2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
6 # This is the main exim4 configuration file based on the 28.08.05 version by
9 # The configuration file uses a set of rules to generate an
10 # acceptable mail environment for debian.org machines. It deviates
11 # considerably from what could be considered a standard exim configuration.
13 # This configuration file brings in the necessary information from
14 # other databases stored in /etc/exim/ and the files distributed by ud-ldap
16 # This file is independent of the local host, it should not be changed
17 # per machine. primary_hostname is used in all places that require per-host
20 # The configuration files in /etc/exim are as follows:
21 # locals - This is a list of domains that are considered local. A local
22 # domain is essential one that deliveries to /var/mail
23 # will be attempted. The users available for local delivery
24 # comes from /etc/passwd and /etc/aliases. Wildcards are not
26 # virtualdomains - This is a list of all virtual domains. A virtual domain
27 # is much like a local domain, execpt that the delivery location
28 # and allowed set of users is controlled by a virtual domain
29 # alias file and not /etc/passwd. Wildcards are permitted
30 # rcpthosts - recipient hosts or relay domains. This is a list of
31 # all hosts that we mail exchange for. All domains that list
32 # this host in their MX records should be listed here. Wildcards
34 # relayhosts - Hostnames that can send any arbitarily addressed mail to
35 # us. This is primarily only usefull for emergancy 'queue
36 # flushing' operations, but should be populated with a list
37 # of trusted machines. Wildcards are not permitted
38 # bsmtp_domains - Domains that we deliver locally via bsmtp
41 if nodeinfo['mailrelay']
43 # mailhubdomains - Domains for which we are the MX, but the mail is relayed
44 # elsewhere. This is designed for use with small volume or
45 # restricted machines that need to use a smarthost for mail
46 # traffic. We will relay for them based on ssl cert validation
47 # but we need to teach exim how to route the mail to them. This is
53 # Exim's wildcard mechanism is a bit odd in that to say "any address in
54 # debian.org including debian.org" you must use two patterns,
57 # Also you can only place a * before a . and as the first char in a string.
58 # Wildcards always match last so they may be used as a catchall.
60 # Further details can be found in each of the files.
62 # Usefull exim commands:
63 # exim4 -qf - Try sending all messages right now, including frozen ones
64 # exim4 -bt foo@blah - Write what exim would do if it saw the address
65 # Great for testing virtual domains and forward files
67 # Special Features for users:
68 # .forward-foo - is understood as an extension address for bar-foo@cow.com
69 # .forward-default - is understood to be a catch all for bar-*@cow.com
70 # .procmailrc - with no .forward file invokes procmail for delivery
73 # For virtual domains the first lookup is done against a linear text
74 # database called 'aliases', then .forward files are consulted. Exim
75 # filtering is available for these .forward files only. .forward-default
76 # is the universal catch all for everything not handled.
78 # Heuristic check (none bad enough to cause a hard reject, but in aggregate
79 # will trigger things like rcpt to rate limiting or possibly a reject if
80 # enough hits are triggered.
82 # value is stored in acl_c_scr
84 ######################################################################
85 # MAIN CONFIGURATION SETTINGS #
86 ######################################################################
90 if nodeinfo.has_key?('heavy_exim') and not nodeinfo['heavy_exim'].empty?
92 perl_startup = do '/etc/exim4/exim_surbl.pl'
98 # These options specify the Access Control Lists (ACLs) that
99 # are used for incoming SMTP messages - after the RCPT and DATA
100 # commands, respectively.
102 acl_smtp_helo = check_helo
103 acl_smtp_rcpt = ${if ={$interface_port}{587} {check_submission}{check_recipient}}
104 acl_smtp_data = check_message
107 if nodeinfo.has_key?('heavy_exim') and not nodeinfo['heavy_exim'].empty?
108 out = "acl_smtp_mime = acl_check_mime"
112 acl_smtp_predata = acl_check_predata
114 # accept domain literal syntax in e-mail addresses. To actually make use of
115 # this a router is also required
116 allow_domain_literals = true
118 # This setting defines a named domain list called
119 # local_domains. It will be referenced
120 # later on by the syntax "+local_domains".
121 # Other domain and host lists may follow.
122 # @ is the local FQDN, @[] matches the IP adress of any local interface.
124 domainlist local_domains = @ : \
127 ${if exists {/etc/exim4/locals}{lsearch;/etc/exim4/locals}}
129 domainlist virtual_domains = partial-lsearch;/etc/exim4/virtualdomains
131 domainlist submission_domains = ${if exists {/etc/exim4/submission-domains}{/etc/exim4/submission-domains}{}}
133 domainlist bsmtp_domains = ${if exists {/etc/exim4/bsmtp}{partial-lsearch;/etc/exim4/bsmtp}{}}
135 domainlist handled_domains = +local_domains : +virtual_domains : +bsmtp_domains
137 localpartlist local_only_users = lsearch;/etc/exim4/localusers
139 localpartlist postmasterish = postmaster : abuse : hostmaster : root
141 # Domains we relay for; that is domains that aren't considered local but we
142 # accept mail for them.
143 domainlist rcpthosts = partial-lsearch;/etc/exim4/rcpthosts
144 hostlist debianhosts = 127.0.0.1 : net-lsearch;/var/lib/misc/thishost/debianhosts
147 if nodeinfo['mailrelay']
149 domainlist mailhubdomains = lsearch;/etc/exim4/manualroute
155 hostlist reservedaddrs = <%= nodeinfo['reservedaddrs'] %>
158 if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true"
159 out = "tls_certificate = /etc/exim4/ssl/thishost.crt
160 tls_privatekey = /etc/exim4/ssl/thishost.key
161 tls_try_verify_hosts = *
162 tls_verify_certificates = /etc/exim4/ssl/ca.crt
163 tls_crl = /etc/exim4/ssl/ca.crl"
168 # The setting below causes Exim to do a reverse DNS lookup on all incoming
169 # IP calls, in order to get the true host name. If you feel this is too
170 # expensive, you can specify the networks for which a lookup is done, or
171 # remove the setting entirely.
173 dns_ipv4_lookup = !localhost
175 # If this option is set, then any process that is running as one of the
176 # listed users may pass a message to Exim and specify the sender's
177 # address using the "-f" command line option, without Exim's adding a
180 untrusted_set_sender = *
182 # Some operating systems use the "gecos" field in the system password file
183 # to hold other information in addition to users' real names. Exim looks up
184 # this field when it is creating "sender" and "from" headers. If these options
185 # are set, exim uses "gecos_pattern" to parse the gecos field, and then
186 # expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
189 gecos_pattern = ^([^,:]*)
192 # This tells exim to immediately discard error messages (ie double bounces).
