2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
6 # This is the main exim4 configuration file based on the 28.08.05 version by
9 # The configuration file uses a set of rules to generate an
10 # acceptable mail environment for debian.org machines. It deviates
11 # considerably from what could be considered a standard Exim configuration.
13 # This configuration file brings in the necessary information from
14 # other databases stored in /etc/exim4/ and the files distributed by ud-ldap
16 # This file is independent of the local host, it should not be changed
17 # per machine. primary_hostname is used in all places that require per-host
20 # The configuration files in /etc/exim4 are as follows:
21 # locals - This is a list of domains that are considered local. A local
22 # domain is essentially one for which deliveries to /var/mail
23 # will be attempted. The users available for local delivery
24 # come from /etc/passwd and /etc/aliases. Wildcards are not
26 # virtualdomains - This is a list of all virtual domains. A virtual domain
27 # is much like a local domain, execpt that the delivery location
28 # and allowed set of users is controlled by a virtual domain
29 # alias file and not /etc/passwd. Wildcards are permitted
30 # relayhosts - Hostnames that can send any arbitarily addressed mail to
31 # us. This is primarily only useful for emergency 'queue
32 # flushing' operations, but should be populated with a list
33 # of trusted machines. Wildcards are not permitted
34 # bsmtp_domains - Domains that we deliver locally via bsmtp
35 <%- if @is_mailrelay -%>
36 # mailhubdomains - Domains for which we are the MX, but the mail is relayed
37 # elsewhere. This is designed for use with small volume or
38 # restricted machines that need to use a smarthost for mail
39 # traffic. We will relay for them based on ssl cert validation
40 # but we need to teach Exim how to route the mail to them. This is
44 # Exim's wildcard mechanism is a bit odd in that to say "any address in
45 # debian.org including debian.org" you must use two patterns,
48 # Also you can only place a * before a . and as the first char in a string.
49 # Wildcards always match last so they may be used as a catchall.
51 # Further details can be found in each of the files.
53 # Useful Exim commands:
54 # exim4 -qf - Try sending all messages right now, including frozen ones
55 # exim4 -bt foo@blah - Write what Exim would do if it saw the address
56 # Great for testing virtual domains and forward files
58 # Special Features for users:
59 # .forward-foo - is understood as an extension address for bar-foo@cow.com
60 # .forward-default - is understood to be a catch all for bar-*@cow.com
61 # .procmailrc - with no .forward file invokes procmail for delivery
64 # For virtual domains the first lookup is done against a linear text
65 # database called 'aliases', then .forward files are consulted. Exim
66 # filtering is available for these .forward files only. .forward-default
67 # is the universal catch all for everything not handled.
69 # Heuristic check (none bad enough to cause a hard reject, but in aggregate
70 # will trigger things like rcpt to rate limiting or possibly a reject if
71 # enough hits are triggered).
73 # value is stored in acl_c_scr
75 ######################################################################
76 # MAIN CONFIGURATION SETTINGS #
77 ######################################################################
80 perl_startup = do '/etc/exim4/exim_surbl.pl'
83 # These options specify the Access Control Lists (ACLs) that
84 # are used for incoming SMTP messages - after the RCPT and DATA
85 # commands, respectively.
87 acl_smtp_helo = check_helo
88 acl_smtp_rcpt = ${if ={$interface_port}{587} {check_submission}{check_recipient}}
89 acl_smtp_data = check_message
91 acl_smtp_mime = acl_check_mime
93 acl_smtp_predata = acl_check_predata
95 # accept domain literal syntax in e-mail addresses. To actually make use of
96 # this a router is also required
97 allow_domain_literals = true
99 # This setting defines a named domain list called
100 # local_domains. It will be referenced
101 # later on by the syntax "+local_domains".
102 # Other domain and host lists may follow.
103 # @ is the local FQDN, @[] matches the IP adress of any local interface.
105 domainlist local_domains = @ : \
108 ${if exists {/etc/exim4/locals}{lsearch;/etc/exim4/locals}}
110 domainlist virtual_domains = partial-lsearch;/etc/exim4/virtualdomains
112 domainlist submission_domains = ${if exists {/etc/exim4/submission-domains}{/etc/exim4/submission-domains}{}}
114 domainlist bsmtp_domains = ${if exists {/etc/exim4/bsmtp}{partial-lsearch;/etc/exim4/bsmtp}{}}
116 domainlist handled_domains = +local_domains : +virtual_domains : +bsmtp_domains
118 domainlist ourself_and_handled = $primary_hostname : +handled_domains
120 localpartlist local_only_users = lsearch;/etc/exim4/localusers
122 localpartlist postmasterish = postmaster : abuse : hostmaster
124 hostlist debianhosts = <; ; 127.0.0.1 ; ::1 ; /var/lib/misc/thishost/debianhosts ; 89.16.166.49 ; 82.195.75.76 ; 2001:41b8:202:deb:bab5:0:52c3:4b4c
126 hostlist reservedaddrs = 0.0.0.0/8 : 127.0.0.0/8 : 10.0.0.0/8 : 169.254.0.0/16 : 172.16.0.0/12 : 192.0.0.0/24 : 192.168.0.0/16 : 224.0.0.0/4 : 240.0.0.0/5 : 248.0.0.0/5
128 <%- if @is_mailrelay -%>
129 # Domains we relay for; that is domains that aren't considered local but we
130 # accept mail for them.
131 domainlist mailhubdomains = lsearch;/etc/exim4/manualroute
134 tls_certificate = /etc/exim4/ssl/thishost.crt
135 tls_privatekey = /etc/exim4/ssl/thishost.key
136 tls_try_verify_hosts = *
137 tls_verify_certificates = /etc/exim4/ssl/ca.crt
138 tls_crl = /etc/exim4/ssl/ca.crl
140 # The setting below causes Exim to do a reverse DNS lookup on all incoming
141 # IP calls, in order to get the true host name. If you feel this is too
142 # expensive, you can specify the networks for which a lookup is done, or
143 # remove the setting entirely.
145 # dns_ipv4_lookup = !localhost (disabled upon sgrans request, zobel, 2010-03-16)
147 # If this option is set, then any process that is running as one of the
148 # listed users may pass a message to Exim and specify the sender's
149 # address using the "-f" command line option, without Exim's adding a
152 untrusted_set_sender = *
154 # Some spam scanners (*cough* irritated *cough*) want the Sender field
155 # to exist. Appease them by not actually adding a Sender field.
157 local_from_check = false
159 # Some operating systems use the "gecos" field in the system password file
160 # to hold other information in addition to users' real names. Exim looks up
161 # this field when it is creating "sender" and "from" headers. If these options
162 # are set, Exim uses "gecos_pattern" to parse the gecos field, and then
163 # expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
166 gecos_pattern = ^([^,:]*)
169 # This tells Exim to immediately discard error messages (ie double bounces).
