2 ## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
3 ## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
6 # This is the main exim4 configuration file based on the 28.08.05 version by
9 # The configuration file uses a set of rules to generate an
10 # acceptable mail environment for debian.org machines. It deviates
11 # considerably from what could be considered a standard Exim configuration.
13 # This configuration file brings in the necessary information from
14 # other databases stored in /etc/exim4/ and the files distributed by ud-ldap
16 # This file is independent of the local host, it should not be changed
17 # per machine. primary_hostname is used in all places that require per-host
20 # The configuration files in /etc/exim4 are as follows:
21 # locals - This is a list of domains that are considered local. A local
22 # domain is essentially one for which deliveries to /var/mail
23 # will be attempted. The users available for local delivery
24 # come from /etc/passwd and /etc/aliases. Wildcards are not
26 # virtualdomains - This is a list of all virtual domains. A virtual domain
27 # is much like a local domain, execpt that the delivery location
28 # and allowed set of users is controlled by a virtual domain
29 # alias file and not /etc/passwd. Wildcards are permitted
30 # relayhosts - Hostnames that can send any arbitarily addressed mail to
31 # us. This is primarily only useful for emergency 'queue
32 # flushing' operations, but should be populated with a list
33 # of trusted machines. Wildcards are not permitted
34 # bsmtp_domains - Domains that we deliver locally via bsmtp
35 # submission-domains - Domains for which mail will be accepted via the
37 <%- if @is_mailrelay -%>
38 # mailhubdomains - Domains for which we are the MX, but the mail is relayed
39 # elsewhere. This is designed for use with small volume or
40 # restricted machines that need to use a smarthost for mail
41 # traffic. We will relay for them based on ssl cert validation
42 # but we need to teach Exim how to route the mail to them. This is
46 # From /var/lib/misc / UD:
48 # mail-forward.cdb - aliases for @d.o
49 # user-forward.cdb - aliases for @thishost.d.o
51 # Exim's wildcard mechanism is a bit odd in that to say "any address in
52 # debian.org including debian.org" you must use two patterns,
55 # Also you can only place a * before a . and as the first char in a string.
56 # Wildcards always match last so they may be used as a catchall.
58 # Further details can be found in each of the files.
60 # Useful Exim commands:
61 # exim4 -qf - Try sending all messages right now, including frozen ones
62 # exim4 -bt foo@blah - Write what Exim would do if it saw the address
63 # Great for testing virtual domains and forward files
65 # Special Features for users:
66 # .forward-foo - is understood as an extension address for bar-foo@cow.com
67 # .forward-default - is understood to be a catch all for bar-*@cow.com
68 # .procmailrc - with no .forward file invokes procmail for delivery
71 # For virtual domains the first lookup is done against a linear text
72 # database called 'aliases', then .forward files are consulted. Exim
73 # filtering is available for these .forward files only. .forward-default
74 # is the universal catch all for everything not handled.
76 # Heuristic check (none bad enough to cause a hard reject, but in aggregate
77 # will trigger things like rcpt to rate limiting or possibly a reject if
78 # enough hits are triggered).
80 # value is stored in acl_c_scr
82 ######################################################################
83 # MAIN CONFIGURATION SETTINGS #
84 ######################################################################
87 perl_startup = do '/etc/exim4/exim_surbl.pl'
90 # These options specify the Access Control Lists (ACLs) that
91 # are used for incoming SMTP messages - after the RCPT and DATA
92 # commands, respectively.
94 acl_smtp_helo = check_helo
95 acl_smtp_rcpt = ${if ={$interface_port}{587} {check_submission}{check_recipient}}
96 acl_smtp_data = check_message
98 acl_smtp_mime = acl_check_mime
100 acl_smtp_predata = acl_check_predata
102 # accept domain literal syntax in e-mail addresses. To actually make use of
103 # this a router is also required
104 allow_domain_literals = true
106 # This setting defines a named domain list called
107 # local_domains. It will be referenced
108 # later on by the syntax "+local_domains".
109 # Other domain and host lists may follow.
110 # @ is the local FQDN, @[] matches the IP adress of any local interface.
112 domainlist local_domains = @ : \
115 ${if exists {/etc/exim4/locals}{lsearch;/etc/exim4/locals}}
117 domainlist virtual_domains = partial-lsearch;/etc/exim4/virtualdomains
119 domainlist submission_domains = ${if exists {/etc/exim4/submission-domains}{/etc/exim4/submission-domains}{}}
121 domainlist bsmtp_domains = ${if exists {/etc/exim4/bsmtp}{partial-lsearch;/etc/exim4/bsmtp}{}}
123 domainlist handled_domains = +local_domains : +virtual_domains : +bsmtp_domains
125 domainlist ourself_and_handled = $primary_hostname : +handled_domains
127 localpartlist local_only_users = lsearch;/etc/exim4/localusers
129 localpartlist postmasterish = postmaster : abuse : hostmaster
131 hostlist debianhosts = <; ; 127.0.0.1 ; ::1 ; /var/lib/misc/thishost/debianhosts
133 hostlist reservedaddrs = 0.0.0.0/8 : 127.0.0.0/8 : 10.0.0.0/8 : 169.254.0.0/16 : 172.16.0.0/12 : 192.0.0.0/24 : 192.168.0.0/16 : 224.0.0.0/4 : 240.0.0.0/5 : 248.0.0.0/5
135 domainlist google_mxen = aspmx.l.google.com : gmail-smtp-in.l.google.com : \
136 *.aspmx.l.google.com : *.gmail-smtp-in.l.google.com
138 domainlist single_domain_mx = +google_mxen
140 <%- if @is_mailrelay -%>
141 # Domains we relay for; that is domains that aren't considered local but we
142 # accept mail for them.
