4_lookup = !localhost (disabled upon sgrans request, zobel, 2010-03-16)
147 # If this option is set, then any process that is running as one of the
148 # listed users may pass a message to Exim and specify the sender's
149 # address using the "-f" command line option, without Exim's adding a
152 untrusted_set_sender = *
154 # Some operating systems use the "gecos" field in the system password file
155 # to hold other information in addition to users' real names. Exim looks up
156 # this field when it is creating "sender" and "from" headers. If these options
157 # are set, exim uses "gecos_pattern" to parse the gecos field, and then
158 # expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
161 gecos_pattern = ^([^,:]*)
164 # This tells exim to immediately discard error messages (ie double bounces).
165 ignore_bounce_errors_after = 0s
167 timeout_frozen_after=14d
169 message_size_limit = 100M
171 smtp_accept_max_per_host = ${if match_ip {$sender_host_address}{+debianhosts}{0}{7}}
172 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
173 smtp_accept_max = 300
174 smtp_accept_queue = 200
175 smtp_accept_queue_per_connection = 50
176 smtp_accept_reserve = 25
179 smtp_accept_queue = 20
180 smtp_accept_queue_per_connection = 10
181 smtp_accept_reserve = 5
183 smtp_reserve_hosts = +debianhosts
185 split_spool_directory = true
186 check_spool_inodes = 200
187 check_spool_space = 20M
191 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
192 message_body_visible = 5000
194 deliver_queue_load_max = 50
196 smtp_load_reserve = 20
199 deliver_queue_load_max = 10
202 queue_list_requires_admin = false
204 <%- if has_variable?("clamd") && clamd == "true" -%>
205 av_scanner = clamd:/var/run/clamav/clamd.ctl
210 out = "daemon_smtp_ports = "
213 if nodeinfo['bugsmaster'] or nodeinfo['bugsmx']
217 if not nodeinfo['mail_port'].to_s.empty?
218 ports << nodeinfo['mail_port']
221 if nodeinfo['mailrelay']
222 ports << nodeinfo['smarthost_port']
225 out += ports.uniq.sort.join(" : ")
230 remote_sort_domains = *.debian.org:*.debian.net
232 pipelining_advertise_hosts = !*
233 <%- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true" -%>
234 tls_advertise_hosts = *
236 smtp_enforce_sync = true
238 log_selector = +tls_cipher +tls_peerdn +queue_time +deliver_time +smtp_connection +smtp_incomplete_transaction +smtp_confirmation
240 received_header_text = Received: ${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
241 {${if def:sender_ident {from ${quote_local_part:$sender_ident} }}${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
242 ${if and {{eq {$tls_certificate_verified}{1}}{def:tls_peerdn}}{from $tls_peerdn (verified)\n\t}}\
243 by $primary_hostname ${if def:received_protocol {with $received_protocol}} ${if def:tls_cipher {($tls_cipher)\n\t}}\
244 (Exim $version_number)\n\t\
245 ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}\
246 id $message_exim_id${if def:received_for {\n\tfor $received_for}}
250 VDOMAINDATA = ${lookup{$domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
251 WHITELIST = ${if match_domain{$domain}{+virtual_domains}\
252 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}\
253 {${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}{$value}{}}}{}}}\
254 {/etc/exim4/whitelist} } : \
255 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-whitelist}{$value}{}}
256 GREYLIST_LOCAL_PARTS = ${if match_domain{$domain}{+virtual_domains}\
257 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
258 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
259 {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}}}} : \
260 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}
261 RT_QUEUE_MAP = /srv/rt.debian.org/mail/rt_queue_map
263 ######################################################################
264 # ACL CONFIGURATION #
265 ######################################################################
269 # There are a few profiles that don't want much smtp time checking of
270 # mail. It's easier to track them in one place
272 accept condition = ${if eq {$acl_m_prf}{PopconMail}}
273 accept condition = ${if eq {$acl_m_prf}{BugsMail}}
277 # This is a bad hack to reset the variable, by defining it be something
280 warn set acl_m_rprf = $acl_m_undefined
282 warn recipients = survey@popcon.debian.org
283 set acl_m_rprf = PopconMail
285 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
287 warn local_parts = +local_only_users
288 domains = +local_domains
289 hosts = !+debianhosts
290 set acl_m_rprf = localonly
292 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
294 <%- if nodeinfo['rtmaster'] -%>
295 warn domains = rt.debian.org
296 set acl_m_rprf = RTMail
298 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
301 <%- if nodeinfo['bugsmx'] -%>
302 warn domains = bugs.debian.org
303 set acl_m_rprf = BugsMail
305 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
308 <%- if nodeinfo['packagesmaster'] -%>
309 warn domains = packages.debian.org
310 set acl_m_rprf = PackagesMail
312 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
315 <%- if nodeinfo['packagesqamaster'] -%>
316 warn recipients = owner@packages.qa.debian.org : postmaster@packages.qa.debian.org
317 set acl_m_rprf = PTSOwner
319 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
322 domains = packages.qa.debian.org
323 condition = ${if match{$local_part}{\N^bounces+\N}}
324 set acl_m_rprf = PTSListBounce
326 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
328 warn domains = packages.qa.debian.org
329 set acl_m_rprf = PTSMail
331 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
334 warn recipients = change@db.debian.org : changes@db.debian.org : chpasswd@db.debian.org : ping@db.debian.org : recommend@nm.debian.org
335 set acl_m_rprf = DBSignedMail
337 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
339 warn domains = +virtual_domains
340 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
341 condition = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{markup}}
342 set acl_m_rprf = markup
344 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
346 warn domains = +virtual_domains
347 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
348 condition = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{blackhole}}
349 set acl_m_rprf = blackhole
351 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
353 warn domains = +virtual_domains
354 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
355 condition = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{markup}}
356 set acl_m_rprf = markup
358 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
360 warn domains = +virtual_domains
361 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
362 condition = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{blackhole}}
363 set acl_m_rprf = blackhole
365 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
367 warn domains = +local_domains
368 condition = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{markup}}
369 set acl_m_rprf = markup
371 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
373 warn domains = +local_domains
374 condition = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{blackhole}}
375 set acl_m_rprf = blackhole
377 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
379 warn set acl_m_rprf = normal
385 warn set acl_c_scr = 0
387 <%- if nodeinfo['mailrelay'] -%>
388 accept verify = certificate
391 <%- if nodeinfo['smarthost'].empty? -%>
392 # These are in HELO acl so that they are only run once. They increment a counter,
393 # so we don't want it to increment per rcpt to.