170 ignore_bounce_errors_after = 0s
172 timeout_frozen_after=14d
174 message_size_limit = 100M
176 smtp_accept_max_per_host = ${if match_ip {$sender_host_address}{+debianhosts}{0}{7}}
178 smtp_accept_max = 300
179 smtp_accept_queue = 200
180 smtp_accept_queue_per_connection = 50
181 smtp_accept_reserve = 25
184 smtp_accept_queue = 20
185 smtp_accept_queue_per_connection = 10
186 smtp_accept_reserve = 5
188 smtp_reserve_hosts = +debianhosts
190 split_spool_directory = true
191 check_spool_inodes = 200
192 check_spool_space = 20M
197 message_body_visible = 5000
199 deliver_queue_load_max = 50
201 smtp_load_reserve = 20
204 <%- if scope.lookupvar('::processorcount').to_s != 'undefined' -%>
205 deliver_queue_load_max = <%= [scope.lookupvar('::processorcount').to_i,2].max * 5 %>
206 queue_only_load = <%= [scope.lookupvar('::processorcount').to_i,2].max * 4 %>
208 deliver_queue_load_max = 10
212 queue_list_requires_admin = false
214 <%- if has_variable?("clamd") && @clamd -%>
215 av_scanner = clamd:/var/run/clamav/clamd.ctl
220 out = "daemon_smtp_ports = "
222 if @mail_port # if we have an overridden mail_port
231 ports << @smarthost_port
234 out += ports.uniq.sort.join(" : ")
239 remote_sort_domains = *.debian.org:*.debian.net
241 pipelining_advertise_hosts = !*
242 tls_advertise_hosts = *
243 smtp_enforce_sync = true
245 log_selector = +tls_cipher +tls_peerdn +queue_time +deliver_time +smtp_connection +smtp_incomplete_transaction +smtp_confirmation +smtp_protocol_error
247 received_header_text = Received: ${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
248 {${if def:sender_ident {from ${quote_local_part:$sender_ident} }}${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
249 ${if and {{eq {$tls_certificate_verified}{1}}{def:tls_peerdn}}{from $tls_peerdn (verified)\n\t}}\
250 by $primary_hostname ${if def:received_protocol {with $received_protocol}} ${if def:tls_cipher {($tls_cipher)\n\t}}\
251 (Exim $version_number)\n\t\
252 ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}\
253 id $message_exim_id${if def:received_for {\n\tfor $received_for}}
257 VDOMAINDATA = ${lookup{$domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
258 VSENDERDOMAINDATA = ${lookup{$sender_address_domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
259 WHITELIST = ${if match_domain{$domain}{+virtual_domains}\
260 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}\
261 {${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}{$value}{}}}{}}}\
262 {/etc/exim4/whitelist} } : \
263 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-whitelist}{$value}{}}
264 GREYLIST_LOCAL_PARTS = ${if match_domain{$domain}{+virtual_domains}\
265 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
266 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
267 {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}}}} : \
268 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}
269 <%- if @is_rtmaster -%>
270 RT_QUEUE_MAP = /srv/rt.debian.org/mail/rt_queue_map
276 ######################################################################
277 # ACL CONFIGURATION #
278 ######################################################################
282 # There are a few profiles that don't want much smtp time checking of
283 # mail. It's easier to track them in one place
285 accept condition = ${if eq {$acl_m_prf}{PopconMail}}
286 accept condition = ${if eq {$acl_m_prf}{BugsMail}}
290 # This is a bad hack to reset the variable, by defining it be something
293 warn set acl_m_rprf = $acl_m_undefined
295 warn recipients = survey@popcon.debian.org
296 set acl_m_rprf = PopconMail
298 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
300 warn local_parts = +local_only_users
301 domains = +local_domains
302 hosts = !+debianhosts
303 set acl_m_rprf = localonly
305 <%- if @is_mailrelay -%>
306 warn local_parts = +local_only_users
307 domains = +mailhubdomains
308 hosts = !+debianhosts
309 set acl_m_rprf = localonly
312 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
314 <%- if @is_rtmaster -%>
315 warn domains = rt.debian.org
316 set acl_m_rprf = RTMail
318 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
321 <%- if @is_bugsmx -%>
322 warn domains = bugs.debian.org
323 set acl_m_rprf = BugsMail
325 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
328 <%- if @is_packagesmaster -%>
329 warn domains = packages.debian.org
330 set acl_m_rprf = PackagesMail
332 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
335 <%- if @is_packagesqamaster -%>
336 warn recipients = owner@packages.qa.debian.org : postmaster@packages.qa.debian.org
337 set acl_m_rprf = PTSOwner
339 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
342 domains = packages.qa.debian.org
343 condition = ${if match{$local_part}{\N^bounces+\N}}
344 set acl_m_rprf = PTSListBounce
346 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
348 warn domains = packages.qa.debian.org
349 set acl_m_rprf = PTSMail
351 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
354 warn recipients = change@db.debian.org : changes@db.debian.org : chpasswd@db.debian.org : ping@db.debian.org : recommend@nm.debian.org
355 set acl_m_rprf = DBSignedMail
357 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
359 warn domains = +virtual_domains
360 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
361 condition = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{markup}}
362 set acl_m_rprf = markup
364 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
366 warn domains = +virtual_domains
367 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
368 condition = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{blackhole}}
369 set acl_m_rprf = blackhole
371 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
373 warn domains = +virtual_domains
374 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
375 condition = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{markup}}
376 set acl_m_rprf = markup
378 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
380 warn domains = +virtual_domains
381 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
382 condition = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{blackhole}}
383 set acl_m_rprf = blackhole
385 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
387 warn domains = +local_domains
388 condition = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{markup}}
389 set acl_m_rprf = markup
391 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
393 warn domains = +local_domains
394 condition = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{blackhole}}
395 set acl_m_rprf = blackhole
397 accept condition = ${if eq {$acl_m_rprf}{}{no}{yes}}
399 warn set acl_m_rprf = normal
405 warn set acl_c_scr = 0
407 <%- if @is_mailrelay -%>
408 accept verify = certificate
411 <%- unless @use_smarthost -%>
412 # These are in HELO acl so that they are only run once. They increment a counter,
413 # so we don't want it to increment per rcpt to.
415 warn dnslists = list.dnswl.org&0.0.0.3
416 log_message = Hit on list.dnswl.org for $sender_host_address
417 set acl_c_scr = ${eval:$acl_c_scr-30}
419 warn dnslists = list.dnswl.org&0.0.0.2
420 log_message = Hit on list.dnswl.org for $sender_host_address
421 set acl_c_scr = ${eval:$acl_c_scr-20}
423 warn dnslists = list.dnswl.org
424 log_message = Hit on list.dnswl.org for $sender_host_address
425 set acl_c_scr = ${eval:$acl_c_scr-10}
427 warn condition = ${if isip {$sender_helo_name}{true}{false}}
428 log_message = remote host used IP address in HELO/EHLO greeting
429 set acl_c_scr = ${eval:$acl_c_scr+20}
431 warn !hosts = +debianhosts
432 condition = ${if eq{$host_lookup_failed}{1}}
433 set acl_c_scr = ${eval:$acl_c_scr+20}
435 warn !hosts = +debianhosts
436 condition = ${if eq{$host_lookup_failed}{0}}
437 condition = ${if match{$sender_host_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
438 set acl_c_scr = ${eval:$acl_c_scr+20}
440 warn !hosts = +debianhosts
441 condition = ${if match{$sender_helo_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
442 set acl_c_scr = ${eval:$acl_c_scr+20}
444 warn !hosts = +debianhosts
445 dnslists = dul.dnsbl.sorbs.net
446 set acl_c_scr = ${eval:$acl_c_scr+15}
448 # If the sender's helo name is empty, the message will be rejected later
449 # because the helo is empty. If the rDNS lookup failed, we are already
450 # going to greylist them, so no sense worrying about it here. Finally,
451 # if rDNS does not match helo name (both lower cased first), greylist.