193 ignore_bounce_errors_after = 0s
195 timeout_frozen_after=14d
197 message_size_limit = 100M
199 smtp_accept_max_per_host = ${if match_ip {$sender_host_address}{+debianhosts}{0}{7}}
200 <% if nodeinfo.has_key?('heavy_exim') and not nodeinfo['heavy_exim'].empty? %>
201 smtp_accept_max = 300
202 smtp_accept_queue = 200
203 smtp_accept_queue_per_connection = 50
204 smtp_accept_reserve = 25
207 smtp_accept_queue = 20
208 smtp_accept_queue_per_connection = 10
209 smtp_accept_reserve = 5
211 smtp_reserve_hosts = +debianhosts
213 split_spool_directory = true
214 check_spool_inodes = 200
215 check_spool_space = 20M
219 <% if nodeinfo.has_key?('heavy_exim') and not nodeinfo['heavy_exim'].empty? %>
221 deliver_queue_load_max = 50
225 deliver_queue_load_max = 10
228 queue_list_requires_admin = false
231 if has_variable?("clamd") && clamd == "true"
232 out = "av_scanner = clamd:/var/run/clamav/clamd.ctl"
239 out = "daemon_smtp_ports = "
242 if nodeinfo['bugsmaster']
246 if not nodeinfo['mail_port'].to_s.empty?
247 ports << nodeinfo['mail_port']
250 if nodeinfo['mailrelay']
251 ports << nodeinfo['smarthost_port']
254 out += ports.uniq.sort.join(" : ")
259 remote_sort_domains = *.debian.org:*.debian.net
261 pipelining_advertise_hosts = !*
263 if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true"
264 out = 'tls_advertise_hosts = *'
268 smtp_enforce_sync = true
270 log_selector = +tls_cipher +tls_peerdn +queue_time +deliver_time +smtp_connection +smtp_incomplete_transaction +smtp_confirmation
272 received_header_text = Received: ${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
273 {${if def:sender_ident {from ${quote_local_part:$sender_ident} }}${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
274 ${if and {{eq {$tls_certificate_verified}{1}}{def:tls_peerdn}}{from $tls_peerdn (verified)\n\t}}\
275 by $primary_hostname ${if def:received_protocol {with $received_protocol}} ${if def:tls_cipher {($tls_cipher)\n\t}}\
276 (Exim $version_number)\n\t\
277 ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}\
278 id $message_exim_id${if def:received_for {\n\tfor $received_for}}
282 VDOMAINDATA = ${lookup{$domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
283 WHITELIST = ${if match_domain{$domain}{+virtual_domains}{\
284 ${if exists {/srv/$domain/mail/whitelist}{\
285 ${lookup{$local_part}lsearch{/srv/$domain/mail/whitelist}{$value}{}}\
287 }{${lookup{$local_part}lsearch{/etc/exim4/whitelist}{$value}{}} : ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-whitelist}{$value}{}}}}
288 GREYLIST_LOCAL_PARTS = ${if match_domain{$domain}{+virtual_domains}\
289 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
290 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
291 {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}} : \
292 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}}}
293 RT_QUEUE_MAP = /srv/rt.debian.org/mail/rt_queue_map
295 ######################################################################
296 # ACL CONFIGURATION #
297 ######################################################################
301 # This is a bad hack to reset the variable, by defining it be something
304 warn set acl_m_rprf = $acl_m_undefined
306 warn recipients = survey@popcon.debian.org
307 set acl_m_rprf = PopconMail
309 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
311 warn local_parts = +local_only_users
312 domains = +local_domains
313 hosts = !+debianhosts
314 set acl_m_rprf = localonly
316 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
320 if nodeinfo['rtmaster']
322 warn domains = rt.debian.org
323 set acl_m_rprf = RTMail
325 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
332 if nodeinfo['packagesmaster']
334 warn domains = packages.debian.org
335 set acl_m_rprf = PackagesMail
337 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
344 if nodeinfo['packagesqamaster']
346 warn recipients = owner@packages.qa.debian.org : postmaster@packages.qa.debian.org
347 set acl_m_rprf = PTSOwner
349 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
352 domains = packages.qa.debian.org
353 condition = ${if match{$local_part}{\N^bounces+\N}}
354 set acl_m_rprf = PTSListBounce
356 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
358 warn domains = packages.qa.debian.org
359 set acl_m_rprf = PTSMail
361 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
366 warn recipients = change@db.debian.org : changes@db.debian.org : chpasswd@db.debian.org : ping@db.debian.org : recommend@nm.debian.org
367 set acl_m_rprf = DBSignedMail
369 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
371 warn domains = +virtual_domains
372 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
373 condition = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{markup}}
374 log_message = $local_part@$domain: markup
375 set acl_m_rprf = markup
377 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
379 warn condition = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{markup}}
380 log_message = $local_part@$domain: markup
381 set acl_m_rprf = markup
383 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
385 warn condition = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{blackhole}}
386 log_message = $local_part@$domain: blackhole
387 set acl_m_rprf = blackhole
389 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
391 warn domains = +virtual_domains
392 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
393 condition = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{blackhole}}
394 log_message = $local_part@$domain: blackhole
395 set acl_m_rprf = blackhole
397 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
399 warn set acl_m_rprf = normal
405 warn set acl_c_scr = 0
409 if nodeinfo['mailrelay']
410 out = " accept verify = certificate"
417 if nodeinfo['smarthost'].empty?
419 # These are in HELO acl so that they are only run once. They increment a counter,
420 # so we don\'t want it to increment per rcpt to.
422 warn dnslists = list.dnswl.org&0.0.0.3
423 log_message = Hit on list.dnswl.org for $sender_host_address
424 set acl_c_scr = ${eval:$acl_c_scr-30}
426 warn dnslists = list.dnswl.org&0.0.0.2
427 log_message = Hit on list.dnswl.org for $sender_host_address
428 set acl_c_scr = ${eval:$acl_c_scr-20}
430 warn dnslists = list.dnswl.org
431 log_message = Hit on list.dnswl.org for $sender_host_address
432 set acl_c_scr = ${eval:$acl_c_scr-10}
434 warn condition = ${if isip {$sender_helo_name}{true}{false}}
435 log_message = remote host used IP address in HELO/EHLO greeting
436 set acl_c_scr = ${eval:$acl_c_scr+20}
438 warn !hosts = +debianhosts
439 condition = ${if eq{$host_lookup_failed}{1}}
440 set acl_c_scr = ${eval:$acl_c_scr+20}
442 warn !hosts = +debianhosts
443 condition = ${if eq{$host_lookup_failed}{0}}
444 condition = ${if match{$sender_host_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
445 set acl_c_scr = ${eval:$acl_c_scr+20}
447 warn !hosts = +debianhosts
448 condition = ${if match{$sender_helo_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
449 set acl_c_scr = ${eval:$acl_c_scr+20}
451 warn !hosts = +debianhosts
452 dnslists = dul.dnsbl.sorbs.net
453 set acl_c_scr = ${eval:$acl_c_scr+15}
455 # If the sender\'s helo name is empty, the message will be rejected later
456 # because the helo is empty. If the rDNS lookup failed, we are already
457 # going to greylist them, so no sense worrying about it here. Finally,
458 # if rDNS does not match helo name (both lower cased first), greylist.