395 warn dnslists = list.dnswl.org&0.0.0.3
396 log_message = Hit on list.dnswl.org for $sender_host_address
397 set acl_c_scr = ${eval:$acl_c_scr-30}
399 warn dnslists = list.dnswl.org&0.0.0.2
400 log_message = Hit on list.dnswl.org for $sender_host_address
401 set acl_c_scr = ${eval:$acl_c_scr-20}
403 warn dnslists = list.dnswl.org
404 log_message = Hit on list.dnswl.org for $sender_host_address
405 set acl_c_scr = ${eval:$acl_c_scr-10}
407 warn condition = ${if isip {$sender_helo_name}{true}{false}}
408 log_message = remote host used IP address in HELO/EHLO greeting
409 set acl_c_scr = ${eval:$acl_c_scr+20}
411 warn !hosts = +debianhosts
412 condition = ${if eq{$host_lookup_failed}{1}}
413 set acl_c_scr = ${eval:$acl_c_scr+20}
415 warn !hosts = +debianhosts
416 condition = ${if eq{$host_lookup_failed}{0}}
417 condition = ${if match{$sender_host_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
418 set acl_c_scr = ${eval:$acl_c_scr+20}
420 warn !hosts = +debianhosts
421 condition = ${if match{$sender_helo_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
422 set acl_c_scr = ${eval:$acl_c_scr+20}
424 warn !hosts = +debianhosts
425 dnslists = dul.dnsbl.sorbs.net
426 set acl_c_scr = ${eval:$acl_c_scr+15}
428 # If the sender's helo name is empty, the message will be rejected later
429 # because the helo is empty. If the rDNS lookup failed, we are already
430 # going to greylist them, so no sense worrying about it here. Finally,
431 # if rDNS does not match helo name (both lower cased first), greylist.
433 warn !hosts = +debianhosts
434 condition = ${if eq {$host_lookup_failed}{1}{no}{yes}}
435 condition = ${if def:sender_helo_name {yes}{no}}
436 condition = ${if eq {${lc:$sender_helo_name}}{${lc:$sender_host_name}}{no}{yes}}
437 log_message = HELO doesn't match rDNS
438 set acl_c_scr = ${eval:$acl_c_scr+8}
441 # matches 098325879 - looks fishy
443 warn condition = ${if and { \
444 { !match{$sender_helo_name}{\N^\[.+\]$\N} } \
445 { !match{$sender_helo_name}{\N^(?i)((?=[^-])[a-z0-9-]*[a-z0-9]\.)+[a-z]{2,6}$\N} } \
448 log_message = non-FQDN HELO
449 set acl_c_scr = ${eval:$acl_c_scr+12}
451 # Matches DOMAIN99.com - looks bad
453 warn condition = ${if match {$sender_helo_name}{\N^[A-Z]+[A-Z0-9\-]+\.[A-Za-z0-9]+$\N}}
454 log_message = SHOUTING HELO
455 set acl_c_scr = ${eval:$acl_c_scr+7}
457 # Random HELO (run of 7 consonants) (constructed by viruses). We purposefully
458 # skip matching on machines named .*smtp.*, since that's 4 already. This is a fairly
459 # naive test, so it's not worth much
461 warn condition = ${if match {${lc:$sender_helo_name}}{smtp}{no}{yes}}
462 condition = ${if match {${lc:$sender_helo_name}}{\N^[a-z0-9]+\.[a-z]+$\N}}
463 condition = ${if match {${lc:$sender_helo_name}}{\N.*[bcdfghjklmnpqrstvwxz]{7,}.*\.[a-z]+$\N}}
464 log_message = random HELO
465 set acl_c_scr = ${eval:$acl_c_scr+5}
468 drop !hosts = +debianhosts
469 log_message = mail from non-d.o host
470 message = Interesting. I doubt that should have happened.
473 # Implicit, but simpler to just say it
476 #!!# ACL that is used after the RCPT command on the submission port
479 # Accept if the source is local SMTP (i.e. not over TCP/IP).
480 # We do this by testing for an empty sending host field.
481 accept hosts = +debianhosts
483 <%- if nodeinfo['mailrelay'] -%>
484 accept verify = certificate
487 # Defer after too many bad RCPT TO's. Legit MTAs will retry later.
488 # This is a rough pass at preventing addres harvesting or other mail blasts.
490 defer log_message = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
491 message = Too many bad recipients, try again later
492 condition = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
495 ratelimit = 5 / 60m / per_rcpt / $sender_host_address
496 !hosts = +debianhosts
497 message = sorry, only 5 reports per hour for submission
499 accept domains = +local_domains
504 <%- if nodeinfo['mailrelay'] -%>
505 accept domains = +mailhubdomains
507 verify = recipient/callout=30s,defer_ok,use_sender,no_cache
510 accept domains = +submission_domains
514 deny message = relay not permitted
516 #!!# ACL that is used after the RCPT command
519 <%- if nodeinfo['mailrelay'] -%>
520 accept verify = certificate
523 accept hosts = <; ::1 ; 127.0.0.1 ; @
524 warn acl = acl_getprofile
525 condition = ${if eq{$acl_m_prf}{}}
526 set acl_m_prf = $acl_m_rprf
528 defer condition = ${if eq{$acl_m_prf}{$acl_m_rprf}{no}{yes}}
529 message = Different profile, please retry
530 log_message = Only one profile at a time, please
532 # Defer after too many bad RCPT TO's. Legit MTAs will retry later.
