modules/exim/templates/eximconf.erb

   1 ##
   2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
   3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
   4 ##
   5
   6 # This is the main exim4 configuration file based on the 28.08.05 version by
   7 # ametzler
   8
   9 # The configuration file uses a set of rules to generate an
  10 # acceptable mail environment for debian.org machines. It deviates
  11 # considerably from what could be considered a standard exim configuration.
  12
  13 # This configuration file brings in the necessary information from
  14 # other databases stored in /etc/exim4/ and the files distributed by ud-ldap
  15
  16 # This file is independent of the local host, it should not be changed
  17 # per machine. primary_hostname is used in all places that require per-host
  18 # settings.
  19
  20 # The configuration files in /etc/exim4 are as follows:
  21 #  locals - This is a list of domains that are considered local. A local
  22 #           domain is essentially one for which deliveries to /var/mail
  23 #           will be attempted. The users available for local delivery
  24 #           come from /etc/passwd and /etc/aliases. Wildcards are not
  25 #           permitted.
  26 #  virtualdomains - This is a list of all virtual domains. A virtual domain
  27 #           is much like a local domain, execpt that the delivery location
  28 #           and allowed set of users is controlled by a virtual domain
  29 #           alias file and not /etc/passwd. Wildcards are permitted
  30 #  relayhosts - Hostnames that can send any arbitarily addressed mail to
  31 #           us. This is primarily only useful for emergency 'queue
  32 #           flushing' operations, but should be populated with a list
  33 #           of trusted machines. Wildcards are not permitted
  34 #  bsmtp_domains - Domains that we deliver locally via bsmtp
  35 <%- if @is_mailrelay -%>
  36 #  mailhubdomains - Domains for which we are the MX, but the mail is relayed
  37 #           elsewhere.  This is designed for use with small volume or
  38 #           restricted machines that need to use a smarthost for mail
  39 #           traffic.  We will relay for them based on ssl cert validation
  40 #           but we need to teach exim how to route the mail to them.  This is
  41 #           that list.
  42 <%- end -%>
  43
  44 # Exim's wildcard mechanism is a bit odd in that to say "any address in
  45 # debian.org including debian.org" you must use two patterns,
  46 #   *.debian.org
  47 #   debian.org
  48 # Also you can only place a * before a . and as the first char in a string.
  49 # Wildcards always match last so they may be used as a catchall.
  50
  51 # Further details can be found in each of the files.
  52
  53 # Usefull exim commands:
  54 #  exim4 -qf  - Try sending all messages right now, including frozen ones
  55 #  exim4 -bt foo@blah - Write what exim would do if it saw the address
  56 #                      Great for testing virtual domains and forward files
  57
  58 # Special Features for users:
  59 # .forward-foo - is understood as an extension address for bar-foo@cow.com
  60 # .forward-default - is understood to be a catch all for bar-*@cow.com
  61 # .procmailrc - with no .forward file invokes procmail for delivery
  62 #               automatically.
  63
  64 # For virtual domains the first lookup is done against a linear text
  65 # database called 'aliases', then .forward files are consulted. Exim
  66 # filtering is available for these .forward files only. .forward-default
  67 # is the universal catch all for everything not handled.
  68
  69 # Heuristic check (none bad enough to cause a hard reject, but in aggregate
  70 # will trigger things like rcpt to rate limiting or possibly a reject if
  71 # enough hits are triggered).
  72 #
  73 # value is stored in acl_c_scr
  74
  75 ######################################################################
  76 #                    MAIN CONFIGURATION SETTINGS                     #
  77 ######################################################################
  78
  79 <%- if @heavy -%>
  80  perl_startup = do '/etc/exim4/exim_surbl.pl'
  81 <%- end -%>
  82
  83 # These options specify the Access Control Lists (ACLs) that
  84 # are used for incoming SMTP messages - after the RCPT and DATA
  85 # commands, respectively.
  86
  87 acl_smtp_helo = check_helo
  88 acl_smtp_rcpt = ${if ={$interface_port}{587} {check_submission}{check_recipient}}
  89 acl_smtp_data = check_message
  90 <%- if @heavy -%>
  91 acl_smtp_mime = acl_check_mime
  92 <%- end -%>
  93 acl_smtp_predata = acl_check_predata
  94
  95 # accept domain literal syntax in e-mail addresses. To actually make use of
  96 # this a router is also required
  97 allow_domain_literals = true
  98
  99 # This setting defines a named domain list called
 100 # local_domains. It will be referenced
 101 # later on by the syntax "+local_domains".
 102 # Other domain and host lists may follow.
 103 # @ is the local FQDN, @[] matches the IP adress of any local interface.
 104
 105 domainlist local_domains = @ : \
 106     @[] : \
 107     localhost : \
 108     ${if exists {/etc/exim4/locals}{lsearch;/etc/exim4/locals}}
 109
 110 domainlist virtual_domains = partial-lsearch;/etc/exim4/virtualdomains
 111
 112 domainlist submission_domains = ${if exists {/etc/exim4/submission-domains}{/etc/exim4/submission-domains}{}}
 113
 114 domainlist bsmtp_domains = ${if exists {/etc/exim4/bsmtp}{partial-lsearch;/etc/exim4/bsmtp}{}}
 115
 116 domainlist handled_domains = +local_domains : +virtual_domains : +bsmtp_domains
 117
 118 domainlist ourself_and_handled = $primary_hostname : +handled_domains
 119
 120 localpartlist local_only_users = lsearch;/etc/exim4/localusers
 121
 122 localpartlist postmasterish = postmaster : abuse : hostmaster
 123
 124 hostlist debianhosts = <; ; 127.0.0.1 ; ::1 ; /var/lib/misc/thishost/debianhosts ; 89.16.166.49 ; 82.195.75.76 ; 2001:41b8:202:deb:bab5:0:52c3:4b4c
 125
 126 hostlist reservedaddrs = 0.0.0.0/8 : 127.0.0.0/8 : 10.0.0.0/8 : 169.254.0.0/16 : 172.16.0.0/12 : 192.0.0.0/24 : 192.168.0.0/16 : 224.0.0.0/4 : 240.0.0.0/5 : 248.0.0.0/5
 127
 128 <%- if @is_mailrelay -%>
 129 # Domains we relay for; that is domains that aren't considered local but we
 130 # accept mail for them.
 131 domainlist mailhubdomains = lsearch;/etc/exim4/manualroute
 132
 133 <%- end -%>
 134 tls_certificate = /etc/exim4/ssl/thishost.crt
 135 tls_privatekey = /etc/exim4/ssl/thishost.key
 136 tls_try_verify_hosts = *
 137 tls_verify_certificates = /etc/exim4/ssl/ca.crt
 138 tls_crl = /etc/exim4/ssl/ca.crl
 139
 140 # The setting below causes Exim to do a reverse DNS lookup on all incoming
 141 # IP calls, in order to get the true host name. If you feel this is too
 142 # expensive, you can specify the networks for which a lookup is done, or
 143 # remove the setting entirely.
 144 host_lookup = *
 145 # dns_ipv4_lookup = !localhost (disabled upon sgrans request, zobel, 2010-03-16)
 146
 147 # If this option is set, then any process that is running as one of the
 148 # listed users may pass a message to Exim and specify the sender's
 149 # address using the "-f" command line option, without Exim's adding a
 150 # "Sender" header.
 151
 152 untrusted_set_sender = *
 153
 154 # Some spam scanners (*cough* irritated *cough*) want the Sender field
 155 # to exist.  Appease them by not actually adding a Sender field.
 156
 157 local_from_check = false
 158
 159 # Some operating systems use the "gecos" field in the system password file
 160 # to hold other information in addition to users' real names. Exim looks up
 161 # this field when it is creating "sender" and "from" headers. If these options
 162 # are set, exim uses "gecos_pattern" to parse the gecos field, and then
 163 # expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
 164 # by the pattern.
 165
 166 gecos_pattern = ^([^,:]*)
 167 gecos_name = $1
 168
 169 # This tells exim to immediately discard error messages (ie double bounces).