460 warn !hosts = +debianhosts
461 condition = ${if eq {$host_lookup_failed}{1}{no}{yes}}
462 condition = ${if def:sender_helo_name {yes}{no}}
463 condition = ${if eq {${lc:$sender_helo_name}}{${lc:$sender_host_name}}{no}{yes}}
464 log_message = HELO doesn\'t match rDNS
465 set acl_c_scr = ${eval:$acl_c_scr+8}
468 # matches 098325879 - looks fishy
470 warn condition = ${if and { \
471 { !match{$sender_helo_name}{\N^\[.+\]$\N} } \
472 { !match{$sender_helo_name}{\N^(?i)((?=[^-])[a-z0-9-]*[a-z0-9]\.)+[a-z]{2,6}$\N} } \
475 log_message = non-FQDN HELO
476 set acl_c_scr = ${eval:$acl_c_scr+12}
478 # Matches DOMAIN99.com - looks bad
480 warn condition = ${if match {$sender_helo_name}{\N^[A-Z]+[A-Z0-9\-]+\.[A-Za-z0-9]+$\N}}
481 log_message = SHOUTING HELO
482 set acl_c_scr = ${eval:$acl_c_scr+7}
484 # Random HELO (run of 7 consonants) (constructed by viruses). We purposefully
485 # skip matching on machines named .*smtp.*, since that\'s 4 already. This is a fairly
486 # naive test, so it\'s not worth much
488 warn condition = ${if match {${lc:$sender_helo_name}}{smtp}{no}{yes}}
489 condition = ${if match {${lc:$sender_helo_name}}{\N^[a-z0-9]+\.[a-z]+$\N}}
490 condition = ${if match {${lc:$sender_helo_name}}{\N.*[bcdfghjklmnpqrstvwxz]{7,}.*\.[a-z]+$\N}}
491 log_message = random HELO
492 set acl_c_scr = ${eval:$acl_c_scr+5}
498 # Implicit, but simpler to just say it
501 #!!# ACL that is used after the RCPT command on the submission port
504 # Accept if the source is local SMTP (i.e. not over TCP/IP).
505 # We do this by testing for an empty sending host field.
506 accept hosts = : 127.0.0.1
510 if nodeinfo['mailrelay']
511 out = " accept verify = certificate"
516 # Defer after too many bad RCPT TO's. Legit MTAs will retry later.
517 # This is a rough pass at preventing addres harvesting or other mail blasts.
519 defer log_message = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
520 message = Too many bad recipients, try again later
521 condition = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
524 ratelimit = 5 / 60m / per_rcpt / $sender_host_address
525 !hosts = +debianhosts
526 message = sorry, only 5 reports per hour for submission
528 accept domains = +local_domains
531 message = unknown user
536 if nodeinfo['mailrelay']
538 accept domains = +mailhubdomains
540 message = unknown user
541 verify = recipient/callout=30s,defer_ok,use_sender,no_cache
547 accept domains = +submission_domains
549 message = unknown user
552 deny message = relay not permitted
554 #!!# ACL that is used after the RCPT command
559 if nodeinfo['mailrelay']
560 out = " accept verify = certificate"
565 warn acl = acl_getprofile
566 condition = ${if eq{$acl_m_prf}{}}
567 set acl_m_prf = $acl_m_rprf
569 defer condition = ${if eq{$acl_m_prf}{$acl_m_rprf}{no}{yes}}
570 log_message = Only one profile at a time, please
572 # Defer after too many bad RCPT TO's. Legit MTAs will retry later.
573 # This is a rough pass at preventing addres harvesting or other mail blasts.
575 defer log_message = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
576 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
577 message = Too many bad recipients, try again later
578 !hosts = +debianhosts
579 condition = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
581 # Dump spambots that are so stupid they say helo as our IP address
583 drop !hosts = +debianhosts
584 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
585 condition = ${if eq {$sender_helo_name}{$interface_address}{yes}{no}}
586 message = HELO mismatch Forged HELO for ($sender_helo_name)
588 # Also for spambots that say helo as us or one of our domains
590 drop !hosts = +debianhosts
591 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
592 condition = ${if match_domain{$sender_helo_name}{$primary_hostname:+handled_domains}}
593 condition = ${if !match{$sender_host_name}{${rxquote:$sender_helo_name}\N$\N}}
594 message = HELO mismatch Forged HELO for ($sender_helo_name)
596 # This logic gives you a list of commonly forged domains in helo to reject against
598 warn set acl_m_frg = ${lookup{$sender_helo_name} \
599 nwildlsearch{/etc/exim4/helo-check} \
600 {${if eq{$value}{}{$sender_helo_name}{$value}}}{}}
602 # This is a failsafe in case DNS fails - we defer instead of hard reject if they
603 # say helo as a name in the list but we can't look them up
605 defer !hosts = +debianhosts
606 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
607 condition = ${if eq{$acl_m_frg}{}{no}{yes}}
608 condition = ${if eq{$sender_host_name}{}{yes}{no}}
609 condition = ${if eq{$host_lookup_failed}{1}{no}{yes}}
610 message = Access temporarily denied. Resolve failed PTR for $sender_host_address
612 # If DNS works, go ahead and reject them
614 drop !hosts = +debianhosts
615 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
616 condition = ${if and { {!eq{$acl_m_frg}{}}{!match{$sender_host_name}{${rxquote:$acl_m_frg}\N$\N}}}{yes}{no}}
617 message = HELO mismatch Forged HELO for ($sender_helo_name)
619 # disabled accounts don't even get local mail.
620 deny local_parts = lsearch;/var/lib/misc/$primary_hostname/mail-disable
621 domains = +local_domains
622 message = ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-disable}{$value}}
624 deny domains = +virtual_domains
625 local_parts = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
626 {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
628 hosts = !+debianhosts
629 message = mail for <$local_part@$domain> only accepted from debian.org machines
630 # Accept if the source is local SMTP (i.e. not over TCP/IP).
631 # We do this by testing for an empty sending host field.