533 # This is a rough pass at preventing addres harvesting or other mail blasts.
535 defer log_message = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
536 !acl = acl_spamlovers
537 message = Too many bad recipients, try again later
538 !hosts = +debianhosts
539 condition = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
541 # Dump spambots that are so stupid they say helo as our IP address
543 drop !hosts = +debianhosts
544 !acl = acl_spamlovers
545 condition = ${if eq {$sender_helo_name}{$interface_address}{yes}{no}}
546 message = HELO mismatch Forged HELO for ($sender_helo_name)
548 # Also for spambots that say helo as us or one of our domains
550 drop !hosts = +debianhosts
551 !acl = acl_spamlovers
552 condition = ${if match_domain{$sender_helo_name}{$primary_hostname:+handled_domains}}
553 condition = ${if !match{$sender_host_name}{${rxquote:$sender_helo_name}\N$\N}}
554 message = HELO mismatch Forged HELO for ($sender_helo_name)
556 # This logic gives you a list of commonly forged domains in helo to reject against
558 warn set acl_m_frg = ${lookup{$sender_helo_name} \
559 nwildlsearch{/etc/exim4/helo-check} \
560 {${if eq{$value}{}{$sender_helo_name}{$value}}}{}}
562 # This is a failsafe in case DNS fails - we defer instead of hard reject if they
563 # say helo as a name in the list but we can't look them up
565 defer !hosts = +debianhosts
566 !acl = acl_spamlovers
567 condition = ${if eq{$acl_m_frg}{}{no}{yes}}
568 condition = ${if eq{$sender_host_name}{}{yes}{no}}
569 condition = ${if eq{$host_lookup_failed}{1}{no}{yes}}
570 message = Access temporarily denied. Resolve failed PTR for $sender_host_address
572 # If DNS works, go ahead and reject them
574 drop !hosts = +debianhosts
575 !acl = acl_spamlovers
576 condition = ${if and { {!eq{$acl_m_frg}{}}{!match{$sender_host_name}{${rxquote:$acl_m_frg}\N$\N}}}{yes}{no}}
577 message = HELO mismatch Forged HELO for ($sender_helo_name)
579 # disabled accounts don't even get local mail.
580 deny domains = +virtual_domains
581 local_parts = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}\
582 {lsearch;${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}\
584 message = ${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}{$value}}
586 deny local_parts = lsearch;/var/lib/misc/$primary_hostname/mail-disable
587 domains = +local_domains
588 message = ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-disable}{$value}}
590 deny domains = +virtual_domains
591 local_parts = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
592 {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
594 hosts = !+debianhosts
595 message = mail for <$local_part@$domain> only accepted from debian.org machines
597 # Accept if the source is local SMTP (i.e. not over TCP/IP).
598 # We do this by testing for an empty sending host field.
601 deny domains = +handled_domains
602 local_parts = ^[.] : ^.*[@%!/|]
604 deny domains = !+handled_domains
605 local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
607 # forwards mail to @d.o address, even if it's a bounce from master, no reply
608 # from source address; rejecting all mail now.
609 deny recipients = mendoza@debian.org
610 hosts = 65.110.39.147 : 64.39.31.15
611 message = <mendoza@kenny.linuxsis.net> cannot forward here while mailer-daemon mail is not caught
613 deny condition = ${lookup{$sender_address_local_part}lsearch{/etc/exim4/localusers}{true}}
614 sender_domains= +local_domains
615 hosts = !+debianhosts
616 message = mail from <$sender_address> not allowed externally
618 deny sender_domains= +virtual_domains
619 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localusers}}}}
620 condition = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/localusers}}}{true}}
621 hosts = !+debianhosts
622 message = mail from <$sender_address> not allowed externally
624 deny condition = ${if match_domain{$sender_address_domain}{+virtual_domains}{1}{0}}
625 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
626 condition = ${if match_local_part {$sender_address_local_part}{${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
627 message = no mail should ever come from <$sender_address>
629 warn condition = ${if eq{$acl_m_prf}{localonly}}
630 set acl_m_lrc = ${if eq{$acl_m_lrc}{}{$local_part@$domain}{$acl_m_lrc, $local_part@$domain}}
632 <%- if nodeinfo['packagesmaster'] -%>
633 warn condition = ${if eq {$acl_m_prf}{PackagesMail}}
634 condition = ${if eq {$sender_address}{$local_part@$domain}}
635 message = X-Packages-FromTo-Same: yes
638 deny condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
641 defer !hosts = +debianhosts
642 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
643 condition = ${if >{${eval:$acl_c_scr+0}}{0}}
644 ratelimit = 10 / 60m / per_rcpt / $sender_host_address
645 message = slow down (no reverse dns, mismatched ehlo, dialup, or in blacklists)
647 <%- if has_variable?("policydweight") && policydweight == "true" -%>
648 # Check with policyd-weight - this only works with a version after etch's,
649 # sadly. etch's version attempts to hold the socket open, since that's what
650 # postfix expects. Exim, on the other hand, expects the remote side to close
651 # the socket when it's finished sending data, so it see each transaction as
652 # an incomplete read. I'm sure there's a way we could force exim to do
653 # something sick and clever to force either the interpretation or the socket
654 # closure, but I'm fairly sure it's now worth it, since the backport of
655 # policyd-weight is trivial.
656 warn !hosts = +debianhosts
657 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
658 set acl_m_pw = ${readsocket{inet:127.0.0.1:12525}\
659 {request=smtpd_access_policy\n\
660 protocol_state=RCPT\n\
661 protocol_name=${uc:$received_protocol}\n\
662 helo_name=$sender_helo_name\n\
663 queue_id=$message_exim_id\n\
664 sender=$sender_address\n\
665 recipient=$local_part@$domain\n\
666 recipient_count=$rcpt_count\n\
667 client_address=$sender_host_address\n\
668 client_name=$sender_host_name\n\
669 reverse_client_name=$sender_host_name\n\
670 instance=$sender_host_address.$sender_address.$sender_helo_name\n\n}\
671 {20s}{\n}{socket failure}}
673 # Defer on socket error
674 defer !hosts = +debianhosts
675 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
676 condition = ${if eq{$acl_m_pw}{socket failure}{yes}{no}}
677 message = Cannot connect to policyd-weight. Please try again later.