453 warn !hosts = +debianhosts
454 condition = ${if eq {$host_lookup_failed}{1}{no}{yes}}
455 condition = ${if def:sender_helo_name {yes}{no}}
456 condition = ${if eq {${lc:$sender_helo_name}}{${lc:$sender_host_name}}{no}{yes}}
457 log_message = HELO doesn't match rDNS
458 set acl_c_scr = ${eval:$acl_c_scr+8}
461 # matches 098325879 - looks fishy
463 warn condition = ${if and { \
464 { !match{$sender_helo_name}{\N^\[.+\]$\N} } \
465 { !match{$sender_helo_name}{\N^(?i)((?=[^-])[a-z0-9-]*[a-z0-9]\.)+[a-z]{2,6}$\N} } \
468 log_message = non-FQDN HELO
469 set acl_c_scr = ${eval:$acl_c_scr+12}
471 # Matches DOMAIN99.com - looks bad
473 warn condition = ${if match {$sender_helo_name}{\N^[A-Z]+[A-Z0-9\-]+\.[A-Za-z0-9]+$\N}}
474 log_message = SHOUTING HELO
475 set acl_c_scr = ${eval:$acl_c_scr+7}
477 # Random HELO (run of 7 consonants) (constructed by viruses). We purposefully
478 # skip matching on machines named .*smtp.*, since that's 4 already. This is a fairly
479 # naive test, so it's not worth much
481 warn condition = ${if match {${lc:$sender_helo_name}}{smtp}{no}{yes}}
482 condition = ${if match {${lc:$sender_helo_name}}{\N^[a-z0-9]+\.[a-z]+$\N}}
483 condition = ${if match {${lc:$sender_helo_name}}{\N.*[bcdfghjklmnpqrstvwxz]{7,}.*\.[a-z]+$\N}}
484 log_message = random HELO
485 set acl_c_scr = ${eval:$acl_c_scr+5}
488 drop !hosts = +debianhosts
489 log_message = mail from non-d.o host
490 message = Interesting. I doubt that should have happened.
493 # Implicit, but simpler to just say it
496 #!!# ACL that is used after the RCPT command on the submission port
499 # Accept if the source is local SMTP (i.e. not over TCP/IP).
500 # We do this by testing for an empty sending host field.
501 accept hosts = +debianhosts
503 <%- if @is_mailrelay -%>
504 accept verify = certificate
507 # Defer after too many bad RCPT TO's. Legit MTAs will retry later.
508 # This is a rough pass at preventing address harvesting or other mail blasts.
510 defer log_message = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
511 message = Too many bad recipients, try again later
512 condition = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
515 ratelimit = 5 / 60m / per_rcpt / $sender_host_address
516 !hosts = +debianhosts
517 message = sorry, only 5 reports per hour for submission
519 accept domains = +local_domains
524 <%- if @is_mailrelay -%>
525 accept domains = +mailhubdomains
527 verify = recipient/callout=30s,defer_ok,use_sender,no_cache
530 accept domains = +submission_domains
534 deny message = relay not permitted
536 #!!# ACL that is used after the RCPT command
539 <%- if @is_mailrelay -%>
540 accept verify = certificate
543 accept hosts = <; ::1 ; 127.0.0.1 ; @
544 warn acl = acl_getprofile
545 condition = ${if eq{$acl_m_prf}{}}
546 set acl_m_prf = $acl_m_rprf
548 defer condition = ${if eq{$acl_m_prf}{$acl_m_rprf}{no}{yes}}
549 message = Different profile, please retry
550 log_message = Only one profile at a time, please
552 # Defer after too many bad RCPT TO's. Legit MTAs will retry later.
553 # This is a rough pass at preventing address harvesting or other mail blasts.
555 defer log_message = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
556 !acl = acl_spamlovers
557 message = Too many bad recipients, try again later
558 !hosts = +debianhosts
559 condition = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
561 # Dump spambots that are so stupid they say helo as our IP address
563 drop !hosts = +debianhosts
564 !acl = acl_spamlovers
565 condition = ${if eq {$sender_helo_name}{$interface_address}{yes}{no}}
566 message = HELO mismatch Forged HELO for ($sender_helo_name)
568 # Also for spambots that say helo as us or one of our domains
570 drop !hosts = +debianhosts
571 !acl = acl_spamlovers
572 condition = ${if match_domain{$sender_helo_name}{+ourself_and_handled}}
573 condition = ${if !match{$sender_host_name}{${rxquote:$sender_helo_name}\N$\N}}
574 message = HELO mismatch Forged HELO for ($sender_helo_name)
576 # This logic gives you a list of commonly forged domains in helo to reject against
578 warn set acl_m_frg = ${lookup{$sender_helo_name} \
579 nwildlsearch{/etc/exim4/helo-check} \
580 {${if eq{$value}{}{$sender_helo_name}{$value}}}{}}
582 # This is a failsafe in case DNS fails - we defer instead of hard reject if they
583 # say helo as a name in the list but we can't look them up
585 defer !hosts = +debianhosts
586 !acl = acl_spamlovers
587 condition = ${if eq{$acl_m_frg}{}{no}{yes}}
588 condition = ${if eq{$sender_host_name}{}{yes}{no}}
589 condition = ${if eq{$host_lookup_failed}{1}{no}{yes}}
590 message = Access temporarily denied. Resolve failed PTR for $sender_host_address
592 # If DNS works, go ahead and reject them
594 drop !hosts = +debianhosts
595 !acl = acl_spamlovers
596 condition = ${if and { {!eq{$acl_m_frg}{}}{!match{$sender_host_name}{${rxquote:$acl_m_frg}\N$\N}}}{yes}{no}}
597 message = HELO mismatch Forged HELO for ($sender_helo_name)
599 # disabled accounts don't even get local mail.
600 deny domains = +virtual_domains
601 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}\
602 {${lookup{${extract{1}{-}{$local_part}}}lsearch{${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}{true}{false}}}\
604 message = ${lookup{${extract{1}{-}{$local_part}}}lsearch{${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}{$value}}
606 deny local_parts = lsearch;/var/lib/misc/$primary_hostname/mail-disable
607 domains = +local_domains
608 message = ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-disable}{$value}}
610 deny domains = +virtual_domains
611 local_parts = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
612 {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
614 hosts = !+debianhosts
615 message = mail for <$local_part@$domain> only accepted from debian.org machines
617 # Accept if the source is local SMTP (i.e. not over TCP/IP).