634 deny domains = +handled_domains
635 local_parts = ^[.] : ^.*[@%!/|]
637 deny domains = !+handled_domains
638 local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
640 # forwards mail to @d.o address, even if it's a bounce from master, no reply
641 # from source address; rejecting all mail now.
642 deny recipients = mendoza@debian.org
643 hosts = 65.110.39.147 : 64.39.31.15
644 message = <mendoza@kenny.linuxsis.net> cannot forward here while mailer-daemon mail is not caught
646 deny condition = ${lookup{$sender_address_local_part}lsearch{/etc/exim4/localusers}{true}}
647 sender_domains= +local_domains : debian.org : debian.net : debian.com
648 hosts = !+debianhosts
649 message = mail from <$sender_address> not allowed externally
651 deny condition = ${if match_domain{$sender_address_domain}{+virtual_domains}{1}{0}}
652 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
653 condition = ${if match_local_part {$sender_address_local_part}{${extract{directory}{VDOMAINDATA}{${value}/neversenders}}}{1}{0}}
654 message = no mail should ever come from <$sender_address>
656 warn condition = ${if eq{$acl_m_prf}{localonly}}
657 set acl_m_lrc = ${if eq{$acl_m_lrc}{}{$local_part@$domain}{$acl_m_lrc, $local_part@$domain}}
663 deny message = address $sender_host_address is listed in $dnslist_domain; $dnslist_text
664 hosts = !+debianhosts
665 dnslists = rbl.debian.net : rbl.debian.net/$sender_address_domain
672 if nodeinfo['packagesmaster']
674 warn condition = ${if eq {$acl_m_prf}{PackagesMail}}
675 condition = ${if eq {$sender_address}{$local_part@$domain}}
676 message = X-Packages-FromTo-Same: yes
681 deny condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
684 defer !hosts = +debianhosts
685 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
686 condition = ${if >{${eval:$acl_c_scr+0}}{0}}
687 ratelimit = 10 / 60m / per_rcpt / $sender_host_address
688 message = slow down (no reverse dns, mismatched ehlo, dialup, or in blacklists)
691 if has_variable?("policydweight") && policydweight == "true"
693 # Check with policyd-weight - this only works with a version after etch\'s,
694 # sadly. etch\'s version attempts to hold the socket open, since that\'s what
695 # postfix expects. Exim, on the other hand, expects the remote side to close
696 # the socket when it\'s finished sending data, so it see each transaction as
697 # an incomplete read. I\'m sure there\'s a way we could force exim to do
698 # something sick and clever to force either the interpretation or the socket
699 # closure, but I\'m fairly sure it\'s now worth it, since the backport of
700 # policyd-weight is trivial.
701 warn !hosts = +debianhosts
702 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
703 set acl_m_pw = ${readsocket{inet:127.0.0.1:12525}\
704 {request=smtpd_access_policy\n\
705 protocol_state=RCPT\n\
706 protocol_name=${uc:$received_protocol}\n\
707 helo_name=$sender_helo_name\n\
708 queue_id=$message_exim_id\n\
709 sender=$sender_address\n\
710 recipient=$local_part@$domain\n\
711 recipient_count=$rcpt_count\n\
712 client_address=$sender_host_address\n\
713 client_name=$sender_host_name\n\
714 reverse_client_name=$sender_host_name\n\
715 instance=$sender_host_address.$sender_address.$sender_helo_name\n\n}\
716 {20s}{\n}{socket failure}}
718 # Defer on socket error
719 defer !hosts = +debianhosts
720 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
721 condition = ${if eq{$acl_m_pw}{socket failure}{yes}{no}}
722 message = Cannot connect to policyd-weight. Please try again later.
724 # Set proposed action to $acl_m_act and message to $acl_m_mes
725 warn !hosts = +debianhosts
726 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
727 set acl_m_mes = ${extract{action}{$acl_m_pw}}
728 set acl_m_act = ${sg{$acl_m_pw}{\Naction=[^ ]+ (.*)\n\n\N}{\$1}}
730 # Add X-policyd-weight header line to message
731 warn !hosts = +debianhosts
732 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
734 condition = ${if eq{$acl_m_act}{PREPEND}{yes}{no}}
736 # Write log message, if policyd-weight can\'t run checks
737 warn !hosts = +debianhosts
738 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
739 log_message = policyd-weight message: $acl_m_mes
740 condition = ${if eq{$acl_m_act}{DUNNO}{yes}{no}}
742 # Deny mails which policyd-weight thinks are spam
743 deny !hosts = +debianhosts
744 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
745 message = policyd-weight said: $acl_m_mes
746 condition = ${if eq{$acl_m_act}{550}{yes}{no}}
748 # Defer messages when policyd-weight suggests so.
749 defer !hosts = +debianhosts
750 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
751 message = policyd-weight said: $acl_m_mes
752 condition = ${if eq{$acl_m_act}{450}{yes}{no}}
759 if nodeinfo['rtmaster']
761 warn condition = ${if eq{$acl_m_prf}{RTMail}}
762 set acl_m12 = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}} {RTMailRecipientHasSubaddress}}}}
769 if has_variable?("greylistd") && greylistd == "true"
772 message = $sender_host_address is not yet authorized to deliver mail from <$sender_address> to <$local_part@$domain>.
773 log_message = greylisted.
774 local_parts = ${if match_domain{$domain}{+virtual_domains}\
775 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
776 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
777 {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}} : \
778 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}}}
780 !hosts = : +debianhosts : WHITELIST : \
781 ${if exists {/etc/greylistd/whitelist-hosts}\
782 {/etc/greylistd/whitelist-hosts}{}} : \
783 ${if exists {/var/lib/greylistd/whitelist-hosts}\
784 {/var/lib/greylistd/whitelist-hosts}{}}
785 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
787 domains = +handled_domains : +rcpthosts
788 condition = ${readsocket{/var/run/greylistd/socket}\
790 $sender_host_address \
792 $local_part@$domain}\
795 elsif has_variable?("postgrey") && postgrey == "true"
797 # next three are greylisting, inspired by http://www.bebt.de/blog/debian/archives/2006/07/30/T06_12_27/index.html
798 # this adds acl_m_grey if there isn\'t one (so unique per message)
801 !hosts = : +debianhosts : WHITELIST
802 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
803 condition = ${if def:acl_m_grey {no}{yes}}
804 set acl_m_grey = $pid.$tod_epoch.$sender_host_port
806 # and defers the message if postgrey thinks it should be defered ...