679 # Set proposed action to $acl_m_act and message to $acl_m_mes
680 warn !hosts = +debianhosts
681 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
682 set acl_m_mes = ${extract{action}{$acl_m_pw}}
683 set acl_m_act = ${sg{$acl_m_pw}{\Naction=[^ ]+ (.*)\n\n\N}{\$1}}
685 # Add X-policyd-weight header line to message
686 warn !hosts = +debianhosts
687 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
689 condition = ${if eq{$acl_m_act}{PREPEND}{yes}{no}}
691 # Write log message, if policyd-weight can't run checks
692 warn !hosts = +debianhosts
693 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
694 log_message = policyd-weight message: $acl_m_mes
695 condition = ${if eq{$acl_m_act}{DUNNO}{yes}{no}}
697 # Deny mails which policyd-weight thinks are spam
698 deny !hosts = +debianhosts
699 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
700 message = policyd-weight said: $acl_m_mes
701 condition = ${if eq{$acl_m_act}{550}{yes}{no}}
703 # Defer messages when policyd-weight suggests so.
704 defer !hosts = +debianhosts
705 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
706 message = policyd-weight said: $acl_m_mes
707 condition = ${if eq{$acl_m_act}{450}{yes}{no}}
710 <%- if nodeinfo['rtmaster'] -%>
711 warn condition = ${if eq{$acl_m_prf}{RTMail}}
712 set acl_m12 = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}} {RTMailRecipientHasSubaddress}}}}
715 <%- if has_variable?("greylistd") && greylistd == "true" -%>
717 message = $sender_host_address is not yet authorized to deliver mail from <$sender_address> to <$local_part@$domain>.
718 log_message = greylisted.
719 local_parts = ${if match_domain{$domain}{+virtual_domains}\
720 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
721 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
722 {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}} : \
723 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}}}
725 !hosts = : +debianhosts : WHITELIST : \
726 ${if exists {/etc/greylistd/whitelist-hosts}\
727 {/etc/greylistd/whitelist-hosts}{}} : \
728 ${if exists {/var/lib/greylistd/whitelist-hosts}\
729 {/var/lib/greylistd/whitelist-hosts}{}}
730 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
732 domains = +handled_domains
733 condition = ${readsocket{/var/run/greylistd/socket}\
735 $sender_host_address \
737 $local_part@$domain}\
740 <%- elsif has_variable?("postgrey") && postgrey == "true" -%>
741 # next three are greylisting, inspired by http://www.bebt.de/blog/debian/archives/2006/07/30/T06_12_27/index.html
742 # this adds acl_m_grey if there isn't one (so unique per message)
745 !hosts = : +debianhosts : WHITELIST
746 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
747 condition = ${if def:acl_m_grey {no}{yes}}
748 set acl_m_grey = $pid.$tod_epoch.$sender_host_port
750 # and defers the message if postgrey thinks it should be defered ...
753 !hosts = : +debianhosts : WHITELIST
754 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
756 domains = +handled_domains
757 local_parts = GREYLIST_LOCAL_PARTS
758 set acl_m_pgr = request=smtpd_access_policy\n\
759 protocol_state=RCPT\n\
760 protocol_name=${uc:$received_protocol}\n\
761 instance=${acl_m_grey}\n\
762 helo_name=${sender_helo_name}\n\
763 client_address=${substr_-3:${mask:$sender_host_address/24}}\n\
764 client_name=${sender_host_name}\n\
765 sender=${sender_address}\n\
766 recipient=$local_part@$domain\n\n
767 set acl_m_pgr = ${sg{\
768 ${readsocket{/var/run/postgrey/socket}{$acl_m_pgr}\
769 {5s}{}{action=DUNNO}}\
771 message = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
772 log_message = greylisted.
773 condition = ${if eq{${uc:${substr{0}{5}{$acl_m_pgr}}}}{DEFER}}
775 # ... or adds a header with information about how long the delay was
778 !hosts = : +debianhosts : WHITELIST
779 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
781 domains = +handled_domains
782 local_parts = GREYLIST_LOCAL_PARTS
783 condition = ${if eq{${uc:${substr_0_7:$acl_m_pgr}}}{PREPEND}}
784 message = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
787 accept local_parts = +postmasterish
788 domains = +handled_domains
790 deny hosts = ${if exists{/etc/exim4/host_blacklist}{/etc/exim4/host_blacklist}{}}
791 message = I'm terribly sorry, but it seems you have been blacklisted
792 log_message = blacklisted IP
794 deny log_message = <$sender_address> is blacklisted
795 senders = ${if exists{/etc/exim4/blacklist}{/etc/exim4/blacklist}{}}
796 message = We have blacklisted <$sender_address>. Please stop mailing us
798 <%- if nodeinfo['smarthost'].empty? -%>
799 deny message = host $sender_host_address is listed in $dnslist_domain; see $dnslist_text
800 dnslists = ${if match_domain{$domain}{+virtual_domains}\
801 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}\
802 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}{$value}{}}}{}}}\
803 {${lookup{$local_part}lsearch{/etc/exim4/rbllist}{$value}{}}}} : \
804 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rbl}{$value}{}}
805 domains = +handled_domains
806 !hosts = +debianhosts : WHITELIST
809 deny message = domain $sender_address_domain is listed in $dnslist_domain; see $dnslist_text
810 dnslists = ${if match_domain{$domain}{+virtual_domains}\
811 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}\
812 {${expand:${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}{$value}{}}}}{}}}\
813 {${expand:${lookup{$local_part}lsearch{/etc/exim4/rhsbllist}{$value}{}}}}} : \
814 ${expand:${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rhsbl}{$value}{}}}
815 domains = +handled_domains