 170 ignore_bounce_errors_after = 0s
 171 auto_thaw = 1d
 172 timeout_frozen_after=14d
 173
 174 message_size_limit = 100M
 175 message_logs = false
 176 smtp_accept_max_per_host = ${if match_ip {$sender_host_address}{+debianhosts}{0}{7}}
 177 <%- if @heavy -%>
 178 smtp_accept_max = 300
 179 smtp_accept_queue = 200
 180 smtp_accept_queue_per_connection = 50
 181 smtp_accept_reserve = 25
 182 <%- else -%>
 183 smtp_accept_max = 30
 184 smtp_accept_queue = 20
 185 smtp_accept_queue_per_connection = 10
 186 smtp_accept_reserve = 5
 187 <%- end -%>
 188 smtp_reserve_hosts = +debianhosts
 189
 190 split_spool_directory = true
 191 check_spool_inodes = 200
 192 check_spool_space  = 20M
 193
 194 delay_warning =
 195
 196 <%- if @heavy -%>
 197 message_body_visible = 5000
 198 queue_run_max = 50
 199 deliver_queue_load_max = 50
 200 queue_only_load = 35
 201 smtp_load_reserve = 20
 202 <%- else -%>
 203 queue_run_max = 5
 204 <%- if scope.lookupvar('::processorcount').to_s != 'undefined' -%>
 205 deliver_queue_load_max = <%= [scope.lookupvar('::processorcount').to_i,2].max * 5 %>
 206 queue_only_load = <%= [scope.lookupvar('::processorcount').to_i,2].max * 4 %>
 207 <%- else -%>
 208 deliver_queue_load_max = 10
 209 queue_only_load = 8
 210 <%- end -%>
 211 <%- end -%>
 212 queue_list_requires_admin = false
 213
 214 <%- if has_variable?("clamd") && @clamd -%>
 215 av_scanner = clamd:/var/run/clamav/clamd.ctl
 216 <%- end -%>
 217
 218 <%=
 219 ports = []
 220 out = "daemon_smtp_ports = "
 221 ports << 25
 222 if @mail_port  # if we have an overridden mail_port
 223   ports << @mail_port
 224 end
 225
 226 if @is_bugsmx
 227   ports << 587
 228 end
 229
 230 if @is_mailrelay
 231   ports << @smarthost_port
 232 end
 233
 234 out += ports.uniq.sort.join(" : ")
 235 out
 236 %>
 237
 238 admin_groups = adm
 239 remote_sort_domains = *.debian.org:*.debian.net
 240
 241 pipelining_advertise_hosts = !*
 242 tls_advertise_hosts = *
 243 smtp_enforce_sync = true
 244
 245 log_selector = +tls_cipher +tls_peerdn +queue_time +deliver_time +smtp_connection +smtp_incomplete_transaction +smtp_confirmation +smtp_protocol_error
 246
 247 received_header_text = Received: ${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
 248                                  {${if def:sender_ident {from ${quote_local_part:$sender_ident} }}${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
 249                                  ${if and {{eq {$tls_certificate_verified}{1}}{def:tls_peerdn}}{from $tls_peerdn (verified)\n\t}}\
 250                                  by $primary_hostname ${if def:received_protocol {with $received_protocol}} ${if def:tls_cipher {($tls_cipher)\n\t}}\
 251                                  (Exim $version_number)\n\t\
 252                                  ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}\
 253                                  id $message_exim_id${if def:received_for {\n\tfor $received_for}}
 254
 255 # macro definitions.
 256 # Do not wrap!
 257 VDOMAINDATA = ${lookup{$domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
 258 VSENDERDOMAINDATA = ${lookup{$sender_address_domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
 259 WHITELIST = ${if match_domain{$domain}{+virtual_domains}\
 260             {${if exists {${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}\
 261             {${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}{$value}{}}}{}}}\
 262             {/etc/exim4/whitelist} } : \
 263             ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-whitelist}{$value}{}}
 264 GREYLIST_LOCAL_PARTS = ${if match_domain{$domain}{+virtual_domains}\
 265                        {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
 266                        {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
 267                        {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}}}} : \
 268                        ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}
 269 <%- if @is_rtmaster -%>
 270 RT_QUEUE_MAP = /srv/rt.debian.org/mail/rt_queue_map
 271 <%- end -%>
 272
 273 keep_environment =
 274 add_environment =
 275
 276 ######################################################################
 277 #                        ACL CONFIGURATION                           #
 278 ######################################################################
 279 begin acl
 280
 281 acl_spamlovers:
 282   # There are a few profiles that don't want much smtp time checking of
 283   # mail.  It's easier to track them in one place
 284
 285   accept  condition      = ${if eq {$acl_m_prf}{PopconMail}}
 286   accept  condition      = ${if eq {$acl_m_prf}{BugsMail}}
 287   deny
 288
 289 acl_getprofile:
 290   # This is a bad hack to reset the variable, by defining it be something
 291   # never referenced.
 292
 293   warn    set acl_m_rprf = $acl_m_undefined
 294
 295   warn    recipients     = survey@popcon.debian.org
 296           set acl_m_rprf = PopconMail
 297
 298   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 299
 300   warn    local_parts    = +local_only_users
 301           domains        = +local_domains
 302           hosts          = !+debianhosts
 303           set acl_m_rprf = localonly
 304
 305 <%- if @is_mailrelay -%>
 306   warn    local_parts    = +local_only_users
 307           domains        = +mailhubdomains
 308           hosts          = !+debianhosts
 309           set acl_m_rprf = localonly
 310
 311 <%- end -%>
 312   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 313
 314 <%- if @is_rtmaster -%>
 315   warn    domains        = rt.debian.org
 316           set acl_m_rprf = RTMail
 317
 318   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 319
 320 <%- end -%>
 321 <%- if @is_bugsmx -%>
 322   warn    domains        = bugs.debian.org
 323           set acl_m_rprf = BugsMail
 324
 325   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 326
 327 <%- end -%>
 328 <%- if @is_packagesmaster -%>
 329   warn    domains        = packages.debian.org
 330           set acl_m_rprf = PackagesMail
 331
 332   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 333
 334 <%- end -%>
 335 <%- if @is_packagesqamaster -%>
 336   warn    recipients     = owner@packages.qa.debian.org : postmaster@packages.qa.debian.org
 337           set acl_m_rprf = PTSOwner
 338
 339   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 340
 341   warn    senders        = :
 342           domains        = packages.qa.debian.org
 343           condition      = ${if match{$local_part}{\N^bounces+\N}}
 344           set acl_m_rprf = PTSListBounce
 345
 346   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 347
 348   warn    domains        = packages.qa.debian.org
 349           set acl_m_rprf = PTSMail
 350
 351   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 352
 353 <%- end -%>
 354   warn    recipients     = change@db.debian.org : changes@db.debian.org : chpasswd@db.debian.org : ping@db.debian.org : recommend@nm.debian.org
 355           set acl_m_rprf = DBSignedMail
 356
 357   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 358
 359   warn    domains        = +virtual_domains
 360           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
 361           condition      = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{markup}}
 362           set acl_m_rprf = markup
 363
 364   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 365
 366   warn    domains        = +virtual_domains
 367           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
 368           condition      = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{blackhole}}
 369           set acl_m_rprf = blackhole
 370
 371   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 372
 373   warn    domains        = +virtual_domains
 374           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
 375           condition      = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{markup}}
 376           set acl_m_rprf = markup
 377
 378   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 379
 380   warn    domains        = +virtual_domains
 381           condition      = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
 382           condition      = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{blackhole}}
 383           set acl_m_rprf = blackhole
 384
 385   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 386
 387   warn    domains        = +local_domains
 388           condition      = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{markup}}
 389           set acl_m_rprf = markup
 390
 391   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 392
 393   warn    domains        = +local_domains
 394           condition      = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{blackhole}}
 395           set acl_m_rprf = blackhole
 396
 397   accept  condition      = ${if eq {$acl_m_rprf}{}{no}{yes}}
 398
 399   warn    set acl_m_rprf = normal
 400
 401   accept
 402
 403 check_helo:
 404
 405   warn    set acl_c_scr    = 0
 406
 407 <%- if @is_mailrelay -%>
 408   accept  verify   = certificate
 409
 410 <%- end -%>
 411 <%- unless @use_smarthost -%>
 412   # These are in HELO acl so that they are only run once.  They increment a counter,
 413   # so we don't want it to increment per rcpt to.