809 !hosts = : +debianhosts : WHITELIST
810 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
812 domains = +handled_domains : +rcpthosts
813 local_parts = GREYLIST_LOCAL_PARTS
814 set acl_m_pgr = request=smtpd_access_policy\n\
815 protocol_state=RCPT\n\
816 protocol_name=${uc:$received_protocol}\n\
817 instance=${acl_m_grey}\n\
818 helo_name=${sender_helo_name}\n\
819 client_address=${substr_-3:${mask:$sender_host_address/24}}\n\
820 client_name=${sender_host_name}\n\
821 sender=${sender_address}\n\
822 recipient=$local_part@$domain\n\n
823 set acl_m_pgr = ${sg{\
824 ${readsocket{/var/run/postgrey/socket}{$acl_m_pgr}\
825 {5s}{}{action=DUNNO}}\
827 message = ${sg{$acl_m_pgr}{^\\\\w+\\\\s*}{}}
828 log_message = greylisted.
829 condition = ${if eq{${uc:${substr{0}{5}{$acl_m_pgr}}}}{DEFER}}
831 # ... or adds a header with information about how long the delay was
834 !hosts = : +debianhosts : WHITELIST
835 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
837 domains = +handled_domains : +rcpthosts
838 local_parts = GREYLIST_LOCAL_PARTS
839 condition = ${if eq{${uc:${substr_0_7:$acl_m_pgr}}}{PREPEND}}
840 message = ${sg{$acl_m_pgr}{^\\\\w+\\\\s*}{}}
846 accept local_parts = +postmasterish
847 domains = +handled_domains : +rcpthosts
849 deny hosts = ${if exists{/etc/exim4/host_blacklist}{/etc/exim4/host_blacklist}{}}
850 message = I'm terribly sorry, but it seems you have been blacklisted
851 log_message = blacklisted IP
853 deny log_message = <$sender_address> is blacklisted
854 senders = ${if exists{/etc/exim4/blacklist}{/etc/exim4/blacklist}{}}
855 message = We have blacklisted <$sender_address>. Please stop mailing us
859 if nodeinfo['smarthost'].empty?
861 deny message = host $sender_host_address is listed in $dnslist_domain; see $dnslist_text
862 dnslists = ${if match_domain{$domain}{+virtual_domains}\
863 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}\
864 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}{$value}{}}}{}}}\
865 {${lookup{$local_part}lsearch{/etc/exim4/rbllist}{$value}{}} : \
866 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rbl}{$value}{}}}}
867 domains = +handled_domains : +rcpthosts
868 !hosts = +debianhosts : WHITELIST
874 deny message = domain $sender_address_domain is listed in $dnslist_domain; see $dnslist_text
875 dnslists = ${if match_domain{$domain}{+virtual_domains}\
876 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}\
877 {${expand:${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}{$value}{}}}}{}}}\
878 {${expand:${lookup{$local_part}lsearch{/etc/exim4/rhsbllist}{$value}{}}} : \
879 ${expand:${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rhsbl}{$value}{}}}}}
880 domains = +handled_domains : +rcpthosts
881 !hosts = +debianhosts : WHITELIST
885 if nodeinfo['smarthost'].empty?
887 deny domains = +handled_domains : +rcpthosts
888 local_parts = ${if match_domain{$domain}{+virtual_domains}\
889 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}\
890 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}{$local_part}{}}}{}}}\
891 {${lookup{$local_part}lsearch{/etc/exim4/callout_users}{$local_part}{}} : \
892 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-callout}{$local_part}{}}}}
893 !hosts = +debianhosts : WHITELIST
894 !verify = sender/callout=90s,maxwait=300s
902 if nodeinfo['mailrelay']
904 accept domains = +mailhubdomains
906 message = unknown user
907 verify = recipient/callout=30s,defer_ok,use_sender,no_cache
912 accept domains = +handled_domains
914 message = unknown user
915 verify = recipient/defer_ok
917 accept domains = +rcpthosts
919 message = unrouteable address
922 accept hosts = +debianhosts
924 accept authenticated = *
926 deny message = relay not permitted
930 if nodeinfo.has_key?('heavy_exim') and not nodeinfo['heavy_exim'].empty?
934 discard condition = ${if <{$message_size}{256000}}
935 condition = ${if eq {$acl_m_prf}{blackhole}}
936 set acl_m_srb = ${perl{surblspamcheck}}
937 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
938 log_message = discarded surbl message for $recipients
940 deny condition = ${if <{$message_size}{256000}}
941 condition = ${if eq {$acl_m_prf}{markup}{no}{yes}}
942 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
943 set acl_m_srb = ${perl{surblspamcheck}}
944 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
945 log_message = $acl_m_srb
948 warn condition = ${if <{$message_size}{256000}}
949 condition = ${if eq {$acl_m_prf}{markup}}
950 set acl_m_srb = ${perl{surblspamcheck}}
951 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
952 message = X-Surbl-Hit: $primary_hostname: $acl_m_srb
961 deny condition = ${if eq{$acl_m_prf}{localonly}}
962 message = mail for $acl_m_lrc is only accepted internally
967 #!!# ACL that is used after the DATA command
971 if nodeinfo['rtmaster']
973 deny condition = ${if eq {$acl_m_prf}{RTMail}}
974 condition = ${if and{{!match {${lc:$rh_Subject:}} {debian rt}} \
975 {!match {${lc:$rh_Subject:]}} {\N\[rt.debian.org \N}} \
976 {!match {$acl_m12}{RTMailRecipientHasSubaddress}}}}
977 message = messages to the Request Tracker system require a subject tag or a subaddress
984 if nodeinfo['packagesqamaster']
986 deny !hosts = +debianhosts : 217.196.43.134
987 condition = ${if eq {$acl_m_prf}{PTSMail}}
988 condition = ${if def:h_X-PTS-Approved:{false}{true}}
989 message = messages to the PTS require an X-PTS-Approved header
994 deny condition = ${if eq {$acl_m_prf}{DBSignedMail}}
995 condition = ${if and {{!match {$message_body}{PGP MESSAGE}} \
996 {!match {$message_body}{PGP SIGNED MESSAGE}} \
997 {!match {$message_body}{PGP SIGNATURE}} \
998 {!match {$header_content-type:}{multipart/signed}} \
999 {!match {$header_content-type:}{pgp}} \
1002 message = Mail to this address needs to be PGP-signed
1004 accept verify = certificate
1006 deny condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
1007 !verify = header_syntax
1008 message = Invalid syntax in the header
1010 # RFC 822 and 2822 say that headers must be ASCII. This kinda emulates
1011 # postfix's strict_7bit_headers option, but only checks a few common problem
1012 # headers, as there doesn't appear to be an easy way to check them all.