816 !hosts = +debianhosts : WHITELIST
818 <%- if nodeinfo['smarthost'].empty? -%>
819 deny domains = +handled_domains
820 local_parts = ${if match_domain{$domain}{+virtual_domains}\
821 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}\
822 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}{$local_part}{}}}{}}}\
823 {${lookup{$local_part}lsearch{/etc/exim4/callout_users}{$local_part}{}}}} : \
824 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-callout}{$local_part}{}}
825 !hosts = +debianhosts : WHITELIST
826 !verify = sender/callout=90s,maxwait=300s
829 <%- if nodeinfo['mailrelay'] -%>
830 accept domains = +mailhubdomains
832 verify = recipient/callout=30s,defer_ok,use_sender,no_cache
835 accept domains = +handled_domains
837 verify = recipient/defer_ok
839 accept hosts = +debianhosts
841 accept authenticated = *
843 deny message = relay not permitted
845 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
848 discard condition = ${if <{$message_size}{256000}}
849 condition = ${if eq {$acl_m_prf}{blackhole}}
850 set acl_m_srb = ${perl{surblspamcheck}}
851 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
852 log_message = discarded surbl message for $recipients
854 deny condition = ${if <{$message_size}{256000}}
855 condition = ${if eq {$acl_m_prf}{markup}{no}{yes}}
856 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
857 set acl_m_srb = ${perl{surblspamcheck}}
858 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
859 log_message = $acl_m_srb
862 warn condition = ${if <{$message_size}{256000}}
863 condition = ${if eq {$acl_m_prf}{markup}}
864 set acl_m_srb = ${perl{surblspamcheck}}
865 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
866 message = X-Surbl-Hit: $primary_hostname: $acl_m_srb
872 deny condition = ${if eq{$acl_m_prf}{localonly}}
873 message = mail for $acl_m_lrc is only accepted internally
878 #!!# ACL that is used after the DATA command
880 <%- if nodeinfo['rtmaster'] -%>
881 deny condition = ${if eq {$acl_m_prf}{RTMail}}
882 condition = ${if and{{!match {${lc:$rh_Subject:}} {debian rt}} \
883 {!match {${lc:$rh_Subject:]}} {\N\[rt.debian.org \N}} \
884 {!match {$acl_m12}{RTMailRecipientHasSubaddress}}}}
885 message = messages to the Request Tracker system require a subject tag or a subaddress
888 <%- if nodeinfo['packagesqamaster'] -%>
889 deny !hosts = +debianhosts : 217.196.43.134
890 condition = ${if eq {$acl_m_prf}{PTSMail}}
891 condition = ${if def:h_X-PTS-Approved:{false}{true}}
892 message = messages to the PTS require an X-PTS-Approved header
895 deny condition = ${if eq {$acl_m_prf}{DBSignedMail}}
896 condition = ${if and {{!match {$message_body}{PGP MESSAGE}} \
897 {!match {$message_body}{PGP SIGNED MESSAGE}} \
898 {!match {$message_body}{PGP SIGNATURE}} \
899 {!match {$header_content-type:}{multipart/signed}} \
900 {!match {$header_content-type:}{pgp}} \
903 message = Mail to this address needs to be PGP-signed
905 accept verify = certificate
907 deny condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
908 !verify = header_syntax
909 message = Invalid syntax in the header
911 # RFC 822 and 2822 say that headers must be ASCII. This kinda emulates
912 # postfix's strict_7bit_headers option, but only checks a few common problem
913 # headers, as there doesn't appear to be an easy way to check them all.
915 condition = ${if or {{match {$rh_Subject:}{[\200-\377]}}\
916 {match {$rh_To:}{[\200-\377]}}\
917 {match {$rh_From:}{[\200-\377]}}\
918 {match {$rh_Cc:}{[\200-\377]}}}{true}{false}}
919 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
920 message = improper use of 8-bit data in message header: message rejected
923 condition = ${if match {$rh_Subject:}{[^[:print:]]\{8\}}{true}{false}}
924 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
925 message = Your mailer is not RFC 2047 compliant: message rejected
927 <%- if has_variable?("clamd") && clamd == "true" -%>
928 discard condition = ${if eq {$acl_m_prf}{blackhole}}
931 log_message = discarded malware message for $recipients
933 deny condition = ${if eq {$acl_m_prf}{markup}{no}{yes}}
934 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
937 message = malware detected: $malware_name: message rejected
939 warn condition = ${if eq {$acl_m_prf}{markup}}
942 message = X-malware detected: $malware_name
945 <%- if nodeinfo.has_key?('heavy_exim') and nodeinfo['heavy_exim'] -%>
946 discard condition = ${if <{$message_size}{256000}}
947 condition = ${if eq {$acl_m_prf}{blackhole}}
948 set acl_m_srb = ${perl{surblspamcheck}}
949 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
950 log_message = discarded surbl message for $recipients
952 deny condition = ${if <{$message_size}{256000}}
953 condition = ${if eq {$acl_m_prf}{markup}{no}{yes}}
954 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
955 set acl_m_srb = ${perl{surblspamcheck}}
956 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
957 log_message = $acl_m_srb
960 warn condition = ${if <{$message_size}{256000}}
961 condition = ${if eq {$acl_m_prf}{markup}}
962 set acl_m_srb = ${perl{surblspamcheck}}
963 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
964 message = X-Surbl-Hit: $primary_hostname: $acl_m_srb
967 # Check header_sender except for survey@popcon.d.o
968 deny condition = ${if eq{$acl_m_prf}{PopconMail}{false}{true}}
969 !verify = header_sender
970 message = No valid sender found in the From:, Sender: and Reply-to: headers
972 <%- if nodeinfo['packagesmaster'] -%>
973 deny message = Congratulations, you scored $spam_score points.
974 log_message = spam: $spam_score points.