618 # We do this by testing for an empty sending host field.
621 deny domains = +handled_domains
622 local_parts = ^[.] : ^.*[@%!/|]
624 deny domains = !+handled_domains
625 local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
627 deny condition = ${lookup{$sender_address_local_part}lsearch{/etc/exim4/localusers}{true}}
628 sender_domains= +local_domains
629 hosts = !+debianhosts
630 message = mail from <$sender_address> not allowed externally
632 deny sender_domains= +virtual_domains
633 condition = ${if exists {${extract{directory}{VSENDERDOMAINDATA}{${value}/localusers}}}}
634 condition = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VSENDERDOMAINDATA}{${value}/localusers}}}{true}}
635 hosts = !+debianhosts
636 message = mail from <$sender_address> not allowed externally
638 deny condition = ${if match_domain{$sender_address_domain}{+virtual_domains}{1}{0}}
639 condition = ${if exists {${extract{directory}{VSENDERDOMAINDATA}{${value}/neversenders}}}{1}{0}}
640 condition = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VSENDERDOMAINDATA}{${value}/neversenders}}}{true}}
641 message = no mail should ever come from <$sender_address>
643 warn condition = ${if eq{$acl_m_prf}{localonly}}
644 set acl_m_lrc = ${if eq{$acl_m_lrc}{}{$local_part@$domain}{$acl_m_lrc, $local_part@$domain}}
646 <%- if @is_packagesmaster -%>
647 warn condition = ${if eq {$acl_m_prf}{PackagesMail}}
648 condition = ${if eq {$sender_address}{$local_part@$domain}}
649 message = X-Packages-FromTo-Same: yes
652 deny condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
655 defer !hosts = +debianhosts
656 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
657 condition = ${if >{${eval:$acl_c_scr+0}}{0}}
658 ratelimit = 10 / 60m / per_rcpt / $sender_host_address
659 message = slow down (no reverse dns, mismatched ehlo, dialup, or in blacklists)
661 <%- if has_variable?("policydweight") && @policydweight -%>
662 # Check with policyd-weight - this only works with a version after etch's,
663 # sadly. etch's version attempts to hold the socket open, since that's what
664 # postfix expects. Exim, on the other hand, expects the remote side to close
665 # the socket when it's finished sending data, so it see each transaction as
666 # an incomplete read. I'm sure there's a way we could force Exim to do
667 # something sick and clever to force either the interpretation or the socket
668 # closure, but I'm fairly sure it's now worth it, since the backport of
669 # policyd-weight is trivial.
670 warn !hosts = +debianhosts
671 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
672 set acl_m_pw = ${readsocket{inet:127.0.0.1:12525}\
673 {request=smtpd_access_policy\n\
674 protocol_state=RCPT\n\
675 protocol_name=${uc:$received_protocol}\n\
676 helo_name=$sender_helo_name\n\
677 queue_id=$message_exim_id\n\
678 sender=$sender_address\n\
679 recipient=$local_part@$domain\n\
680 recipient_count=$rcpt_count\n\
681 client_address=$sender_host_address\n\
682 client_name=$sender_host_name\n\
683 reverse_client_name=$sender_host_name\n\
684 instance=$sender_host_address.$sender_address.$sender_helo_name\n\n}\
685 {20s}{\n}{socket failure}}
687 # Defer on socket error
688 defer !hosts = +debianhosts
689 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
690 condition = ${if eq{$acl_m_pw}{socket failure}{yes}{no}}
691 message = Cannot connect to policyd-weight. Please try again later.
693 # Set proposed action to $acl_m_act and message to $acl_m_mes
694 warn !hosts = +debianhosts
695 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
696 set acl_m_mes = ${extract{action}{$acl_m_pw}}
697 set acl_m_act = ${sg{$acl_m_pw}{\Naction=[^ ]+ (.*)\n\n\N}{\$1}}
699 # Add X-policyd-weight header line to message
700 warn !hosts = +debianhosts
701 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
703 condition = ${if eq{$acl_m_act}{PREPEND}{yes}{no}}
705 # Write log message, if policyd-weight can't run checks
706 warn !hosts = +debianhosts
707 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
708 log_message = policyd-weight message: $acl_m_mes
709 condition = ${if eq{$acl_m_act}{DUNNO}{yes}{no}}
711 # Deny mails which policyd-weight thinks are spam
712 deny !hosts = +debianhosts
713 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
714 message = policyd-weight said: $acl_m_mes
715 condition = ${if eq{$acl_m_act}{550}{yes}{no}}
717 # Defer messages when policyd-weight suggests so.
718 defer !hosts = +debianhosts
719 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
720 message = policyd-weight said: $acl_m_mes
721 condition = ${if eq{$acl_m_act}{450}{yes}{no}}
724 <%- if @is_rtmaster -%>
725 warn condition = ${if eq{$acl_m_prf}{RTMail}}
726 set acl_m12 = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}{match{$local_part}{3520}}{match{$local_part}{3645}}} {RTMailRecipientHasSubaddress}}}}
727 # temporary hack because weasel screwed up and gave people an rt-3520@ address, which doesn't really work normally. and rt-3645
728 #set acl_m12 = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}} {RTMailRecipientHasSubaddress}}}}
732 <%- if has_variable?("greylistd") && @greylistd -%>
734 message = $sender_host_address is not yet authorized to deliver mail from <$sender_address> to <$local_part@$domain>.
735 log_message = greylisted.
736 local_parts = ${if match_domain{$domain}{+virtual_domains}\
737 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
738 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
739 {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}} : \
740 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}}}
742 !hosts = : +debianhosts : WHITELIST : \
743 ${if exists {/etc/greylistd/whitelist-hosts}\
744 {/etc/greylistd/whitelist-hosts}{}} : \
745 ${if exists {/var/lib/greylistd/whitelist-hosts}\
746 {/var/lib/greylistd/whitelist-hosts}{}}
747 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
749 domains = +handled_domains
750 condition = ${readsocket{/var/run/greylistd/socket}\
752 $sender_host_address \
754 $local_part@$domain}\
757 <%- elsif has_variable?("postgrey") && @postgrey -%>
758 # next three are greylisting, inspired by http://www.bebt.de/blog/debian/archives/2006/07/30/T06_12_27/index.html
759 # this adds acl_m_grey if there isn't one (so unique per message)
762 !hosts = : +debianhosts : WHITELIST
763 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
764 condition = ${if def:acl_m_grey {no}{yes}}
765 set acl_m_grey = $pid.$tod_epoch.$sender_host_port
767 # and defers the message if postgrey thinks it should be defered ...