 414
 415   warn    dnslists       = list.dnswl.org&0.0.0.3
 416           log_message    = Hit on list.dnswl.org for $sender_host_address
 417           set acl_c_scr  = ${eval:$acl_c_scr-30}
 418
 419   warn    dnslists       = list.dnswl.org&0.0.0.2
 420           log_message    = Hit on list.dnswl.org for $sender_host_address
 421           set acl_c_scr  = ${eval:$acl_c_scr-20}
 422
 423   warn    dnslists       = list.dnswl.org
 424           log_message    = Hit on list.dnswl.org for $sender_host_address
 425           set acl_c_scr  = ${eval:$acl_c_scr-10}
 426
 427   warn    condition      = ${if isip {$sender_helo_name}{true}{false}}
 428           log_message    = remote host used IP address in HELO/EHLO greeting
 429           set acl_c_scr  = ${eval:$acl_c_scr+20}
 430
 431   warn    !hosts         = +debianhosts
 432           condition      = ${if eq{$host_lookup_failed}{1}}
 433           set acl_c_scr  = ${eval:$acl_c_scr+20}
 434
 435   warn    !hosts         = +debianhosts
 436           condition      = ${if eq{$host_lookup_failed}{0}}
 437           condition      = ${if match{$sender_host_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
 438           set acl_c_scr  = ${eval:$acl_c_scr+20}
 439
 440   warn    !hosts         = +debianhosts
 441           condition      = ${if match{$sender_helo_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
 442           set acl_c_scr  = ${eval:$acl_c_scr+20}
 443
 444   warn    !hosts         = +debianhosts
 445           dnslists       = dul.dnsbl.sorbs.net
 446           set acl_c_scr  = ${eval:$acl_c_scr+15}
 447
 448   # If the sender's helo name is empty, the message will be rejected later
 449   # because the helo is empty.  If the rDNS lookup failed, we are already
 450   # going to greylist them, so no sense worrying about it here.  Finally,
 451   # if rDNS does not match helo name (both lower cased first), greylist.
 452
 453   warn    !hosts         = +debianhosts
 454           condition      = ${if eq {$host_lookup_failed}{1}{no}{yes}}
 455           condition      = ${if def:sender_helo_name {yes}{no}}
 456           condition      = ${if eq {${lc:$sender_helo_name}}{${lc:$sender_host_name}}{no}{yes}}
 457           log_message    = HELO doesn't match rDNS
 458           set acl_c_scr  = ${eval:$acl_c_scr+8}
 459
 460   # Regexes of doom
 461   # matches 098325879 - looks fishy
 462
 463   warn condition        = ${if and { \
 464                                      { !match{$sender_helo_name}{\N^\[.+\]$\N} } \
 465                                      { !match{$sender_helo_name}{\N^(?i)((?=[^-])[a-z0-9-]*[a-z0-9]\.)+[a-z]{2,6}$\N} } \
 466                                     } \
 467                             }
 468        log_message      = non-FQDN HELO
 469        set acl_c_scr    = ${eval:$acl_c_scr+12}
 470
 471   # Matches DOMAIN99.com - looks bad
 472
 473   warn condition       = ${if match {$sender_helo_name}{\N^[A-Z]+[A-Z0-9\-]+\.[A-Za-z0-9]+$\N}}
 474        log_message     = SHOUTING HELO
 475        set acl_c_scr   = ${eval:$acl_c_scr+7}
 476
 477   # Random HELO (run of 7 consonants) (constructed by viruses).  We purposefully
 478   # skip matching on machines named .*smtp.*, since that's 4 already.  This is a fairly
 479   # naive test, so it's not worth much
 480
 481   warn condition       = ${if match {${lc:$sender_helo_name}}{smtp}{no}{yes}}
 482        condition       = ${if match {${lc:$sender_helo_name}}{\N^[a-z0-9]+\.[a-z]+$\N}}
 483        condition       = ${if match {${lc:$sender_helo_name}}{\N.*[bcdfghjklmnpqrstvwxz]{7,}.*\.[a-z]+$\N}}
 484        log_message     = random HELO
 485        set acl_c_scr   = ${eval:$acl_c_scr+5}
 486
 487 <%- else -%>
 488   drop !hosts          = +debianhosts
 489        log_message     = mail from non-d.o host
 490        message         = Interesting.  I doubt that should have happened.
 491
 492 <%- end -%>
 493   # Implicit, but simpler to just say it
 494   accept
 495
 496 #!!# ACL that is used after the RCPT command on the submission port
 497 check_submission:
 498
 499   # Accept if the source is local SMTP (i.e. not over TCP/IP).
 500   # We do this by testing for an empty sending host field.
 501   accept  hosts = +debianhosts
 502
 503 <%- if @is_mailrelay -%>
 504   accept  verify   = certificate
 505
 506 <%- end -%>
 507   # Defer after too many bad RCPT TO's.  Legit MTAs will retry later.
 508   # This is a rough pass at preventing address harvesting or other mail blasts.
 509
 510   defer  log_message   = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
 511          message       = Too many bad recipients, try again later
 512          condition     = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
 513
 514   defer
 515           ratelimit      = 5 / 60m / per_rcpt / $sender_host_address
 516           !hosts         = +debianhosts
 517           message        = sorry, only 5 reports per hour for submission
 518
 519   accept  domains  = +local_domains
 520           hosts    = +debianhosts
 521           endpass
 522           verify   = recipient
 523
 524 <%- if @is_mailrelay -%>
 525   accept  domains  = +mailhubdomains
 526           endpass
 527           verify   = recipient/callout=30s,defer_ok,use_sender,no_cache
 528
 529 <%- end -%>
 530   accept  domains  = +submission_domains
 531           endpass
 532           verify   = recipient
 533
 534   deny    message = relay not permitted
 535
 536 #!!# ACL that is used after the RCPT command
 537 check_recipient:
 538
 539 <%- if @is_mailrelay -%>
 540   accept  verify   = certificate
 541
 542 <%- end -%>
 543   accept  hosts = <; ::1 ; 127.0.0.1 ; @
 544   warn    acl           = acl_getprofile
 545           condition     = ${if eq{$acl_m_prf}{}}
 546           set acl_m_prf = $acl_m_rprf
 547
 548   defer   condition     = ${if eq{$acl_m_prf}{$acl_m_rprf}{no}{yes}}
 549           message       = Different profile, please retry
 550           log_message   = Only one profile at a time, please
 551
 552   # Defer after too many bad RCPT TO's.  Legit MTAs will retry later.
 553   # This is a rough pass at preventing address harvesting or other mail blasts.
 554
 555   defer  log_message   = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
 556          !acl          = acl_spamlovers
 557          message       = Too many bad recipients, try again later
 558          !hosts        = +debianhosts
 559          condition     = ${if > {${eval:$rcpt_fail_count}}{3}{yes}{no}}
 560
 561   # Dump spambots that are so stupid they say helo as our IP address
 562
 563   drop   !hosts        = +debianhosts
 564          !acl          = acl_spamlovers
 565          condition     = ${if eq {$sender_helo_name}{$interface_address}{yes}{no}}
 566          message       = HELO mismatch Forged HELO for ($sender_helo_name)
 567
 568   # Also for spambots that say helo as us or one of our domains
 569
 570   drop   !hosts        = +debianhosts
 571          !acl          = acl_spamlovers
 572          condition     = ${if match_domain{$sender_helo_name}{+ourself_and_handled}}
 573          condition     = ${if !match{$sender_host_name}{${rxquote:$sender_helo_name}\N$\N}}
 574          message       = HELO mismatch Forged HELO for ($sender_helo_name)
 575
 576   # This logic gives you a list of commonly forged domains in helo to reject against
 577
 578   warn set acl_m_frg   = ${lookup{$sender_helo_name} \
 579                            nwildlsearch{/etc/exim4/helo-check} \
 580                           {${if eq{$value}{}{$sender_helo_name}{$value}}}{}}
 581
 582   # This is a failsafe in case DNS fails - we defer instead of hard reject if they
 583   # say helo as a name in the list but we can't look them up
 584
 585   defer  !hosts        = +debianhosts
 586          !acl          = acl_spamlovers
 587          condition     = ${if eq{$acl_m_frg}{}{no}{yes}}
 588          condition     = ${if eq{$sender_host_name}{}{yes}{no}}
 589          condition     = ${if eq{$host_lookup_failed}{1}{no}{yes}}
 590          message       = Access temporarily denied. Resolve failed PTR for $sender_host_address
 591
 592   # If DNS works, go ahead and reject them
 593
 594   drop   !hosts        = +debianhosts
 595          !acl          = acl_spamlovers
 596          condition     = ${if and { {!eq{$acl_m_frg}{}}{!match{$sender_host_name}{${rxquote:$acl_m_frg}\N$\N}}}{yes}{no}}
 597          message       = HELO mismatch Forged HELO for ($sender_helo_name)
 598
 599   # disabled accounts don't even get local mail.
 600   deny   domains       = +virtual_domains
 601          condition    = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}\
 602                                      {${lookup{${extract{1}{-}{$local_part}}}lsearch{${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}{true}{false}}}\
 603                                      {}}
 604          message       = ${lookup{${extract{1}{-}{$local_part}}}lsearch{${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}{$value}}
 605
 606   deny   local_parts   = lsearch;/var/lib/misc/$primary_hostname/mail-disable
 607          domains       = +local_domains
 608          message       = ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-disable}{$value}}
 609
 610   deny   domains       = +virtual_domains
 611          local_parts   = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
 612                                      {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
 613                                      {}}
 614          hosts         = !+debianhosts
 615          message       = mail for <$local_part@$domain> only accepted from debian.org machines
 616
 617   # Accept if the source is local SMTP (i.e. not over TCP/IP).