1014 condition = ${if or {{match {$rh_Subject:}{[\200-\377]}}\
1015 {match {$rh_To:}{[\200-\377]}}\
1016 {match {$rh_From:}{[\200-\377]}}\
1017 {match {$rh_Cc:}{[\200-\377]}}}{true}{false}}
1018 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
1019 message = improper use of 8-bit data in message header: message rejected
1022 condition = ${if match {$rh_Subject:}{[^[:print:]]\{8\}}{true}{false}}
1023 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
1024 message = Your mailer is not RFC 2047 compliant: message rejected
1028 if has_variable?("clamd") && clamd == "true"
1030 discard condition = ${if eq {$acl_m_prf}{blackhole}}
1032 malware = */defer_ok
1033 log_message = discarded malware message for $recipients
1035 deny condition = ${if eq {$acl_m_prf}{markup}{no}{yes}}
1036 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
1038 malware = */defer_ok
1039 message = malware detected: $malware_name: message rejected
1041 warn condition = ${if eq {$acl_m_prf}{markup}}
1043 malware = */defer_ok
1044 message = X-malware detected: $malware_name
1051 if nodeinfo.has_key?('heavy_exim') and not nodeinfo['heavy_exim'].empty?
1053 discard condition = ${if <{$message_size}{256000}}
1054 condition = ${if eq {$acl_m_prf}{blackhole}}
1055 set acl_m_srb = ${perl{surblspamcheck}}
1056 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
1057 log_message = discarded surbl message for $recipients
1059 deny condition = ${if <{$message_size}{256000}}
1060 condition = ${if eq {$acl_m_prf}{markup}{no}{yes}}
1061 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
1062 set acl_m_srb = ${perl{surblspamcheck}}
1063 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
1064 log_message = $acl_m_srb
1065 message = $acl_m_srb
1067 warn condition = ${if <{$message_size}{256000}}
1068 condition = ${if eq {$acl_m_prf}{markup}}
1069 set acl_m_srb = ${perl{surblspamcheck}}
1070 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
1071 message = X-Surbl-Hit: $primary_hostname: $acl_m_srb
1077 # Check header_sender except for survey@popcon.d.o
1078 deny condition = ${if eq{$acl_m_prf}{PopconMail}{false}{true}}
1079 !verify = header_sender
1080 message = No valid sender found in the From:, Sender: and Reply-to: headers
1084 if nodeinfo['packagesmaster']
1086 deny message = Congratulations, you scored $spam_score points.
1087 log_message = spam: $spam_score points.
1088 condition = ${if eq {$acl_m_prf}{PackagesMail}}
1090 !verify = certificate
1091 !hosts = +debianhosts
1092 condition = ${if <{$message_size}{256000}}
1093 spam = pkg_user : true
1094 condition = ${if >{$spam_score_int}{59}}
1103 ######################################################################
1104 # REWRITE CONFIGURATION #
1105 ######################################################################
1111 \N^buildd_(.*)@ries\.debian\.org$\N buildd_$1@buildd.debian.org T
1112 \N^buildd_(.*)@klecker\.debian\.org$\N buildd_$1@buildd.debian.org T
1113 *@debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1114 *@people.debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1115 #*@${primary_hostname} "${if exists{/etc/exim4/email-addresses}{${lookup{$1}lsearch{/etc/exim4/email-addresses}{$value}fail}}fail}" fFs
1116 m68k@buildd.debian.org m68k-build@nocrew.org Ttrbc
1119 #!!#######################################################!!#
1120 #!!# Here follow routers created from the old routers, #!!#
1121 #!!# for handling non-local domains. #!!#
1122 #!!#######################################################!!#
1128 ######################################################################
1129 # ROUTERS CONFIGURATION #
1130 # Specifies how addresses are handled #
1131 ######################################################################
1132 # ORDER DOES MATTER #
1133 # An address is passed to each in turn until it is accepted. #
1134 ######################################################################
1138 if nodeinfo['mailrelay']
1141 driver = manualroute
1142 domains = +mailhubdomains
1143 transport = remote_smtp
1144 route_data = ${lookup{$domain}lsearch{/etc/exim4/manualroute}}
1145 require_files = /etc/exim4/manualroute
1152 debug_print = "R: bsmtp for $local_part@$domain"
1153 driver = manualroute
1154 domains = +bsmtp_domains
1155 require_files = /etc/exim4/bsmtp
1156 route_list = * ${extract{file}{\
1157 ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1161 # This router routes to remote hosts over SMTP by explicit IP address,
1162 # given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
1163 # require this facility, which is why it is enabled by default in Exim.
1165 debug_print = "R: ipliteral for $local_part@$domain"
1167 domains = !+handled_domains
1168 transport = remote_smtp
1169 ignore_target_hosts = +reservedaddrs
1173 if not nodeinfo['smarthost'].empty?
1176 debug_print = "R: smarthost for $local_part@$domain"
1177 driver = manualroute
1178 domains = !+handled_domains
1179 transport = remote_smtp_smarthost
1180 route_list = * ' + nodeinfo['smarthost']
1181 if nodeinfo['smarthost'] == 'mailout.debian.org'
1185 host_find_failed = defer
1186 same_domain_copy_routing = yes
1193 # This router routes to remote hosts over SMTP using a DNS lookup.
1194 # Ignore reserved network responses, including localhost.
1196 debug_print = "R: dnslookup for $local_part@$domain"
1198 domains = !+handled_domains
1199 transport = remote_smtp
1200 ignore_target_hosts = +reservedaddrs
1204 debug_print = "R: postmasterish for $local_part@$domain"
1209 local_parts = +postmasterish
1210 domains = +handled_domains
1211 data = debian-admin@debian.org
1212 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1214 # This router handles aliasing using a traditional /etc/aliases file.
1215 # If any of your aliases expand to pipes or files, you will need to set
1216 # up a user and a group for these deliveries to run under. You can do
1217 # this by uncommenting the "user" option below (changing the user name
1218 # as appropriate) and adding a "group" option if necessary.
1221 debug_print = "R: system_aliases for $local_part@$domain"
1225 data = ${lookup{$local_part}lsearch*{/etc/aliases}}
1226 domains = +local_domains
1227 file_transport = address_file
1228 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1229 pipe_transport = address_pipe
1230 retry_use_local_part
1232 # This router handles forwarding using traditional .forward files.
1233 # It also allows mail filtering when a forward file starts with the
1234 # string "# Exim filter": to disable filtering, uncomment the "filter"
1235 # option. The check_ancestor option means that if the forward file
1236 # generates an address that is an ancestor of the current one, the
1237 # current one gets passed on instead. This covers the case where A is
1238 # aliased to B and B has a .forward file pointing to A.