770 !hosts = : +debianhosts : WHITELIST
771 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
773 domains = +handled_domains
774 local_parts = GREYLIST_LOCAL_PARTS
775 set acl_m_pgr = request=smtpd_access_policy\n\
776 protocol_state=RCPT\n\
777 protocol_name=${uc:$received_protocol}\n\
778 instance=${acl_m_grey}\n\
779 helo_name=${sender_helo_name}\n\
780 <%- if scope.call_function('versioncmp', [@lsbmajdistrelease, '8']) <= 0 -%>
781 client_address=${substr_-3:${mask:$sender_host_address/24}}\n\
783 client_address=${sender_host_address}\n\
785 client_name=${sender_host_name}\n\
786 sender=${sender_address}\n\
787 recipient=$local_part@$domain\n\n
788 set acl_m_pgr = ${sg{\
789 ${readsocket{/var/run/postgrey/socket}{$acl_m_pgr}\
790 {5s}{}{action=DUNNO}}\
792 message = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
793 log_message = greylisted.
794 condition = ${if eq{${uc:${substr{0}{5}{$acl_m_pgr}}}}{DEFER}}
796 # ... or adds a header with information about how long the delay was
799 !hosts = : +debianhosts : WHITELIST
800 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
802 domains = +handled_domains
803 local_parts = GREYLIST_LOCAL_PARTS
804 condition = ${if eq{${uc:${substr_0_7:$acl_m_pgr}}}{PREPEND}}
805 message = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
808 deny hosts = ${if exists{/etc/exim4/host_blacklist}{/etc/exim4/host_blacklist}{}}
809 message = I'm terribly sorry, but it seems you have been blacklisted
810 log_message = blacklisted IP
812 deny log_message = <$sender_address> is blacklisted
813 senders = ${if exists{/etc/exim4/blacklist}{/etc/exim4/blacklist}{}}
814 message = We have blacklisted <$sender_address>. Please stop mailing us
816 accept local_parts = +postmasterish
817 domains = +virtual_domains : +bsmtp_domains
819 <%- unless @use_smarthost -%>
820 deny message = host $sender_host_address is listed in $dnslist_domain; see $dnslist_text
821 dnslists = ${if match_domain{$domain}{+virtual_domains}\
822 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}\
823 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}{$value}{}}}{}}}\
824 {${lookup{$local_part}lsearch{/etc/exim4/rbllist}{$value}{}}}} : \
825 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rbl}{$value}{}}
826 domains = +handled_domains
827 !hosts = +debianhosts : WHITELIST
830 deny message = domain $sender_address_domain is listed in $dnslist_domain; see $dnslist_text
831 dnslists = ${if match_domain{$domain}{+virtual_domains}\
832 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}\
833 {${expand:${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}{$value}{}}}}{}}}\
834 {${expand:${lookup{$local_part}lsearch{/etc/exim4/rhsbllist}{$value}{}}}}} : \
835 ${expand:${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rhsbl}{$value}{}}}
836 domains = +handled_domains
837 !hosts = +debianhosts : WHITELIST
839 <%- unless @use_smarthost -%>
840 deny domains = +handled_domains
841 local_parts = ${if match_domain{$domain}{+virtual_domains}\
842 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}\
843 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}{$local_part}{}}}{}}}\
844 {${lookup{$local_part}lsearch{/etc/exim4/callout_users}{$local_part}{}}}} : \
845 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-callout}{$local_part}{}}
846 !hosts = +debianhosts : WHITELIST
847 !verify = sender/callout=90s,maxwait=300s
848 message = "Sender verification failed: $acl_verify_message"
851 <%- if @is_mailrelay -%>
852 accept domains = +mailhubdomains
854 verify = recipient/callout=30s,defer_ok,use_sender,no_cache
857 accept domains = +handled_domains
859 verify = recipient/defer_ok
861 accept hosts = +debianhosts
863 accept authenticated = *
865 deny message = relay not permitted
870 accept verify = certificate
871 accept hosts = +debianhosts
873 discard condition = ${if <{$message_size}{256000}}
874 condition = ${if eq {$acl_m_prf}{blackhole}}
875 set acl_m_srb = ${perl{surblspamcheck}}
876 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
877 log_message = discarded surbl message for $recipients
879 deny condition = ${if <{$message_size}{256000}}
880 condition = ${if eq {$acl_m_prf}{markup}{no}{yes}}
881 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
882 set acl_m_srb = ${perl{surblspamcheck}}
883 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
884 log_message = $acl_m_srb
887 warn condition = ${if <{$message_size}{256000}}
888 condition = ${if eq {$acl_m_prf}{markup}}
889 set acl_m_srb = ${perl{surblspamcheck}}
890 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
891 message = X-Surbl-Hit: $primary_hostname: $acl_m_srb
897 deny condition = ${if eq{$acl_m_prf}{localonly}}
898 message = mail for $acl_m_lrc is only accepted internally
903 #!!# ACL that is used after the DATA command
906 # Some people put from postmaster@something.debian.org in the From
907 # header. Take their crack pipe away.
908 drop condition = ${if match{${lc:$h_From:}}{\Npostmaster@([^.]+\.)?debian\.org\N}}
910 <%- if @is_rtmaster -%>
911 deny condition = ${if eq {$acl_m_prf}{RTMail}}
912 condition = ${if and{{!match {${lc:$rh_Subject:}} {debian rt}} \
913 {!match {${lc:$rh_Subject:]}} {\N\[rt.debian.org \N}} \
914 {!match {$acl_m12}{RTMailRecipientHasSubaddress}}}}
915 message = messages to the Request Tracker system require a subject tag or a subaddress
918 <%- if @is_packagesqamaster -%>
919 deny !hosts = +debianhosts
920 condition = ${if eq {$acl_m_prf}{PTSMail}}
921 condition = ${if def:h_X-PTS-Approved:{false}{true}}
922 message = messages to the PTS require an X-PTS-Approved header
925 deny condition = ${if eq {$acl_m_prf}{DBSignedMail}}
926 condition = ${if and {{!match {$message_body}{PGP MESSAGE}} \
927 {!match {$message_body}{PGP SIGNED MESSAGE}} \
928 {!match {$message_body}{PGP SIGNATURE}} \
929 {!match {$header_content-type:}{multipart/signed}} \
930 {!match {$header_content-type:}{pgp}} \
933 message = Mail to this address needs to be PGP-signed
935 accept verify = certificate
936 accept hosts = +debianhosts
938 deny condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
939 !verify = header_syntax
940 message = Invalid header syntax: $acl_verify_message
942 # RFC 822 and 2822 say that headers must be ASCII. This kinda emulates
943 # postfix's strict_7bit_headers option, but only checks a few common problem
944 # headers, as there doesn't appear to be an easy way to check them all.