 618   # We do this by testing for an empty sending host field.
 619   accept  hosts = :
 620
 621   deny    domains       = +handled_domains
 622           local_parts   = ^[.] : ^.*[@%!/|]
 623
 624   deny    domains       = !+handled_domains
 625           local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
 626
 627   deny    condition     = ${lookup{$sender_address_local_part}lsearch{/etc/exim4/localusers}{true}}
 628           sender_domains= +local_domains
 629           hosts         = !+debianhosts
 630           message       = mail from <$sender_address> not allowed externally
 631
 632   deny    sender_domains= +virtual_domains
 633           condition     = ${if exists {${extract{directory}{VSENDERDOMAINDATA}{${value}/localusers}}}}
 634           condition     = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VSENDERDOMAINDATA}{${value}/localusers}}}{true}}
 635           hosts         = !+debianhosts
 636           message       = mail from <$sender_address> not allowed externally
 637
 638   deny    condition     = ${if match_domain{$sender_address_domain}{+virtual_domains}{1}{0}}
 639           condition     = ${if exists {${extract{directory}{VSENDERDOMAINDATA}{${value}/neversenders}}}{1}{0}}
 640           condition     = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VSENDERDOMAINDATA}{${value}/neversenders}}}{true}}
 641           message       = no mail should ever come from <$sender_address>
 642
 643   warn    condition     = ${if eq{$acl_m_prf}{localonly}}
 644           set acl_m_lrc = ${if eq{$acl_m_lrc}{}{$local_part@$domain}{$acl_m_lrc, $local_part@$domain}}
 645
 646 <%- if @is_packagesmaster -%>
 647   warn    condition      = ${if eq {$acl_m_prf}{PackagesMail}}
 648           condition      = ${if eq {$sender_address}{$local_part@$domain}}
 649           message        = X-Packages-FromTo-Same: yes
 650
 651 <%- end -%>
 652   deny    condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 653           !verify        = sender
 654
 655   defer   !hosts         = +debianhosts
 656           condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 657           condition      = ${if >{${eval:$acl_c_scr+0}}{0}}
 658           ratelimit      = 10 / 60m / per_rcpt / $sender_host_address
 659           message        = slow down (no reverse dns, mismatched ehlo, dialup, or in blacklists)
 660
 661 <%- if has_variable?("policydweight") && @policydweight -%>
 662   # Check with policyd-weight - this only works with a version after etch's,
 663   # sadly.  etch's version attempts to hold the socket open, since that's what
 664   # postfix expects.  Exim, on the other hand, expects the remote side to close
 665   # the socket when it's finished sending data, so it see each transaction as
 666   # an incomplete read.  I'm sure there's a way we could force exim to do
 667   # something sick and clever to force either the interpretation or the socket
 668   # closure, but I'm fairly sure it's now worth it, since the backport of
 669   # policyd-weight is trivial.
 670   warn  !hosts         = +debianhosts
 671         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 672         set acl_m_pw   = ${readsocket{inet:127.0.0.1:12525}\
 673                           {request=smtpd_access_policy\n\
 674                            protocol_state=RCPT\n\
 675                            protocol_name=${uc:$received_protocol}\n\
 676                            helo_name=$sender_helo_name\n\
 677                            queue_id=$message_exim_id\n\
 678                            sender=$sender_address\n\
 679                            recipient=$local_part@$domain\n\
 680                            recipient_count=$rcpt_count\n\
 681                            client_address=$sender_host_address\n\
 682                            client_name=$sender_host_name\n\
 683                            reverse_client_name=$sender_host_name\n\
 684                            instance=$sender_host_address.$sender_address.$sender_helo_name\n\n}\
 685                           {20s}{\n}{socket failure}}
 686
 687   # Defer on socket error
 688   defer !hosts         = +debianhosts
 689         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 690         condition      = ${if eq{$acl_m_pw}{socket failure}{yes}{no}}
 691         message        = Cannot connect to policyd-weight. Please try again later.
 692
 693   # Set proposed action to $acl_m_act and message to $acl_m_mes
 694   warn  !hosts         = +debianhosts
 695         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 696         set acl_m_mes  = ${extract{action}{$acl_m_pw}}
 697         set acl_m_act  = ${sg{$acl_m_pw}{\Naction=[^ ]+ (.*)\n\n\N}{\$1}}
 698
 699   # Add X-policyd-weight header line to message
 700   warn  !hosts         = +debianhosts
 701         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 702         message        = $acl_m_mes
 703         condition      = ${if eq{$acl_m_act}{PREPEND}{yes}{no}}
 704
 705   # Write log message, if policyd-weight can't run checks
 706   warn  !hosts         = +debianhosts
 707         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 708         log_message    = policyd-weight message: $acl_m_mes
 709         condition      = ${if eq{$acl_m_act}{DUNNO}{yes}{no}}
 710
 711   # Deny mails which policyd-weight thinks are spam
 712   deny  !hosts         = +debianhosts
 713         condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 714         message        = policyd-weight said: $acl_m_mes
 715         condition      = ${if eq{$acl_m_act}{550}{yes}{no}}
 716
 717   # Defer messages when policyd-weight suggests so.
 718   defer  !hosts         = +debianhosts
 719          condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 720          message        = policyd-weight said: $acl_m_mes
 721          condition      = ${if eq{$acl_m_act}{450}{yes}{no}}
 722
 723 <%- end -%>
 724 <%- if @is_rtmaster -%>
 725   warn    condition     = ${if eq{$acl_m_prf}{RTMail}}
 726           set acl_m12   = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}{match{$local_part}{3520}}{match{$local_part}{3645}}} {RTMailRecipientHasSubaddress}}}}
 727   # temporary hack because weasel screwed up and gave people an rt-3520@ address, which doesn't really work normally.  and rt-3645
 728   #set acl_m12  = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}} {RTMailRecipientHasSubaddress}}}}
 729
 730
 731 <%- end -%>
 732 <%- if has_variable?("greylistd") && @greylistd -%>
 733   defer
 734     message  = $sender_host_address is not yet authorized to deliver mail from <$sender_address> to <$local_part@$domain>.
 735     log_message = greylisted.
 736     local_parts    = ${if match_domain{$domain}{+virtual_domains}\
 737                      {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
 738                      {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
 739                      {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}} : \
 740                      ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}}}
 741     !senders       = :
 742     !hosts         = : +debianhosts : WHITELIST : \
 743                      ${if exists {/etc/greylistd/whitelist-hosts}\
 744                                  {/etc/greylistd/whitelist-hosts}{}} : \
 745                      ${if exists {/var/lib/greylistd/whitelist-hosts}\
 746                                  {/var/lib/greylistd/whitelist-hosts}{}}
 747     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 748     !authenticated = *
 749     domains        = +handled_domains
 750     condition      = ${readsocket{/var/run/greylistd/socket}\
 751                                  {--grey \
 752                                   $sender_host_address \
 753                                   $sender_address \
 754                                   $local_part@$domain}\
 755                                  {5s}{}{false}}
 756
 757 <%- elsif has_variable?("postgrey") && @postgrey -%>
 758   # next three are greylisting, inspired by http://www.bebt.de/blog/debian/archives/2006/07/30/T06_12_27/index.html
 759   # this adds acl_m_grey if there isn't one (so unique per message)
 760   warn
 761     !senders       = :
 762     !hosts         = : +debianhosts : WHITELIST
 763     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 764     condition      = ${if def:acl_m_grey {no}{yes}}
 765     set acl_m_grey = $pid.$tod_epoch.$sender_host_port
 766
 767   # and defers the message if postgrey thinks it should be defered ...
 768   defer
 769     !senders       = :
 770     !hosts         = : +debianhosts : WHITELIST
 771     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 772     !authenticated = *
 773     domains        = +handled_domains
 774     local_parts    = GREYLIST_LOCAL_PARTS
 775     set acl_m_pgr  = request=smtpd_access_policy\n\
 776                      protocol_state=RCPT\n\
 777                      protocol_name=${uc:$received_protocol}\n\
 778                      instance=${acl_m_grey}\n\
 779                      helo_name=${sender_helo_name}\n\
 780 <%- if scope.call_function('versioncmp', [@lsbmajdistrelease, '8']) <= 0 -%>
 781                      client_address=${substr_-3:${mask:$sender_host_address/24}}\n\
 782 <%- else -%>
 783                      client_address=${sender_host_address}\n\
 784 <%- end -%>
 785                      client_name=${sender_host_name}\n\
 786                      sender=${sender_address}\n\
 787                      recipient=$local_part@$domain\n\n
 788     set acl_m_pgr  = ${sg{\
 789                          ${readsocket{/var/run/postgrey/socket}{$acl_m_pgr}\
 790                                {5s}{}{action=DUNNO}}\
 791                      }{action=}{}}
 792     message        = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
 793     log_message    = greylisted.