975 condition = ${if eq {$acl_m_prf}{PackagesMail}}
977 !verify = certificate
978 !hosts = +debianhosts
979 condition = ${if <{$message_size}{256000}}
980 spam = pkg_user : true
981 condition = ${if >{$spam_score_int}{59}}
988 ######################################################################
989 # REWRITE CONFIGURATION #
990 ######################################################################
996 \N^buildd_(.*)@franck\.debian\.org$\N buildd_$1@buildd.debian.org T
997 \N^buildd_(.*)@klecker\.debian\.org$\N buildd_$1@buildd.debian.org T
998 *@debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
999 *@people.debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1000 #*@${primary_hostname} "${if exists{/etc/exim4/email-addresses}{${lookup{$1}lsearch{/etc/exim4/email-addresses}{$value}fail}}fail}" fFs
1001 m68k@buildd.debian.org m68k-build@nocrew.org Ttrbc
1004 #!!#######################################################!!#
1005 #!!# Here follow routers created from the old routers, #!!#
1006 #!!# for handling non-local domains. #!!#
1007 #!!#######################################################!!#
1013 ######################################################################
1014 # ROUTERS CONFIGURATION #
1015 # Specifies how addresses are handled #
1016 ######################################################################
1017 # ORDER DOES MATTER #
1018 # An address is passed to each in turn until it is accepted. #
1019 ######################################################################
1021 <%- if nodeinfo['mailrelay'] -%>
1023 driver = manualroute
1024 domains = +mailhubdomains
1025 transport = remote_smtp
1026 route_data = ${lookup{$domain}lsearch{/etc/exim4/manualroute}}
1027 require_files = /etc/exim4/manualroute
1031 debug_print = "R: bsmtp for $local_part@$domain"
1032 driver = manualroute
1033 domains = +bsmtp_domains
1034 require_files = /etc/exim4/bsmtp
1035 route_list = * ${extract{file}{\
1036 ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1040 # This router routes to remote hosts over SMTP by explicit IP address,
1041 # given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
1042 # require this facility, which is why it is enabled by default in Exim.
1044 debug_print = "R: ipliteral for $local_part@$domain"
1046 domains = !+handled_domains
1047 transport = remote_smtp
1048 ignore_target_hosts = +reservedaddrs
1052 if not nodeinfo['smarthost'].empty?
1055 debug_print = "R: smarthost for $local_part@$domain"
1056 driver = manualroute
1057 domains = !+handled_domains
1058 transport = remote_smtp_smarthost
1059 route_list = * ' + nodeinfo['smarthost']
1060 if nodeinfo['smarthost'] == 'mailout.debian.org'
1064 host_find_failed = defer
1065 same_domain_copy_routing = yes
1072 # This router routes to remote hosts over SMTP using a DNS lookup.
1073 # Ignore reserved network responses, including localhost.
1075 debug_print = "R: dnslookup for $local_part@$domain"
1077 domains = !+handled_domains
1078 transport = remote_smtp
1079 ignore_target_hosts = +reservedaddrs
1083 debug_print = "R: postmasterish for $local_part@$domain"
1088 local_parts = +postmasterish
1089 domains = +handled_domains
1090 data = debian-admin@debian.org
1091 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1093 # This router handles aliasing using a traditional /etc/aliases file.
1094 # If any of your aliases expand to pipes or files, you will need to set
1095 # up a user and a group for these deliveries to run under. You can do
1096 # this by uncommenting the "user" option below (changing the user name
1097 # as appropriate) and adding a "group" option if necessary.
1100 debug_print = "R: system_aliases for $local_part@$domain"
1104 data = ${lookup{$local_part}lsearch*{/etc/aliases}}
1105 domains = +local_domains
1106 file_transport = address_file
1107 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1108 pipe_transport = address_pipe
1109 retry_use_local_part
1111 # This router handles forwarding using traditional .forward files.
1112 # It also allows mail filtering when a forward file starts with the
1113 # string "# Exim filter": to disable filtering, uncomment the "filter"
1114 # option. The check_ancestor option means that if the forward file
1115 # generates an address that is an ancestor of the current one, the
1116 # current one gets passed on instead. This covers the case where A is
1117 # aliased to B and B has a .forward file pointing to A.
1119 # For standard debian setup of one group per user, it is acceptable---normal
1120 # even---for .forward to be group writable. If you have everyone in one
1121 # group, you should comment out the "modemask" line. Without it, the exim
1122 # default of 022 will apply, which is probably what you want.
1125 debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1130 directory_transport = address_directory
1131 <%- if fqdn == "master.debian.org" -%>
1132 domains = +local_domains : debian.org
1134 domains = +local_domains
1136 # filter - I have disabled filtering to force users to use .forward-foo files
1137 # or procmail. This will make it easier to move mailers in the future
1139 # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1140 # also checks if the .forward-bar exists, if not then it uses
1141 # .forward-default instead.
1142 file = $home/.forward\
1143 ${if eq{}{$local_part_suffix}{}{\
1144 ${if exists {${home}/.forward${local_part_suffix}} \
1145 {${local_part_suffix}}{-default}}\
1148 file_transport = address_file
1149 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1150 local_part_suffix = -*
1151 local_part_suffix_optional
1153 pipe_transport = address_pipe
1154 reply_transport = address_reply
1155 require_files = $home
1156 router_home_directory = ${lookup passwd{$local_part}{${extract{5}{:}{$value}}}fail}
1159 # This is a senmailesque alias file lookup
1161 debug_print = "R: virt_aliases for $local_part@$domain"
1165 data = ${if exists{\
1166 ${extract{directory}{VDOMAINDATA}{${value}/aliases}}}\
1167 {${lookup{$local_part}lsearch*{\
1168 ${extract{directory}{VDOMAINDATA}{$value/aliases}}\
1170 directory_transport = address_directory
1171 domains = +virtual_domains
1172 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1173 cannot_route_message = Unknown user
1174 group = ${extract{group}{VDOMAINDATA}}
1175 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1176 pipe_transport = address_pipe
1177 qualify_preserve_domain
1178 retry_use_local_part
1179 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1180 transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1181 user = ${extract{user}{VDOMAINDATA}}
1184 debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1188 directory_transport = address_directory
1189 <%- if fqdn == "master.debian.org" -%>
1190 domains = +local_domains : debian.org
1192 domains = +local_domains
1194 # filter - I have disabled filtering to force users to use .forward-foo files
1195 # or procmail. This will make it easier to move mailers in the future
1197 # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1198 # also checks if the .forward-bar exists, if not then it uses
1199 # .forward-default instead.