946 condition = ${if or {{match {$rh_Subject:}{[\200-\377]}}\
947 {match {$rh_To:}{[\200-\377]}}\
948 {match {$rh_From:}{[\200-\377]}}\
949 {match {$rh_Cc:}{[\200-\377]}}}{true}{false}}
950 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
951 message = improper use of 8-bit data in message header: message rejected
954 condition = ${if match {$rh_Subject:}{[^[:print:]]\{8\}}{true}{false}}
955 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
956 message = Your mailer is not RFC 2047 compliant: message rejected
958 <%- if has_variable?("clamd") && @clamd -%>
959 discard condition = ${if eq {$acl_m_prf}{blackhole}}
960 <%- if scope.call_function('versioncmp', [@lsbmajdistrelease, '8']) <= 0 -%>
964 log_message = discarded malware message for $recipients
966 deny condition = ${if eq {$acl_m_prf}{markup}{no}{yes}}
967 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
968 <%- if scope.call_function('versioncmp', [@lsbmajdistrelease, '8']) <= 0 -%>
972 message = malware detected: $malware_name: message rejected
974 warn condition = ${if eq {$acl_m_prf}{markup}}
975 <%- if scope.call_function('versioncmp', [@lsbmajdistrelease, '8']) <= 0 -%>
979 message = X-malware detected: $malware_name
983 discard condition = ${if <{$message_size}{256000}}
984 condition = ${if eq {$acl_m_prf}{blackhole}}
985 set acl_m_srb = ${perl{surblspamcheck}}
986 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
987 log_message = discarded surbl message for $recipients
989 deny condition = ${if <{$message_size}{256000}}
990 condition = ${if eq {$acl_m_prf}{markup}{no}{yes}}
991 condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
992 set acl_m_srb = ${perl{surblspamcheck}}
993 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
994 log_message = $acl_m_srb
997 warn condition = ${if <{$message_size}{256000}}
998 condition = ${if eq {$acl_m_prf}{markup}}
999 set acl_m_srb = ${perl{surblspamcheck}}
1000 condition = ${if eq{$acl_m_srb}{false}{no}{yes}}
1001 message = X-Surbl-Hit: $primary_hostname: $acl_m_srb
1004 # Check header_sender except for survey@popcon.d.o
1005 deny condition = ${if eq{$acl_m_prf}{PopconMail}{false}{true}}
1006 !verify = header_sender
1007 message = No valid sender found in the From:, Sender: and Reply-to: headers
1009 <%- if @is_packagesmaster -%>
1010 deny message = Congratulations, you scored $spam_score points.
1011 log_message = spam: $spam_score points.
1012 condition = ${if eq {$acl_m_prf}{PackagesMail}}
1014 !verify = certificate
1015 !hosts = +debianhosts
1016 condition = ${if <{$message_size}{256000}}
1017 spam = pkg_user : true
1018 condition = ${if >{$spam_score_int}{59}}
1025 ######################################################################
1026 # REWRITE CONFIGURATION #
1027 ######################################################################
1033 \N^buildd_(.*)@fasolo\.debian\.org$\N buildd_$1@buildd.debian.org T
1034 *@debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1035 *@people.debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1036 #*@${primary_hostname} "${if exists{/etc/exim4/email-addresses}{${lookup{$1}lsearch{/etc/exim4/email-addresses}{$value}fail}}fail}" fFs
1039 #!!#######################################################!!#
1040 #!!# Here follow routers created from the old routers, #!!#
1041 #!!# for handling non-local domains. #!!#
1042 #!!#######################################################!!#
1048 ######################################################################
1049 # ROUTERS CONFIGURATION #
1050 # Specifies how addresses are handled #
1051 ######################################################################
1052 # ORDER DOES MATTER #
1053 # An address is passed to each in turn until it is accepted. #
1054 ######################################################################
1056 <%- if @is_mailrelay -%>
1058 driver = manualroute
1059 domains = +mailhubdomains
1060 transport = remote_smtp
1061 route_data = ${lookup{$domain}lsearch{/etc/exim4/manualroute}}
1062 require_files = /etc/exim4/manualroute
1066 debug_print = "R: bsmtp for $local_part@$domain"
1067 driver = manualroute
1068 domains = +bsmtp_domains
1069 require_files = /etc/exim4/bsmtp
1070 route_list = * ${extract{file}{\
1071 ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1075 # This router routes to remote hosts over SMTP by explicit IP address,
1076 # given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
1077 # require this facility, which is why it is enabled by default in Exim.
1079 debug_print = "R: ipliteral for $local_part@$domain"
1081 domains = !+handled_domains
1082 transport = remote_smtp
1083 ignore_target_hosts = +reservedaddrs
1085 <%- if @use_smarthost -%>
1087 debug_print = "R: smarthost for $local_part@$domain"
1088 driver = manualroute
1089 domains = !+handled_domains
1090 transport = remote_smtp_smarthost
1091 route_list = * <%= @smarthost %>
1092 host_find_failed = defer
1093 same_domain_copy_routing = yes
1097 # This router routes to remote hosts over SMTP using a DNS lookup.
1098 # Ignore reserved network responses, including localhost.
1100 debug_print = "R: dnslookup for $local_part@$domain"
1102 domains = !+handled_domains
1103 transport = remote_smtp
1104 ignore_target_hosts = +reservedaddrs
1108 debug_print = "R: postmasterish for $local_part@$domain"
1113 local_parts = +postmasterish
1114 domains = +virtual_domains : +bsmtp_domains
1115 data = debian-admin@debian.org
1116 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1118 # This router handles aliasing using a traditional /etc/aliases file.
1119 # If any of your aliases expand to pipes or files, you will need to set
1120 # up a user and a group for these deliveries to run under. You can do
1121 # this by uncommenting the "user" option below (changing the user name
1122 # as appropriate) and adding a "group" option if necessary.
1125 debug_print = "R: system_aliases for $local_part@$domain"
1129 data = ${lookup{$local_part}lsearch*{/etc/aliases}}
1130 domains = +local_domains
1131 file_transport = address_file
1132 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1133 pipe_transport = address_pipe
1134 retry_use_local_part
1136 # This router handles forwarding using traditional .forward files.
1137 # It also allows mail filtering when a forward file starts with the
1138 # string "# Exim filter": to disable filtering, uncomment the "filter"
1139 # option. The check_ancestor option means that if the forward file
1140 # generates an address that is an ancestor of the current one, the
1141 # current one gets passed on instead. This covers the case where A is
1142 # aliased to B and B has a .forward file pointing to A.
1144 # For standard Debian setup of one group per user, it is acceptable---normal
1145 # even---for .forward to be group writable. If you have everyone in one
1146 # group, you should comment out the "modemask" line. Without it, the Exim
1147 # default of 022 will apply, which is probably what you want.
1150 debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1155 directory_transport = address_directory
1156 domains = +local_domains
1157 # filter - I have disabled filtering to force users to use .forward-foo files
1158 # or procmail. This will make it easier to move mailers in the future
1160 # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1161 # also checks if the .forward-bar exists, if not then it uses
1162 # .forward-default instead.