 794     condition      = ${if eq{${uc:${substr{0}{5}{$acl_m_pgr}}}}{DEFER}}
 795
 796  # ... or adds a header with information about how long the delay was
 797  warn
 798     !senders       = :
 799     !hosts         = : +debianhosts : WHITELIST
 800     condition      = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 801     !authenticated = *
 802     domains        = +handled_domains
 803     local_parts    = GREYLIST_LOCAL_PARTS
 804     condition      = ${if eq{${uc:${substr_0_7:$acl_m_pgr}}}{PREPEND}}
 805     message        = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
 806
 807 <%- end -%>
 808   deny    hosts        = ${if exists{/etc/exim4/host_blacklist}{/etc/exim4/host_blacklist}{}}
 809           message      = I'm terribly sorry, but it seems you have been blacklisted
 810           log_message  = blacklisted IP
 811
 812   deny   log_message   = <$sender_address> is blacklisted
 813          senders       = ${if exists{/etc/exim4/blacklist}{/etc/exim4/blacklist}{}}
 814          message       = We have blacklisted <$sender_address>.  Please stop mailing us
 815
 816   accept  local_parts   = +postmasterish
 817           domains       = +virtual_domains : +bsmtp_domains
 818
 819 <%- unless @use_smarthost -%>
 820   deny    message  = host $sender_host_address is listed in $dnslist_domain; see $dnslist_text
 821           dnslists = ${if match_domain{$domain}{+virtual_domains}\
 822                      {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}\
 823                      {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}{$value}{}}}{}}}\
 824                      {${lookup{$local_part}lsearch{/etc/exim4/rbllist}{$value}{}}}} : \
 825                      ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rbl}{$value}{}}
 826           domains       = +handled_domains
 827           !hosts        = +debianhosts : WHITELIST
 828
 829 <%- end -%>
 830   deny    message  = domain $sender_address_domain is listed in $dnslist_domain; see $dnslist_text
 831           dnslists = ${if match_domain{$domain}{+virtual_domains}\
 832                      {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}\
 833                      {${expand:${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}{$value}{}}}}{}}}\
 834                      {${expand:${lookup{$local_part}lsearch{/etc/exim4/rhsbllist}{$value}{}}}}} : \
 835                      ${expand:${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rhsbl}{$value}{}}}
 836           domains       = +handled_domains
 837           !hosts        = +debianhosts : WHITELIST
 838
 839 <%- unless @use_smarthost -%>
 840   deny    domains  = +handled_domains
 841           local_parts = ${if match_domain{$domain}{+virtual_domains}\
 842                         {${if exists {${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}\
 843                         {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}{$local_part}{}}}{}}}\
 844                         {${lookup{$local_part}lsearch{/etc/exim4/callout_users}{$local_part}{}}}} : \
 845                         ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-callout}{$local_part}{}}
 846           !hosts   = +debianhosts : WHITELIST
 847           !verify  = sender/callout=90s,maxwait=300s
 848           message  = "Sender verification failed: $acl_verify_message"
 849
 850 <%- end -%>
 851 <%- if @is_mailrelay -%>
 852   accept  domains  = +mailhubdomains
 853           endpass
 854           verify   = recipient/callout=30s,defer_ok,use_sender,no_cache
 855
 856 <%- end -%>
 857   accept  domains  = +handled_domains
 858           endpass
 859           verify   = recipient/defer_ok
 860
 861   accept  hosts         = +debianhosts
 862
 863   accept  authenticated = *
 864
 865   deny    message = relay not permitted
 866
 867 <%- if @heavy -%>
 868 acl_check_mime:
 869
 870  accept  verify        = certificate
 871  accept  hosts         = +debianhosts
 872
 873  discard condition     = ${if <{$message_size}{256000}}
 874          condition     = ${if eq {$acl_m_prf}{blackhole}}
 875          set acl_m_srb = ${perl{surblspamcheck}}
 876          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 877          log_message   = discarded surbl message for $recipients
 878
 879   deny   condition     = ${if <{$message_size}{256000}}
 880          condition     = ${if eq {$acl_m_prf}{markup}{no}{yes}}
 881          condition     = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 882          set acl_m_srb = ${perl{surblspamcheck}}
 883          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 884          log_message   = $acl_m_srb
 885          message       = $acl_m_srb
 886
 887   warn   condition     = ${if <{$message_size}{256000}}
 888          condition     = ${if eq {$acl_m_prf}{markup}}
 889          set acl_m_srb = ${perl{surblspamcheck}}
 890          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 891          message       = X-Surbl-Hit: $primary_hostname: $acl_m_srb
 892
 893   accept
 894
 895 <%- end -%>
 896 acl_check_predata:
 897   deny   condition     = ${if eq{$acl_m_prf}{localonly}}
 898          message       = mail for $acl_m_lrc is only accepted internally
 899
 900   accept
 901
 902
 903 #!!# ACL that is used after the DATA command
 904 check_message:
 905
 906   # Some people put from hostmaster@something.debian.org in the From
 907   # header.  Take their crack pipe away.
 908   drop   condition = ${if match{${lc:$h_From:}}{\Npostmaster@([^.]+\.)?debian\.org\N}}
 909
 910 <%- if @is_rtmaster -%>
 911   deny    condition = ${if eq {$acl_m_prf}{RTMail}}
 912           condition = ${if and{{!match {${lc:$rh_Subject:}} {debian rt}} \
 913                                {!match {${lc:$rh_Subject:]}} {\N\[rt.debian.org \N}} \
 914                                {!match {$acl_m12}{RTMailRecipientHasSubaddress}}}}
 915           message  = messages to the Request Tracker system require a subject tag or a subaddress
 916
 917 <%- end -%>
 918 <%- if @is_packagesqamaster -%>
 919   deny    !hosts  = +debianhosts
 920           condition = ${if eq {$acl_m_prf}{PTSMail}}
 921           condition = ${if def:h_X-PTS-Approved:{false}{true}}
 922           message   = messages to the PTS require an X-PTS-Approved header
 923
 924 <%- end -%>
 925   deny    condition      = ${if eq {$acl_m_prf}{DBSignedMail}}
 926           condition      = ${if and {{!match {$message_body}{PGP MESSAGE}}              \
 927                                      {!match {$message_body}{PGP SIGNED MESSAGE}}       \
 928                                      {!match {$message_body}{PGP SIGNATURE}}            \
 929                                      {!match {$header_content-type:}{multipart/signed}} \
 930                                      {!match {$header_content-type:}{pgp}}              \
 931                                     }                                                   \
 932                             }
 933           message        = Mail to this address needs to be PGP-signed
 934
 935   accept  verify    = certificate
 936   accept  hosts     = +debianhosts
 937
 938   deny    condition = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 939           !verify   = header_syntax
 940           message   = Invalid header syntax: $acl_verify_message
 941
 942 # RFC 822 and 2822 say that headers must be ASCII.  This kinda emulates
 943 # postfix's strict_7bit_headers option, but only checks a few common problem
 944 # headers, as there doesn't appear to be an easy way to check them all.