1200 file = $home/.forward\
1201 ${if eq{}{$local_part_suffix}{}{\
1202 ${if exists {${home}/.forward${local_part_suffix}} \
1203 {${local_part_suffix}}{-default}}\
1206 file_transport = address_file
1207 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1208 local_part_suffix = -*
1209 local_part_suffix_optional
1211 pipe_transport = address_pipe
1212 reply_transport = address_reply
1213 require_files = $home
1216 # This delivers to procmail
1218 debug_print = "R: procmail for $local_part@$domain"
1221 <%- if fqdn == "master.debian.org" -%>
1222 domains = +local_domains : debian.org
1224 domains = +local_domains
1226 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1227 local_part_suffix = -*
1228 local_part_suffix_optional
1231 require_files = $local_part:$home/.procmailrc
1232 transport = procmail_pipe
1233 transport_current_directory = $home
1235 # This driver delivers to the LDAP generated alias file.
1237 debug_print = "R: ldap_aliases for $local_part@$domain"
1241 data = ${if exists{/var/lib/misc/$primary_hostname/user-forward.cdb}\
1242 {${lookup{$local_part}cdb\
1243 {/var/lib/misc/$primary_hostname/user-forward.cdb}}}}
1244 domains = +local_domains
1245 file_transport = address_file
1246 local_part_suffix = -*
1247 local_part_suffix_optional
1248 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1249 pipe_transport = address_pipe
1250 retry_use_local_part
1252 # This director matches local user mailboxes.
1254 debug_print = "R: localuser for $local_part@$domain"
1257 domains = +local_domains
1258 local_part_suffix = -*
1259 local_part_suffix_optional
1260 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1261 # Disable if the user has never logged in
1262 require_files = $home
1263 transport = local_delivery
1266 # Now we begin the Virtual Domain configuration
1267 # Everything before here should apply only to the local domains with a
1270 <%- if nodeinfo['packagesmaster'] -%>
1271 # This router delivers for packages.d.o
1273 debug_print = "R: packages for $local_part@$domain"
1275 file_transport = address_file
1276 pipe_transport = address_pipe
1277 domains = packages.debian.org
1278 require_files = /org/packages.debian.org/conf/maintainer
1279 data = ${lookup{$local_part}cdb{/org/packages.debian.org/conf/maintainer.cdb}}
1280 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1281 transport_home_directory = /org/packages.debian.org/mail
1282 transport_current_directory = /org/packages.debian.org/mail
1284 retry_use_local_part
1288 <%- if nodeinfo['rtmaster'] -%>
1289 # This router delivers for rt.d.o
1290 rt_force_new_verbose:
1291 debug_print = "R: rt for $local_part+new@$domain"
1293 domains = rt.debian.org
1294 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1295 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1296 local_part_suffix = +new
1297 pipe_transport = rt_pipe
1298 data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1299 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1301 # FIXME: figure out how to generalize this approach so that all of the following would work
1302 # - rt+NNNN@rt.debian.org : attach correspondence to ticket (verbose)
1303 # - rt+NNNN-quiesce@rt.debian.org : attach correspondence to ticket (quiesce)
1304 # - rt+NNNN-<action>@rt.debian.org : attach correspondence to ticket (some action)
1305 # requires modification to custom condition in 'scrips'
1306 rt_force_new_quiesce:
1307 debug_print = "R: rt for $local_part+new-quiesce@$domain"
1309 domains = rt.debian.org
1310 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1311 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1312 local_part_suffix = +new-quiesce
1313 pipe_transport = rt_pipe
1314 data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1315 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nX-RT-Mode: quiesce"
1318 debug_print = "R: rt for $local_part@$domain"
1320 domains = rt.debian.org
1321 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1322 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1323 local_part_suffix = +*
1324 local_part_suffix_optional
1325 pipe_transport = rt_pipe
1326 data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --extension ticket --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1327 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1331 # exim4 fails the router if it can't change to the user/group for delivery
1332 # during verification. So we have to seperate the cases of verifying
1333 # the virts, and delivering to them. blah.
1336 debug_print = "R: virt_direct for $local_part@$domain"
1342 directory_transport = address_directory
1343 domains = +virtual_domains
1344 local_part_suffix = -*
1345 local_part_suffix_optional
1346 file = $home/.forward-\
1347 ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1349 file_transport = address_file
1350 pipe_transport = address_pipe
1351 reply_transport = address_reply
1352 retry_use_local_part
1353 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1354 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1357 # This is a qmailesque deliver into a directory of .forward files
1359 debug_print = "R: virt_direct for $local_part@$domain"
1365 directory_transport = address_directory
1366 domains = +virtual_domains
1367 file = $home/.forward-\
1368 ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1370 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1371 group = ${extract{group}{VDOMAINDATA}}
1372 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1374 local_part_suffix = -*
1375 local_part_suffix_optional
1376 pipe_transport = address_pipe
1377 reply_transport = address_reply
1378 retry_use_local_part
1379 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1380 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1382 user = ${extract{user}{VDOMAINDATA}}
1383 #debug_print = .forward-${if exists {${home}/.forward-${local_part}} {${local_part}} {default}}
1385 # This router delivers to the LDAP generated mail-forward file.