1240 # For standard debian setup of one group per user, it is acceptable---normal
1241 # even---for .forward to be group writable. If you have everyone in one
1242 # group, you should comment out the "modemask" line. Without it, the exim
1243 # default of 022 will apply, which is probably what you want.
1246 debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1251 directory_transport = address_directory
1252 domains = +local_domains
1253 # filter - I have disabled filtering to force users to use .forward-foo files
1254 # or procmail. This will make it easier to move mailers in the future
1256 # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1257 # also checks if the .forward-bar exists, if not then it uses
1258 # .forward-default instead.
1259 file = $home/.forward\
1260 ${if eq{}{$local_part_suffix}{}{\
1261 ${if exists {${home}/.forward${local_part_suffix}} \
1262 {${local_part_suffix}}{-default}}\
1265 file_transport = address_file
1266 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1267 local_part_suffix = -*
1268 local_part_suffix_optional
1270 pipe_transport = address_pipe
1271 reply_transport = address_reply
1272 require_files = $home
1273 router_home_directory = ${lookup passwd{$local_part}{${extract{5}{:}{$value}}}fail}
1277 debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1281 directory_transport = address_directory
1282 domains = +local_domains
1283 # filter - I have disabled filtering to force users to use .forward-foo files
1284 # or procmail. This will make it easier to move mailers in the future
1286 # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1287 # also checks if the .forward-bar exists, if not then it uses
1288 # .forward-default instead.
1289 file = $home/.forward\
1290 ${if eq{}{$local_part_suffix}{}{\
1291 ${if exists {${home}/.forward${local_part_suffix}} \
1292 {${local_part_suffix}}{-default}}\
1295 file_transport = address_file
1296 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1297 local_part_suffix = -*
1298 local_part_suffix_optional
1300 pipe_transport = address_pipe
1301 reply_transport = address_reply
1302 require_files = $home
1305 # This delivers to procmail
1307 debug_print = "R: procmail for $local_part@$domain"
1310 domains = +local_domains
1311 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1314 require_files = $local_part:$home/.procmailrc
1315 transport = procmail_pipe
1316 transport_current_directory = $home
1318 # This driver delivers to the LDAP generated alias file.
1320 debug_print = "R: ldap_aliases for $local_part@$domain"
1324 data = ${if exists{/var/lib/misc/$primary_hostname/mail-forward.cdb}\
1325 {${lookup{$local_part}cdb\
1326 {/var/lib/misc/$primary_hostname/mail-forward.cdb}}}}
1327 domains = +local_domains
1328 file_transport = address_file
1329 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1330 pipe_transport = address_pipe
1331 retry_use_local_part
1333 # This director matches local user mailboxes.
1335 debug_print = "R: localuser for $local_part@$domain"
1338 domains = +local_domains
1339 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1340 # Disable if the user has never logged in
1341 require_files = $home
1342 transport = local_delivery
1345 # Now we begin the Virtual Domain configuration
1346 # Everything before here should apply only to the local domains with a
1349 # exim4 fails the router if it can't change to the user/group for delivery
1350 # during verification. So we have to seperate the cases of verifying
1351 # the virts, and delivering to them. blah.
1354 if nodeinfo['packagesmaster']
1356 # This router delivers for packages.d.o
1358 debug_print = "R: packages for $local_part@$domain"
1360 file_transport = address_file
1361 pipe_transport = address_pipe
1362 domains = packages.debian.org
1363 require_files = /org/packages.debian.org/conf/maintainer
1364 data = ${lookup{$local_part}cdb{/org/packages.debian.org/conf/maintainer.cdb}}
1365 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1366 transport_home_directory = /org/packages.debian.org/mail
1367 transport_current_directory = /org/packages.debian.org/mail
1369 retry_use_local_part
1378 if nodeinfo['bugsmaster']
1380 # This router delivers for bugs.d.o
1382 debug_print = "R: bugs for $local_part@$domain"
1384 transport = bugs_pipe
1385 domains = bugs.debian.org
1386 cannot_route_message = Unknown or archived bug
1387 require_files = /org/bugs.debian.org/mail/run-procmail
1389 local_parts = ${if match\
1391 {\N^(\d+)(\d{2})(?:-(?:(?:submit|maintonly|quiet|forwarded|done|close|request|submitter)|(?:unsubscribe|ignore|(?:sub(?:scribe|help|yes|approve|reject))|unsubyes|bounce|probe|approve|reject|setlistyes|setlistsilentyes).*))?$\N}\
1392 {${if exists{/org/bugs.debian.org/spool/db-h/$2/$1$2.summary}\
1393 {$local_part}fail}}fail}
1401 if nodeinfo['rtmaster']
1403 # This router delivers for rt.d.o
1404 rt_force_new_verbose:
1405 debug_print = "R: rt for $local_part+new@$domain"
1407 domains = rt.debian.org
1408 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1409 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1410 local_part_suffix = +new
1411 pipe_transport = rt_pipe
1412 data = "|/usr/bin/rt-mailgate --queue \'${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}\' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1413 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1415 # FIXME: figure out how to generalize this approach so that all of the following would work
1416 # - rt+NNNN@rt.debian.org : attach correspondence to ticket (verbose)
1417 # - rt+NNNN-quiesce@rt.debian.org : attach correspondence to ticket (quiesce)
1418 # - rt+NNNN-<action>@rt.debian.org : attach correspondence to ticket (some action)
1419 # requires modification to custom condition in \'scrips\'
1420 rt_force_new_quiesce:
1421 debug_print = "R: rt for $local_part+new-quiesce@$domain"
1423 domains = rt.debian.org
1424 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1425 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1426 local_part_suffix = +new-quiesce
1427 pipe_transport = rt_pipe
1428 data = "|/usr/bin/rt-mailgate --queue \'${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}\' --url https://rt.debian.org/ --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1429 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nX-RT-Mode: quiesce"
1432 debug_print = "R: rt for $local_part@$domain"
1434 domains = rt.debian.org
1435 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1436 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1437 local_part_suffix = +*
1438 local_part_suffix_optional
1439 pipe_transport = rt_pipe
1440 data = "|/usr/bin/rt-mailgate --queue \'${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}\' --url https://rt.debian.org/ --extension ticket --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1441 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1448 debug_print = "R: virt_aliases for $local_part@$domain"
1450 data = ${if exists{\
1451 ${extract{directory}{VDOMAINDATA}{${value}/aliases}}}\
1452 {${lookup{$local_part}lsearch*{\
1453 ${extract{directory}{VDOMAINDATA}{$value/aliases}}\
1455 directory_transport = address_directory
1456 cannot_route_message = Unknown user
1457 domains = +virtual_domains
1458 file_transport = address_file
1459 pipe_transport = address_pipe
1460 qualify_preserve_domain
1461 retry_use_local_part