 945   deny
 946           condition       = ${if or {{match {$rh_Subject:}{[\200-\377]}}\
 947                                  {match {$rh_To:}{[\200-\377]}}\
 948                                  {match {$rh_From:}{[\200-\377]}}\
 949                                  {match {$rh_Cc:}{[\200-\377]}}}{true}{false}}
 950           condition       = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 951           message         = improper use of 8-bit data in message header: message rejected
 952
 953   deny
 954           condition       = ${if match {$rh_Subject:}{[^[:print:]]\{8\}}{true}{false}}
 955           condition       = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 956           message         = Your mailer is not RFC 2047 compliant: message rejected
 957
 958 <%- if has_variable?("clamd") && @clamd -%>
 959   discard condition       = ${if eq {$acl_m_prf}{blackhole}}
 960   <%- if scope.call_function('versioncmp', [@lsbmajdistrelease, '8']) <= 0 -%>
 961           demime          = *
 962   <%- end -%>
 963           malware         = */defer_ok
 964           log_message     = discarded malware message for $recipients
 965
 966   deny    condition       = ${if eq {$acl_m_prf}{markup}{no}{yes}}
 967           condition       = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 968   <%- if scope.call_function('versioncmp', [@lsbmajdistrelease, '8']) <= 0 -%>
 969           demime          = *
 970   <%- end -%>
 971           malware         = */defer_ok
 972           message         = malware detected: $malware_name: message rejected
 973
 974   warn    condition       = ${if eq {$acl_m_prf}{markup}}
 975   <%- if scope.call_function('versioncmp', [@lsbmajdistrelease, '8']) <= 0 -%>
 976           demime          = *
 977   <%- end -%>
 978           malware         = */defer_ok
 979           message         = X-malware detected: $malware_name
 980
 981 <%- end -%>
 982 <%- if @heavy -%>
 983  discard condition     = ${if <{$message_size}{256000}}
 984          condition     = ${if eq {$acl_m_prf}{blackhole}}
 985          set acl_m_srb = ${perl{surblspamcheck}}
 986          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 987          log_message   = discarded surbl message for $recipients
 988
 989   deny   condition     = ${if <{$message_size}{256000}}
 990          condition     = ${if eq {$acl_m_prf}{markup}{no}{yes}}
 991          condition     = ${if eq {$acl_m_prf}{PopconMail}{no}{yes}}
 992          set acl_m_srb = ${perl{surblspamcheck}}
 993          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
 994          log_message   = $acl_m_srb
 995          message       = $acl_m_srb
 996
 997   warn   condition     = ${if <{$message_size}{256000}}
 998          condition     = ${if eq {$acl_m_prf}{markup}}
 999          set acl_m_srb = ${perl{surblspamcheck}}
1000          condition     = ${if eq{$acl_m_srb}{false}{no}{yes}}
1001          message       = X-Surbl-Hit: $primary_hostname: $acl_m_srb
1002
1003 <%- end -%>
1004   # Check header_sender except for survey@popcon.d.o
1005   deny    condition    = ${if eq{$acl_m_prf}{PopconMail}{false}{true}}
1006           !verify      = header_sender
1007           message      = No valid sender found in the From:, Sender: and Reply-to: headers
1008
1009 <%- if @is_packagesmaster -%>
1010   deny  message        = Congratulations, you scored $spam_score points.
1011         log_message    = spam: $spam_score points.
1012         condition      = ${if eq {$acl_m_prf}{PackagesMail}}
1013         !authenticated = *
1014         !verify        = certificate
1015         !hosts         = +debianhosts
1016         condition      = ${if <{$message_size}{256000}}
1017         spam           = pkg_user : true
1018         condition      = ${if >{$spam_score_int}{59}}
1019
1020 <%- end -%>
1021   accept
1022
1023
1024
1025 ######################################################################
1026 #                      REWRITE CONFIGURATION                         #
1027 ######################################################################
1028
1029
1030
1031 begin rewrite
1032
1033 \N^buildd_(.*)@fasolo\.debian\.org$\N buildd_$1@buildd.debian.org T
1034 *@debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1035 *@people.debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1036 #*@${primary_hostname} "${if exists{/etc/exim4/email-addresses}{${lookup{$1}lsearch{/etc/exim4/email-addresses}{$value}fail}}fail}" fFs
1037
1038
1039 #!!#######################################################!!#
1040 #!!# Here follow routers created from the old routers,   #!!#
1041 #!!# for handling non-local domains.                     #!!#
1042 #!!#######################################################!!#
1043
1044 begin routers
1045
1046
1047
1048 ######################################################################
1049 #                      ROUTERS CONFIGURATION                         #
1050 #                Specifies how addresses are handled                 #
1051 ######################################################################
1052 #                          ORDER DOES MATTER                         #
1053 #     An address is passed to each in turn until it is accepted.     #
1054 ######################################################################
1055
1056 <%- if @is_mailrelay -%>
1057 relay_manualroute:
1058   driver = manualroute
1059   domains = +mailhubdomains
1060   transport = remote_smtp
1061   route_data = ${lookup{$domain}lsearch{/etc/exim4/manualroute}}
1062   require_files = /etc/exim4/manualroute
1063
1064 <%- end -%>
1065 bsmtp:
1066   debug_print = "R: bsmtp for $local_part@$domain"
1067   driver = manualroute
1068   domains = +bsmtp_domains
1069   require_files = /etc/exim4/bsmtp
1070   route_list = * ${extract{file}{\
1071                    ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1072                      {$value}fail}}}
1073   transport = bsmtp
1074
1075 # This router routes to remote hosts over SMTP by explicit IP address,
1076 # given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
1077 # require this facility, which is why it is enabled by default in Exim.
1078 ipliteral:
1079   debug_print = "R: ipliteral for $local_part@$domain"
1080   driver = ipliteral
1081   domains = !+handled_domains
1082   transport = remote_smtp
1083   ignore_target_hosts = +reservedaddrs
1084
1085 <%- if @use_smarthost -%>
1086 smarthost:
1087   debug_print = "R: smarthost for $local_part@$domain"
1088   driver = manualroute
1089   domains = !+handled_domains
1090   transport = remote_smtp_smarthost
1091   route_list = * <%= @smarthost %>
1092   host_find_failed = defer
1093   same_domain_copy_routing = yes
1094   no_more
1095 <%- end -%>
1096
1097 # This router routes to remote hosts over SMTP using a DNS lookup.
1098 # Ignore reserved network responses, including localhost.
1099 dnslookup:
1100   debug_print = "R: dnslookup for $local_part@$domain"
1101   driver = dnslookup
1102   domains = !+handled_domains
1103   transport = remote_smtp
1104   ignore_target_hosts = +reservedaddrs
1105   no_more
1106
1107 postmasterish:
1108   debug_print = "R: postmasterish for $local_part@$domain"
1109   driver = redirect
1110   verify = false
1111   unseen = true
1112   expn = true
1113   local_parts = +postmasterish
1114   domains = +virtual_domains : +bsmtp_domains
1115   data = debian-admin@debian.org
1116   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1117
1118 # This router handles aliasing using a traditional /etc/aliases file.
1119 # If any of your aliases expand to pipes or files, you will need to set
1120 # up a user and a group for these deliveries to run under. You can do
1121 # this by uncommenting the "user" option below (changing the user name
1122 # as appropriate) and adding a "group" option if necessary.
1123
1124 system_aliases:
1125   debug_print = "R: system_aliases for $local_part@$domain"
1126   driver = redirect
1127   allow_defer
1128   allow_fail
1129   data = ${lookup{$local_part}lsearch*{/etc/aliases}}
1130   domains = +local_domains
1131   file_transport = address_file
1132   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1133   pipe_transport = address_pipe
1134   retry_use_local_part
1135
1136 # This router handles forwarding using traditional .forward files.
1137 # It also allows mail filtering when a forward file starts with the
1138 # string "# Exim filter": to disable filtering, uncomment the "filter"
1139 # option. The check_ancestor option means that if the forward file
1140 # generates an address that is an ancestor of the current one, the
1141 # current one gets passed on instead. This covers the case where A is
1142 # aliased to B and B has a .forward file pointing to A.
1143
1144 # For standard debian setup of one group per user, it is acceptable---normal
1145 # even---for .forward to be group writable. If you have everyone in one
1146 # group, you should comment out the "modemask" line. Without it, the exim
1147 # default of 022 will apply, which is probably what you want.
1148
1149 userforward_verify:
1150   debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1151   driver = redirect
1152   check_ancestor
1153   user = Debian-exim
1154   no_check_local_user
1155   directory_transport = address_directory
1156   domains = +local_domains
1157   # filter - I have disabled filtering to force users to use .forward-foo files
1158   # or procmail. This will make it easier to move mailers in the future
1159   #
1160   # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1161   # also checks if the .forward-bar exists, if not then it uses
1162   # .forward-default instead.