1163 file = $home/.forward\
1164 ${if eq{}{$local_part_suffix}{}{\
1165 ${if exists {${home}/.forward${local_part_suffix}} \
1166 {${local_part_suffix}}{-default}}\
1169 file_transport = address_file
1170 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1171 local_part_suffix = -*
1172 local_part_suffix_optional
1174 pipe_transport = address_pipe
1175 reply_transport = address_reply
1176 require_files = $home
1177 router_home_directory = ${lookup passwd{$local_part}{${extract{5}{:}{$value}}}fail}
1180 # This is a sendmailesque alias file lookup
1182 debug_print = "R: virt_aliases for $local_part@$domain"
1186 data = ${if exists{\
1187 ${extract{directory}{VDOMAINDATA}{${value}/aliases}}}\
1188 {${lookup{$local_part}lsearch*{\
1189 ${extract{directory}{VDOMAINDATA}{$value/aliases}}\
1191 directory_transport = address_directory
1192 domains = +virtual_domains
1193 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1194 cannot_route_message = Unknown user
1195 group = ${extract{group}{VDOMAINDATA}}
1196 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1197 pipe_transport = address_pipe
1198 qualify_preserve_domain
1199 retry_use_local_part
1200 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1201 transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1202 user = ${extract{user}{VDOMAINDATA}}
1204 # No direct match, so try doing a regex match if there's an
1207 debug_print = "R: virt_aliases_regex for $local_part$local_part_suffix@$domain"
1211 data = ${if exists{\
1212 ${extract{directory}{VDOMAINDATA}{${value}/aliases.regex}}}\
1213 {${lookup{$local_part}nwildlsearch*{\
1214 ${extract{directory}{VDOMAINDATA}{$value/aliases.regex}}\
1216 directory_transport = address_directory
1217 domains = +virtual_domains
1218 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1219 cannot_route_message = Unknown user
1220 group = ${extract{group}{VDOMAINDATA}}
1221 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1222 pipe_transport = address_pipe
1223 qualify_preserve_domain
1224 retry_use_local_part
1225 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1226 transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1227 user = ${extract{user}{VDOMAINDATA}}
1230 debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1234 directory_transport = address_directory
1235 domains = +local_domains
1236 # filter - I have disabled filtering to force users to use .forward-foo files
1237 # or procmail. This will make it easier to move mailers in the future
1239 # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1240 # also checks if the .forward-bar exists, if not then it uses
1241 # .forward-default instead.
1242 file = $home/.forward\
1243 ${if eq{}{$local_part_suffix}{}{\
1244 ${if exists {${home}/.forward${local_part_suffix}} \
1245 {${local_part_suffix}}{-default}}\
1248 file_transport = address_file
1249 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1250 local_part_suffix = -*
1251 local_part_suffix_optional
1253 pipe_transport = address_pipe
1254 reply_transport = address_reply
1255 require_files = $home
1258 # This delivers to procmail
1260 debug_print = "R: procmail for $local_part@$domain"
1263 domains = +local_domains
1264 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1265 local_part_suffix = -*
1266 local_part_suffix_optional
1269 require_files = $local_part:$home/.procmailrc
1270 transport = procmail_pipe
1271 transport_current_directory = $home
1273 # This driver delivers to the LDAP generated alias file.
1275 debug_print = "R: ldap_aliases for $local_part@$domain"
1279 data = ${if exists{/var/lib/misc/$primary_hostname/user-forward.cdb}\
1280 {${lookup{$local_part}cdb\
1281 {/var/lib/misc/$primary_hostname/user-forward.cdb}}}}
1282 domains = +local_domains
1283 file_transport = address_file
1284 local_part_suffix = -*
1285 local_part_suffix_optional
1286 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1287 pipe_transport = address_pipe
1288 retry_use_local_part
1290 # This director matches local user mailboxes.
1292 debug_print = "R: localuser for $local_part@$domain"
1295 domains = +local_domains
1296 local_part_suffix = -*
1297 local_part_suffix_optional
1298 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1299 # Disable if the user has never logged in
1300 require_files = $home
1301 transport = local_delivery
1304 # Now we begin the Virtual Domain configuration
1305 # Everything before here should apply only to the local domains with a
1308 <%- if @is_packagesmaster -%>
1309 # This router delivers for packages.d.o
1311 debug_print = "R: packages for $local_part@$domain"
1313 file_transport = address_file
1314 pipe_transport = address_pipe
1315 domains = packages.debian.org
1316 require_files = /srv/packages.debian.org/conf/maintainer
1317 data = ${lookup{$local_part}cdb{/srv/packages.debian.org/conf/maintainer.cdb}}
1318 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1319 transport_home_directory = /srv/packages.debian.org/mail
1320 transport_current_directory = /srv/packages.debian.org/mail
1322 retry_use_local_part
1326 <%- if @is_rtmaster -%>
1327 # This router delivers for rt.d.o
1328 rt_force_new_verbose:
1329 debug_print = "R: rt for $local_part+new@$domain"
1331 domains = rt.debian.org
1332 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1333 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1334 local_part_suffix = +new
1335 pipe_transport = rt_pipe
1336 data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1337 headers_remove = Subject
1338 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?is)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1340 # FIXME: figure out how to generalize this approach so that all of the following would work
1341 # - rt+NNNN@rt.debian.org : attach correspondence to ticket (verbose)
1342 # - rt+NNNN-quiesce@rt.debian.org : attach correspondence to ticket (quiesce)
1343 # - rt+NNNN-<action>@rt.debian.org : attach correspondence to ticket (some action)
1344 # requires modification to custom condition in 'scrips'
1345 rt_force_new_quiesce:
1346 debug_print = "R: rt for $local_part+new-quiesce@$domain"
1348 domains = rt.debian.org
1349 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1350 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1351 local_part_suffix = +new-quiesce
1352 pipe_transport = rt_pipe
1353 data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1354 headers_remove = Subject
1355 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nX-RT-Mode: quiesce\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?is)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1358 debug_print = "R: rt for $local_part@$domain"
1360 domains = rt.debian.org
1361 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1362 local_parts = ${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1363 local_part_suffix = +*
1364 local_part_suffix_optional
1365 pipe_transport = rt_pipe
1366 data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --extension ticket --action ${if match{$local_part}{.*-comment.*}{comment}{${if match{$local_part}{.*-done.*}{correspond-resolve}{correspond}}}}"
1367 headers_remove = Subject
1368 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1371 # Exim fails the router if it can't change to the user/group for delivery
1372 # during verification. So we have to seperate the cases of verifying
1373 # the virts, and delivering to them. blah.
1376 debug_print = "R: virt_direct for $local_part@$domain"
1382 directory_transport = address_directory
1383 domains = +virtual_domains
1384 local_part_suffix = -*
1385 local_part_suffix_optional
1386 file = $home/.forward-\
1387 ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1389 file_transport = address_file
1390 pipe_transport = address_pipe
1391 reply_transport = address_reply
1392 retry_use_local_part
1393 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1394 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1397 # This is a qmailesque deliver into a directory of .forward files
1399 debug_print = "R: virt_direct for $local_part@$domain"
1405 directory_transport = address_directory
1406 domains = +virtual_domains
1407 file = $home/.forward-\
1408 ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1410 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1411 group = ${extract{group}{VDOMAINDATA}}
1412 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1414 local_part_suffix = -*
1415 local_part_suffix_optional
1416 pipe_transport = address_pipe
1417 reply_transport = address_reply
1418 retry_use_local_part
1419 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1420 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1422 user = ${extract{user}{VDOMAINDATA}}
1423 #debug_print = .forward-${if exists {${home}/.forward-${local_part}} {${local_part}} {default}}
1425 # This router delivers to the LDAP generated mail-forward file.