1462 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1463 transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1467 debug_print = "R: virt_direct for $local_part@$domain"
1473 directory_transport = address_directory
1474 domains = +virtual_domains
1475 file = $home/.forward-\
1476 ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1478 file_transport = address_file
1479 pipe_transport = address_pipe
1480 reply_transport = address_reply
1481 retry_use_local_part
1482 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1483 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1486 # This is a senmailesque alias file lookup
1488 debug_print = "R: virt_aliases for $local_part@$domain"
1492 data = ${if exists{\
1493 ${extract{directory}{VDOMAINDATA}{${value}/aliases}}}\
1494 {${lookup{$local_part}lsearch*{\
1495 ${extract{directory}{VDOMAINDATA}{$value/aliases}}\
1497 directory_transport = address_directory
1498 domains = +virtual_domains
1499 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1500 cannot_route_message = Unknown user
1501 group = ${extract{group}{VDOMAINDATA}}
1502 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1503 pipe_transport = address_pipe
1504 qualify_preserve_domain
1505 retry_use_local_part
1506 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1507 transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1509 user = ${extract{user}{VDOMAINDATA}}
1511 # This is a qmailesque deliver into a directory of .forward files
1513 debug_print = "R: virt_direct for $local_part@$domain"
1519 directory_transport = address_directory
1520 domains = +virtual_domains
1521 file = $home/.forward-\
1522 ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1524 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1525 group = ${extract{group}{VDOMAINDATA}}
1526 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1528 pipe_transport = address_pipe
1529 reply_transport = address_reply
1530 retry_use_local_part
1531 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1532 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1534 user = ${extract{user}{VDOMAINDATA}}
1535 #debug_print = .forward-${if exists {${home}/.forward-${local_part}} {${local_part}} {default}}
1537 ######################################################################
1538 # TRANSPORTS CONFIGURATION #
1539 ######################################################################
1540 # ORDER DOES NOT MATTER #
1541 # Only one appropriate transport is called for each delivery. #
1542 ######################################################################
1547 # This transport is used for local delivery to user mailboxes. On debian
1548 # systems group mail is used so we can write to the /var/mail
1549 # directory. (The alternative, which most other unixes use, is to deliver
1550 # as the user's own group, into a sticky-bitted directory)
1553 file = /var/mail/${local_part}
1556 no_mode_fail_narrower
1559 # This transport is used for handling pipe addresses generated by alias
1560 # or .forward files. It has a conventional name, since it is not actually
1561 # mentioned elsewhere in this configuration file. (A different name *can*
1562 # be specified via the "address_pipe_transport" option if you really want
1563 # to.) If the pipe generates any standard output, it is returned to the sender
1564 # of the message as a delivery error. Set return_fail_output instead if you
1565 # want this to happen only when the pipe fails to complete normally.
1569 current_directory = ${home}
1570 environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1571 EXT=${substr_1:${local_part_suffix}}:\
1572 LOCAL=${local_part}${local_part_suffix}:\
1573 RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1577 # This transport is used for handling file addresses generated by alias
1578 # or .forward files. It has a conventional name, since it is not actually
1579 # mentioned elsewhere in this configuration file.
1589 directory_mode = 0770
1590 mode_fail_narrower = false
1592 # This transport is used for handling file addresses generated by alias
1593 # or .forward files if the path ends in "/", which causes it to be treated
1594 # as a directory name rather than a file name. Each message is then delivered
1595 # to a unique file in the directory. If instead you want all such deliveries to
1596 # be in the "maildir" format that is used by some other mail software,
1597 # uncomment the final option below. If this is done, the directory specified
1598 # in the .forward or alias file is the base maildir directory.
1600 # Should you want to be able to specify either maildir or non-maildir
1601 # directory-style deliveries, then you must set up yet another transport,
1602 # called address_directory2. This is used if the path ends in "//" so should
1603 # be the one used for maildir, as the double slash suggests another level
1604 # of directory. In the absence of address_directory2, paths ending in //
1605 # are passed to address_directory.
1615 # This transport is used for handling autoreplies generated by the filtering
1616 # option of the forwardfile director. It has a conventional name, since it
1617 # is not actually mentioned elsewhere in this configuration file.
1621 # This transport is used for delivering messages over SMTP connections.
1625 connect_timeout = 1m
1626 delay_after_cutoff = false
1629 if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true"
1630 out = " tls_certificate = /etc/exim4/ssl/thishost.crt
1631 tls_privatekey = /etc/exim4/ssl/thishost.key"
1638 if not nodeinfo['smarthost'].empty?
1640 remote_smtp_smarthost:
1641 debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
1643 delay_after_cutoff = false
1645 out += nodeinfo['smarthost_port'].to_s + "\n"
1646 if has_variable?("exim_ssl_certs") && exim_ssl_certs == "true"
1647 out += ' tls_tempfail_tryclear = false
1648 hosts_require_tls = ' + nodeinfo['smarthost'] + '
1649 tls_certificate = /etc/exim4/ssl/thishost.crt
1650 tls_privatekey = /etc/exim4/ssl/thishost.key
1657 # Send the message to procmail
1660 command = /usr/bin/procmail -a ${substr_1:${local_part_suffix}}}
1662 user = ${local_part}
1671 user = ${extract{user}{\
1672 ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1678 if nodeinfo['bugsmaster']
1682 command = /org/bugs.debian.org/mail/run-procmail
1683 environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1684 EXT=${substr_1:${local_part_suffix}}:\
1685 LOCAL=${local_part}${local_part_suffix}:\
1686 RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1697 if nodeinfo['rtmaster']
1700 debug_print = "T: rt_pipe for $local_part${local_part_suffix}@$domain"
1703 environment = EXTENSION=${substr_1:${local_part_suffix}}
1704 allow_commands = /usr/bin/rt-mailgate
1710 ######################################################################
1711 # RETRY CONFIGURATION #
1712 ######################################################################
1714 # This single retry rule applies to all domains and all errors. It specifies
1715 # retries every 15 minutes for 2 hours, then increasing retry intervals,
1716 # starting at 2 hours and increasing each time by a factor of 1.5, up to 16
1717 # hours, then retries every 8 hours until 4 days have passed since the first
1720 # Domain Error Retries
1721 # ------ ----- -------
1726 debian.org * F,2h,10m; G,16h,2h,1.5; F,14d,8h
1727 * rcpt_4xx F,2h,5m; F,4h,10m; F,4d,15m
1728 * * F,2h,15m; G,16h,2h,1.5; F,4d,8h
1730 # End of Exim 4 configuration