1163   file = $home/.forward\
1164          ${if eq{}{$local_part_suffix}{}{\
1165            ${if exists {${home}/.forward${local_part_suffix}} \
1166              {${local_part_suffix}}{-default}}\
1167            }\
1168           }
1169   file_transport = address_file
1170   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1171   local_part_suffix = -*
1172   local_part_suffix_optional
1173   modemask = 002
1174   pipe_transport = address_pipe
1175   reply_transport = address_reply
1176   require_files = $home
1177   router_home_directory = ${lookup passwd{$local_part}{${extract{5}{:}{$value}}}fail}
1178   verify_only
1179
1180 # This is a sendmailesque alias file lookup
1181 virt_aliases:
1182   debug_print = "R: virt_aliases for $local_part@$domain"
1183   driver = redirect
1184   allow_defer
1185   allow_fail
1186   data = ${if exists{\
1187            ${extract{directory}{VDOMAINDATA}{${value}/aliases}}}\
1188            {${lookup{$local_part}lsearch*{\
1189               ${extract{directory}{VDOMAINDATA}{$value/aliases}}\
1190            }}}}
1191   directory_transport = address_directory
1192   domains = +virtual_domains
1193   file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1194   cannot_route_message = Unknown user
1195   group = ${extract{group}{VDOMAINDATA}}
1196   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1197   pipe_transport = address_pipe
1198   qualify_preserve_domain
1199   retry_use_local_part
1200   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1201   transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1202   user = ${extract{user}{VDOMAINDATA}}
1203
1204 # No direct match, so try doing a regex match if there's an
1205 # aliases.regex
1206 virt_aliases_regex:
1207   debug_print = "R: virt_aliases_regex for $local_part$local_part_suffix@$domain"
1208   driver = redirect
1209   allow_defer
1210   allow_fail
1211   data = ${if exists{\
1212            ${extract{directory}{VDOMAINDATA}{${value}/aliases.regex}}}\
1213            {${lookup{$local_part}nwildlsearch*{\
1214               ${extract{directory}{VDOMAINDATA}{$value/aliases.regex}}\
1215            }}}}
1216   directory_transport = address_directory
1217   domains = +virtual_domains
1218   file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1219   cannot_route_message = Unknown user
1220   group = ${extract{group}{VDOMAINDATA}}
1221   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1222   pipe_transport = address_pipe
1223   qualify_preserve_domain
1224   retry_use_local_part
1225   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1226   transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1227   user = ${extract{user}{VDOMAINDATA}}
1228
1229 userforward:
1230   debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1231   driver = redirect
1232   check_ancestor
1233   check_local_user
1234   directory_transport = address_directory
1235   domains = +local_domains
1236   # filter - I have disabled filtering to force users to use .forward-foo files
1237   # or procmail. This will make it easier to move mailers in the future
1238   #
1239   # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1240   # also checks if the .forward-bar exists, if not then it uses
1241   # .forward-default instead.
1242   file = $home/.forward\
1243          ${if eq{}{$local_part_suffix}{}{\
1244            ${if exists {${home}/.forward${local_part_suffix}} \
1245              {${local_part_suffix}}{-default}}\
1246            }\
1247           }
1248   file_transport = address_file
1249   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1250   local_part_suffix = -*
1251   local_part_suffix_optional
1252   modemask = 002
1253   pipe_transport = address_pipe
1254   reply_transport = address_reply
1255   require_files = $home
1256   no_verify
1257
1258 # This delivers to procmail
1259 procmail:
1260   debug_print = "R: procmail for $local_part@$domain"
1261   driver = accept
1262   check_local_user
1263   domains = +local_domains
1264   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1265   local_part_suffix = -*
1266   local_part_suffix_optional
1267   no_verify
1268   no_expn
1269   require_files = $local_part:$home/.procmailrc
1270   transport = procmail_pipe
1271   transport_current_directory = $home
1272
1273 # This driver delivers to the LDAP generated alias file.
1274 ldap_aliases:
1275   debug_print = "R: ldap_aliases for $local_part@$domain"
1276   driver = redirect
1277   allow_defer
1278   allow_fail
1279   data = ${if exists{/var/lib/misc/$primary_hostname/user-forward.cdb}\
1280              {${lookup{$local_part}cdb\
1281                {/var/lib/misc/$primary_hostname/user-forward.cdb}}}}
1282   domains = +local_domains
1283   file_transport = address_file
1284   local_part_suffix = -*
1285   local_part_suffix_optional
1286   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1287   pipe_transport = address_pipe
1288   retry_use_local_part
1289
1290 # This director matches local user mailboxes.
1291 localuser:
1292   debug_print = "R: localuser for $local_part@$domain"
1293   driver = accept
1294   check_local_user
1295   domains = +local_domains
1296   local_part_suffix = -*
1297   local_part_suffix_optional
1298   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1299   # Disable if the user has never logged in
1300   require_files = $home
1301   transport = local_delivery
1302   no_more
1303
1304 # Now we begin the Virtual Domain configuration
1305 # Everything before here should apply only to the local domains with a
1306 # domains= rule
1307
1308 <%- if @is_packagesmaster -%>
1309 # This router delivers for packages.d.o
1310 packages:
1311   debug_print = "R: packages for $local_part@$domain"
1312   driver = redirect
1313   file_transport = address_file
1314   pipe_transport = address_pipe
1315   domains = packages.debian.org
1316   require_files = /srv/packages.debian.org/conf/maintainer
1317   data = ${lookup{$local_part}cdb{/srv/packages.debian.org/conf/maintainer.cdb}}
1318   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1319   transport_home_directory = /srv/packages.debian.org/mail
1320   transport_current_directory = /srv/packages.debian.org/mail
1321   check_ancestor
1322   retry_use_local_part
1323   no_more
1324
1325 <%- end -%>
1326 <%- if @is_rtmaster -%>
1327 # This router delivers for rt.d.o
1328 rt_force_new_verbose:
1329   debug_print = "R: rt for $local_part+new@$domain"
1330   driver = redirect
1331   domains = rt.debian.org
1332   require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1333   local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1334   local_part_suffix = +new
1335   pipe_transport = rt_pipe
1336   data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1337   headers_remove = Subject
1338   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?is)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1339
1340 # FIXME: figure out how to generalize this approach so that all of the following would work
1341 # - rt+NNNN@rt.debian.org          : attach correspondence to ticket (verbose)
1342 # - rt+NNNN-quiesce@rt.debian.org  : attach correspondence to ticket (quiesce)
1343 # - rt+NNNN-<action>@rt.debian.org : attach correspondence to ticket (some action)
1344 # requires modification to custom condition in 'scrips'
1345 rt_force_new_quiesce:
1346   debug_print = "R: rt for $local_part+new-quiesce@$domain"
1347   driver = redirect
1348   domains = rt.debian.org
1349   require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1350   local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1351   local_part_suffix = +new-quiesce
1352   pipe_transport = rt_pipe
1353   data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1354   headers_remove = Subject
1355   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nX-RT-Mode: quiesce\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?is)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1356
1357 rt_otherwise:
1358   debug_print = "R: rt for $local_part@$domain"
1359   driver = redirect
1360   domains = rt.debian.org
1361   require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1362   local_parts = ${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1363   local_part_suffix = +*
1364   local_part_suffix_optional
1365   pipe_transport = rt_pipe
1366   data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --extension ticket --action ${if match{$local_part}{.*-comment.*}{comment}{${if match{$local_part}{.*-done.*}{correspond-resolve}{correspond}}}}"
1367   headers_remove = Subject
1368   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1369 <%- end -%>
1370
1371 # exim4 fails the router if it can't change to the user/group for delivery
1372 # during verification.  So we have to seperate the cases of verifying
1373 # the virts, and delivering to them.  blah.
1374
1375 virt_direct_verify:
1376   debug_print = "R: virt_direct for $local_part@$domain"
1377   driver = redirect
1378   no_check_local_user
1379   user = Debian-exim
1380   allow_filter
1381   modemask = 002
1382   directory_transport = address_directory
1383   domains = +virtual_domains
1384   local_part_suffix = -*
1385   local_part_suffix_optional
1386   file = $home/.forward-\
1387               ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1388                    {default}}
1389   file_transport = address_file
1390   pipe_transport = address_pipe
1391   reply_transport = address_reply
1392   retry_use_local_part
1393   router_home_directory = ${extract{directory}{VDOMAINDATA}}
1394   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1395   verify_only
1396
1397 # This is a qmailesque deliver into a directory of .forward files
1398 virt_direct:
1399   debug_print = "R: virt_direct for $local_part@$domain"
1400   driver = redirect
1401   allow_filter
1402   allow_fail
1403   allow_defer
1404   no_check_local_user
1405   directory_transport = address_directory
1406   domains = +virtual_domains
1407   file = $home/.forward-\
1408               ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1409                    {default}}
1410   file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1411   group = ${extract{group}{VDOMAINDATA}}
1412   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1413   modemask = 002
1414   local_part_suffix = -*
1415   local_part_suffix_optional
1416   pipe_transport = address_pipe
1417   reply_transport = address_reply
1418   retry_use_local_part
1419   router_home_directory = ${extract{directory}{VDOMAINDATA}}
1420   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1421   no_verify
1422   user = ${extract{user}{VDOMAINDATA}}
1423   #debug_print = .forward-${if exists {${home}/.forward-${local_part}} {${local_part}} {default}}
1424
1425 # This router delivers to the LDAP generated mail-forward file.