1426 # It's only really useful for debian.org
1428 debug_print = "R: virt_users for $local_part@$domain"
1432 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1433 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1434 user = ${extract{user}{VDOMAINDATA}}
1435 group = ${extract{group}{VDOMAINDATA}}
1436 # Manually construct the forwarding address, preserving the
1437 # local_part_suffix if the remote host is master.
1438 data = ${if and {{exists{${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}\
1439 {! eq {${lookup{$local_part}cdb\
1440 {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}\
1442 {${local_part:${lookup{$local_part}cdb\
1443 {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}\
1444 ${if eq {${domain:${lookup{$local_part}cdb\
1445 {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}{master.debian.org}{$local_part_suffix} {}}\
1447 ${domain:${lookup{$local_part}cdb\
1448 {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}}
1449 domains = +virtual_domains
1450 file_transport = address_file
1451 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1452 pipe_transport = address_pipe
1453 local_part_suffix = -*
1454 local_part_suffix_optional
1455 retry_use_local_part
1460 domain = 'bugs.debian.org'
1462 # This router delivers for bugs.d.o
1464 debug_print = "R: bugs for $local_part@$domain"
1466 transport = bugs_pipe
1467 domains = ' + domain + '
1468 cannot_route_message = Unknown or archived bug
1469 require_files = /srv/bugs.debian.org/mail/run-procmail
1471 local_parts = ${if match\
1473 {\N^(\d+)(\d{2})(?:-(?:(?:submit|maintonly|quiet|forwarded|done|close|request|submitter)|(?:unsubscribe|ignore|help|(?:sub(?:scribe|help|yes|approve|reject))|unsubyes|bounce|probe|approve|reject|setlistyes|setlistsilentyes).*))?$\N}\
1474 {${if exists{/srv/bugs.debian.org/spool/db-h/$2/$1$2.summary}\
1475 {$local_part}fail}}fail}
1480 ######################################################################
1481 # TRANSPORTS CONFIGURATION #
1482 ######################################################################
1483 # ORDER DOES NOT MATTER #
1484 # Only one appropriate transport is called for each delivery. #
1485 ######################################################################
1490 # This transport is used for local delivery to user mailboxes. On Debian
1491 # systems group mail is used so we can write to the /var/mail
1492 # directory. (The alternative, which most other unixes use, is to deliver
1493 # as the user's own group, into a sticky-bitted directory)
1496 file = /var/mail/${local_part}
1499 no_mode_fail_narrower
1502 # This transport is used for handling pipe addresses generated by alias
1503 # or .forward files. It has a conventional name, since it is not actually
1504 # mentioned elsewhere in this configuration file. (A different name *can*
1505 # be specified via the "address_pipe_transport" option if you really want
1506 # to.) If the pipe generates any standard output, it is returned to the sender
1507 # of the message as a delivery error. Set return_fail_output instead if you
1508 # want this to happen only when the pipe fails to complete normally.
1512 current_directory = ${home}
1513 environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1514 EXT=${substr_1:${local_part_suffix}}:\
1515 LOCAL=${local_part}${local_part_suffix}:\
1516 RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1520 # This transport is used for handling file addresses generated by alias
1521 # or .forward files. It has a conventional name, since it is not actually
1522 # mentioned elsewhere in this configuration file.
1532 directory_mode = 0770
1533 mode_fail_narrower = false
1535 # This transport is used for handling file addresses generated by alias
1536 # or .forward files if the path ends in "/", which causes it to be treated
1537 # as a directory name rather than a file name. Each message is then delivered
1538 # to a unique file in the directory. If instead you want all such deliveries to
1539 # be in the "maildir" format that is used by some other mail software,
1540 # uncomment the final option below. If this is done, the directory specified
1541 # in the .forward or alias file is the base maildir directory.
1543 # Should you want to be able to specify either maildir or non-maildir
1544 # directory-style deliveries, then you must set up yet another transport,
1545 # called address_directory2. This is used if the path ends in "//" so should
1546 # be the one used for maildir, as the double slash suggests another level
1547 # of directory. In the absence of address_directory2, paths ending in //
1548 # are passed to address_directory.
1558 # This transport is used for handling autoreplies generated by the filtering
1559 # option of the forwardfile director. It has a conventional name, since it
1560 # is not actually mentioned elsewhere in this configuration file.
1564 # This transport is used for delivering messages over SMTP connections.
1568 connect_timeout = 15s
1569 delay_after_cutoff = false
1570 tls_certificate = /etc/exim4/ssl/thishost.crt
1571 tls_privatekey = /etc/exim4/ssl/thishost.key
1573 <%- if @use_smarthost -%>
1574 remote_smtp_smarthost:
1575 debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
1577 delay_after_cutoff = false
1578 port = <%= @smarthost_port %>
1579 tls_tempfail_tryclear = false
1580 hosts_require_tls = <%= @smarthost %>
1581 tls_certificate = /etc/exim4/ssl/thishost.crt
1582 tls_privatekey = /etc/exim4/ssl/thishost.key
1584 # Send the message to procmail
1587 command = /usr/bin/procmail -a ${substr_1:${local_part_suffix}}
1589 user = ${local_part}
1598 user = ${extract{user}{\
1599 ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1603 <%- if @is_bugsmx -%>
1606 command = /srv/bugs.debian.org/mail/run-procmail
1607 environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1608 EXT=${substr_1:${local_part_suffix}}:\
1609 LOCAL=${local_part}${local_part_suffix}:\
1610 RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1616 <%- if @is_rtmaster -%>
1618 debug_print = "T: rt_pipe for $local_part${local_part_suffix}@$domain"
1621 environment = EXTENSION=${substr_1:${local_part_suffix}}
1622 allow_commands = /usr/bin/rt-mailgate
1626 ######################################################################
1627 # RETRY CONFIGURATION #
1628 ######################################################################
1630 # This single retry rule applies to all domains and all errors. It specifies
1631 # retries every 15 minutes for 2 hours, then increasing retry intervals,
1632 # starting at 2 hours and increasing each time by a factor of 1.5, up to 16
1633 # hours, then retries every 8 hours until 4 days have passed since the first
1636 # Domain Error Retries
1637 # ------ ----- -------
1642 debian.org * F,2h,10m; G,16h,2h,1.5; F,14d,8h
1643 * * senders=: F,2h,10m
1644 * rcpt_4xx F,2h,5m; F,4h,10m; F,4d,15m
1645 * * F,2h,15m; G,16h,2h,1.5; F,4d,8h
1647 # End of Exim 4 configuration