1386 # It's only really useful for debian.org
1388 debug_print = "R: virt_users for $local_part@$domain"
1392 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1393 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1394 user = ${extract{user}{VDOMAINDATA}}
1395 group = ${extract{group}{VDOMAINDATA}}
1396 data = ${if exists{${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}\
1397 {${lookup{$local_part}cdb\
1398 {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}
1399 domains = +virtual_domains
1400 file_transport = address_file
1401 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1402 pipe_transport = address_pipe
1403 local_part_suffix = -*
1404 local_part_suffix_optional
1405 retry_use_local_part
1409 if nodeinfo['bugsmaster'] or nodeinfo['bugsmx']
1410 domain = 'bugs.debian.org'
1411 if nodeinfo['bugsmaster']
1412 domain = 'bugs-master.debian.org'
1415 # This router delivers for bugs.d.o
1417 debug_print = "R: bugs for $local_part@$domain"
1419 transport = bugs_pipe
1420 domains = ' + domain + '
1421 cannot_route_message = Unknown or archived bug
1422 require_files = /org/bugs.debian.org/mail/run-procmail
1424 local_parts = ${if match\
1426 {\N^(\d+)(\d{2})(?:-(?:(?:submit|maintonly|quiet|forwarded|done|close|request|submitter)|(?:unsubscribe|ignore|help|(?:sub(?:scribe|help|yes|approve|reject))|unsubyes|bounce|probe|approve|reject|setlistyes|setlistsilentyes).*))?$\N}\
1427 {${if exists{/org/bugs.debian.org/spool/db-h/$2/$1$2.summary}\
1428 {$local_part}fail}}fail}
1433 ######################################################################
1434 # TRANSPORTS CONFIGURATION #
1435 ######################################################################
1436 # ORDER DOES NOT MATTER #
1437 # Only one appropriate transport is called for each delivery. #
1438 ######################################################################
1443 # This transport is used for local delivery to user mailboxes. On debian
1444 # systems group mail is used so we can write to the /var/mail
1445 # directory. (The alternative, which most other unixes use, is to deliver
1446 # as the user's own group, into a sticky-bitted directory)
1449 file = /var/mail/${local_part}
1452 no_mode_fail_narrower
1455 # This transport is used for handling pipe addresses generated by alias
1456 # or .forward files. It has a conventional name, since it is not actually
1457 # mentioned elsewhere in this configuration file. (A different name *can*
1458 # be specified via the "address_pipe_transport" option if you really want
1459 # to.) If the pipe generates any standard output, it is returned to the sender
1460 # of the message as a delivery error. Set return_fail_output instead if you
1461 # want this to happen only when the pipe fails to complete normally.
1465 current_directory = ${home}
1466 environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1467 EXT=${substr_1:${local_part_suffix}}:\
1468 LOCAL=${local_part}${local_part_suffix}:\
1469 RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1473 # This transport is used for handling file addresses generated by alias
1474 # or .forward files. It has a conventional name, since it is not actually
1475 # mentioned elsewhere in this configuration file.
1485 directory_mode = 0770
1486 mode_fail_narrower = false
1488 # This transport is used for handling file addresses generated by alias
1489 # or .forward files if the path ends in "/", which causes it to be treated
1490 # as a directory name rather than a file name. Each message is then delivered
1491 # to a unique file in the directory. If instead you want all such deliveries to
1492 # be in the "maildir" format that is used by some other mail software,
1493 # uncomment the final option below. If this is done, the directory specified
1494 # in the .forward or alias file is the base maildir directory.
1496 # Should you want to be able to specify either maildir or non-maildir
1497 # directory-style deliveries, then you must set up yet another transport,
1498 # called address_directory2. This is used if the path ends in "//" so should
1499 # be the one used for maildir, as the double slash suggests another level
1500 # of directory. In the absence of address_directory2, paths ending in //
1501 # are passed to address_directory.
1511 # This transport is used for handling autoreplies generated by the filtering
1512 # option of the forwardfile director. It has a conventional name, since it
1513 # is not actually mentioned elsewhere in this configuration file.
1517 # This transport is used for delivering messages over SMTP connections.
1521 connect_timeout = 1m
1522 delay_after_cutoff = false
1523 <%- if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true" -%>
1524 tls_certificate = /etc/exim4/ssl/thishost.crt
1525 tls_privatekey = /etc/exim4/ssl/thishost.key
1530 if not nodeinfo['smarthost'].empty?
1532 remote_smtp_smarthost:
1533 debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
1535 delay_after_cutoff = false
1537 out += nodeinfo['smarthost_port'].to_s + "\n"
1538 if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true"
1539 out += ' tls_tempfail_tryclear = false
1540 hosts_require_tls = ' + nodeinfo['smarthost'] + '
1541 tls_certificate = /etc/exim4/ssl/thishost.crt
1542 tls_privatekey = /etc/exim4/ssl/thishost.key
1548 # Send the message to procmail
1551 command = /usr/bin/procmail -a ${substr_1:${local_part_suffix}}
1553 user = ${local_part}
1562 user = ${extract{user}{\
1563 ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1567 <%- if nodeinfo['bugsmaster'] or nodeinfo['bugsmx'] -%>
1570 command = /org/bugs.debian.org/mail/run-procmail
1571 environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1572 EXT=${substr_1:${local_part_suffix}}:\
1573 LOCAL=${local_part}${local_part_suffix}:\
1574 RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1580 <%- if nodeinfo['rtmaster'] -%>
1582 debug_print = "T: rt_pipe for $local_part${local_part_suffix}@$domain"
1585 environment = EXTENSION=${substr_1:${local_part_suffix}}
1586 allow_commands = /usr/bin/rt-mailgate
1590 ######################################################################
1591 # RETRY CONFIGURATION #
1592 ######################################################################
1594 # This single retry rule applies to all domains and all errors. It specifies
1595 # retries every 15 minutes for 2 hours, then increasing retry intervals,
1596 # starting at 2 hours and increasing each time by a factor of 1.5, up to 16
1597 # hours, then retries every 8 hours until 4 days have passed since the first
1600 # Domain Error Retries
1601 # ------ ----- -------
1606 debian.org * F,2h,10m; G,16h,2h,1.5; F,14d,8h
1607 * * senders=: F,2h,10m
1608 * rcpt_4xx F,2h,5m; F,4h,10m; F,4d,15m
1609 * * F,2h,15m; G,16h,2h,1.5; F,4d,8h
1611 # End of Exim 4 configuration