1426 # It's only really useful for debian.org
1427 virt_users:
1428   debug_print = "R: virt_users for $local_part@$domain"
1429   driver = redirect
1430   allow_defer
1431   allow_fail
1432   router_home_directory = ${extract{directory}{VDOMAINDATA}}
1433   transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1434   user = ${extract{user}{VDOMAINDATA}}
1435   group = ${extract{group}{VDOMAINDATA}}
1436   # Manually construct the forwarding address, preserving the
1437   # local_part_suffix if the remote host is master.
1438   data = ${if and {{exists{${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}\
1439                      {! eq {${lookup{$local_part}cdb\
1440                             {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}\
1441                            {}}}\
1442              {${local_part:${lookup{$local_part}cdb\
1443              {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}\
1444              ${if eq {${domain:${lookup{$local_part}cdb\
1445              {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}{master.debian.org}{$local_part_suffix} {}}\
1446              @\
1447              ${domain:${lookup{$local_part}cdb\
1448             {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}}
1449   domains = +virtual_domains
1450   file_transport = address_file
1451   headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1452   pipe_transport = address_pipe
1453   local_part_suffix = -*
1454   local_part_suffix_optional
1455   retry_use_local_part
1456
1457 <%=
1458 out = ""
1459 if @is_bugsmx
1460   domain = 'bugs.debian.org'
1461   out = '
1462 # This router delivers for bugs.d.o
1463 bugs:
1464   debug_print = "R: bugs for $local_part@$domain"
1465   driver = accept
1466   transport = bugs_pipe
1467   domains = ' + domain + '
1468   cannot_route_message = Unknown or archived bug
1469   require_files = /srv/bugs.debian.org/mail/run-procmail
1470   no_more
1471   local_parts = ${if match\
1472                   {$local_part}\
1473                   {\N^(\d+)(\d{2})(?:-(?:(?:submit|maintonly|quiet|forwarded|done|close|request|submitter)|(?:unsubscribe|ignore|help|(?:sub(?:scribe|help|yes|approve|reject))|unsubyes|bounce|probe|approve|reject|setlistyes|setlistsilentyes).*))?$\N}\
1474                {${if exists{/srv/bugs.debian.org/spool/db-h/$2/$1$2.summary}\
1475                {$local_part}fail}}fail}
1476 '
1477 end
1478 out
1479 %>
1480 ######################################################################
1481 #                      TRANSPORTS CONFIGURATION                      #
1482 ######################################################################
1483 #                       ORDER DOES NOT MATTER                        #
1484 #     Only one appropriate transport is called for each delivery.    #
1485 ######################################################################
1486
1487
1488 begin transports
1489
1490 # This transport is used for local delivery to user mailboxes. On debian
1491 # systems group mail is used so we can write to the /var/mail
1492 # directory. (The alternative, which most other unixes use, is to deliver
1493 # as the user's own group, into a sticky-bitted directory)
1494 local_delivery:
1495   driver = appendfile
1496   file = /var/mail/${local_part}
1497   group = mail
1498   mode = 0660
1499   no_mode_fail_narrower
1500   return_path_add
1501
1502 # This transport is used for handling pipe addresses generated by alias
1503 # or .forward files. It has a conventional name, since it is not actually
1504 # mentioned elsewhere in this configuration file. (A different name *can*
1505 # be specified via the "address_pipe_transport" option if you really want
1506 # to.) If the pipe generates any standard output, it is returned to the sender
1507 # of the message as a delivery error. Set return_fail_output instead if you
1508 # want this to happen only when the pipe fails to complete normally.
1509
1510 address_pipe:
1511   driver = pipe
1512   current_directory = ${home}
1513   environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1514                  EXT=${substr_1:${local_part_suffix}}:\
1515                  LOCAL=${local_part}${local_part_suffix}:\
1516                  RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1517   return_output
1518   return_path_add
1519
1520 # This transport is used for handling file addresses generated by alias
1521 # or .forward files. It has a conventional name, since it is not actually
1522 # mentioned elsewhere in this configuration file.
1523
1524 address_file:
1525   driver = appendfile
1526   return_path_add
1527
1528 address_file_group:
1529   driver = appendfile
1530   return_path_add
1531   mode = 0660
1532   directory_mode = 0770
1533   mode_fail_narrower = false
1534
1535 # This transport is used for handling file addresses generated by alias
1536 # or .forward files if the path ends in "/", which causes it to be treated
1537 # as a directory name rather than a file name. Each message is then delivered
1538 # to a unique file in the directory. If instead you want all such deliveries to
1539 # be in the "maildir" format that is used by some other mail software,
1540 # uncomment the final option below. If this is done, the directory specified
1541 # in the .forward or alias file is the base maildir directory.
1542 #
1543 # Should you want to be able to specify either maildir or non-maildir
1544 # directory-style deliveries, then you must set up yet another transport,
1545 # called address_directory2. This is used if the path ends in "//" so should
1546 # be the one used for maildir, as the double slash suggests another level
1547 # of directory. In the absence of address_directory2, paths ending in //
1548 # are passed to address_directory.
1549
1550 address_directory:
1551   driver = appendfile
1552   check_string =
1553   maildir_format
1554   message_prefix = ""
1555   message_suffix = ""
1556   return_path_add
1557
1558 # This transport is used for handling autoreplies generated by the filtering
1559 # option of the forwardfile director. It has a conventional name, since it
1560 # is not actually mentioned elsewhere in this configuration file.
1561 address_reply:
1562   driver = autoreply
1563
1564 # This transport is used for delivering messages over SMTP connections.
1565
1566 remote_smtp:
1567   driver = smtp
1568   connect_timeout = 15s
1569   delay_after_cutoff = false
1570   tls_certificate = /etc/exim4/ssl/thishost.crt
1571   tls_privatekey = /etc/exim4/ssl/thishost.key
1572
1573 <%- if @use_smarthost -%>
1574 remote_smtp_smarthost:
1575   debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
1576   driver = smtp
1577   delay_after_cutoff = false
1578   port = <%= @smarthost_port %>
1579   tls_tempfail_tryclear = false
1580   hosts_require_tls = <%= @smarthost %>
1581   tls_certificate = /etc/exim4/ssl/thishost.crt
1582   tls_privatekey = /etc/exim4/ssl/thishost.key
1583 <%- end -%>
1584 # Send the message to procmail
1585 procmail_pipe:
1586   driver = pipe
1587   command = /usr/bin/procmail -a ${substr_1:${local_part_suffix}}
1588   return_path_add
1589   user = ${local_part}
1590
1591 bsmtp:
1592   driver = appendfile
1593   batch_max = 100
1594   file = ${host}
1595   message_prefix =
1596   message_suffix =
1597   use_bsmtp
1598   user = ${extract{user}{\
1599                    ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1600                      {$value}fail}\
1601                    }}
1602
1603 <%- if @is_bugsmx -%>
1604 bugs_pipe:
1605   driver = pipe
1606   command = /srv/bugs.debian.org/mail/run-procmail
1607   environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1608                  EXT=${substr_1:${local_part_suffix}}:\
1609                  LOCAL=${local_part}${local_part_suffix}:\
1610                  RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1611   return_path_add
1612   return_output
1613   user = debbugs
1614
1615 <%- end -%>
1616 <%- if @is_rtmaster -%>
1617 rt_pipe:
1618   debug_print = "T: rt_pipe for $local_part${local_part_suffix}@$domain"
1619   driver = pipe
1620   return_fail_output
1621   environment = EXTENSION=${substr_1:${local_part_suffix}}
1622   allow_commands = /usr/bin/rt-mailgate
1623
1624 <%- end -%>
1625
1626 ######################################################################
1627 #                      RETRY CONFIGURATION                           #
1628 ######################################################################
1629
1630 # This single retry rule applies to all domains and all errors. It specifies
1631 # retries every 15 minutes for 2 hours, then increasing retry intervals,
1632 # starting at 2 hours and increasing each time by a factor of 1.5, up to 16
1633 # hours, then retries every 8 hours until 4 days have passed since the first
1634 # failed delivery.
1635
1636 # Domain               Error       Retries
1637 # ------               -----       -------
1638
1639
1640 begin retry
1641
1642 debian.org             *           F,2h,10m; G,16h,2h,1.5; F,14d,8h
1643 *                      * senders=: F,2h,10m
1644 *                      rcpt_4xx    F,2h,5m;  F,4h,10m; F,4d,15m
1645 *                      *           F,2h,15m; G,16h,2h,1.5; F,4d,8h
1646
1647 # End of Exim 4 configuration