143 domainlist mailhubdomains = lsearch;/etc/exim4/manualroute
146 tls_certificate = /etc/exim4/ssl/thishost.crt
147 tls_privatekey = /etc/exim4/ssl/thishost.key
148 tls_try_verify_hosts = *
149 tls_verify_certificates = /etc/exim4/ssl/ca.crt
150 tls_crl = /etc/exim4/ssl/ca.crl
152 # The setting below causes Exim to do a reverse DNS lookup on all incoming
153 # IP calls, in order to get the true host name. If you feel this is too
154 # expensive, you can specify the networks for which a lookup is done, or
155 # remove the setting entirely.
157 dns_ipv4_lookup = +google_mxen
159 # If this option is set, then any process that is running as one of the
160 # listed users may pass a message to Exim and specify the sender's
161 # address using the "-f" command line option, without Exim's adding a
164 untrusted_set_sender = *
166 # Some spam scanners (*cough* irritated *cough*) want the Sender field
167 # to exist. Appease them by not actually adding a Sender field.
169 local_from_check = false
171 # Some operating systems use the "gecos" field in the system password file
172 # to hold other information in addition to users' real names. Exim looks up
173 # this field when it is creating "sender" and "from" headers. If these options
174 # are set, Exim uses "gecos_pattern" to parse the gecos field, and then
175 # expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
178 gecos_pattern = ^([^,:]*)
181 # Do *not* include the body of the original message in a bounce
182 # The combination of bounce_return_message and bounce_return_body
183 # allows us to return only the headers within a bounce
185 bounce_return_message = true
186 bounce_return_body = false
188 # This tells Exim to immediately discard error messages (ie double bounces).
189 ignore_bounce_errors_after = 0s
191 timeout_frozen_after=14d
193 message_size_limit = 100M
195 smtp_accept_max_per_host = ${if match_ip {$sender_host_address}{+debianhosts}{0}{7}}
197 smtp_accept_max = 300
198 smtp_accept_queue = 200
199 smtp_accept_queue_per_connection = 50
200 smtp_accept_reserve = 25
203 smtp_accept_queue = 20
204 smtp_accept_queue_per_connection = 10
205 smtp_accept_reserve = 5
207 smtp_reserve_hosts = +debianhosts
209 split_spool_directory = true
210 check_spool_inodes = 200
211 check_spool_space = 20M
216 message_body_visible = 5000
218 deliver_queue_load_max = 50
220 smtp_load_reserve = 20
223 <%- if scope.lookupvar('::processorcount').to_s != 'undefined' -%>
224 deliver_queue_load_max = <%= [scope.lookupvar('::processorcount').to_i,2].max * 5 %>
225 queue_only_load = <%= [scope.lookupvar('::processorcount').to_i,2].max * 4 %>
227 deliver_queue_load_max = 10
231 queue_list_requires_admin = false
233 <%- if has_variable?("clamd") && @clamd -%>
234 av_scanner = clamd:/var/run/clamav/clamd.ctl
239 out = "daemon_smtp_ports = "
241 if @mail_port # if we have an overridden mail_port
250 ports << @smarthost_port
253 out += ports.uniq.sort.join(" : ")
258 remote_sort_domains = *.debian.org:*.debian.net
260 pipelining_advertise_hosts = !*
261 tls_advertise_hosts = *
262 smtp_enforce_sync = true
268 +queue_time_overall \
270 +received_recipients \
271 +sender_on_delivery \
272 +return_path_on_delivery \
276 +smtp_incomplete_transaction \
282 received_header_text = Received: ${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
283 {${if def:sender_ident {from ${quote_local_part:$sender_ident} }}${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
284 ${if and {{eq {$tls_certificate_verified}{1}}{def:tls_peerdn}}{from $tls_peerdn (verified)\n\t}}\
285 by $primary_hostname ${if def:received_protocol {with $received_protocol}} ${if def:tls_cipher {($tls_cipher)\n\t}}\
286 (Exim $version_number)\n\t\
287 ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}\
288 id $message_exim_id${if def:received_for {\n\tfor $received_for}}
292 MAX_SCAN_SIZE = 256000
293 VDOMAINDATA = ${lookup{$domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
294 VSENDERDOMAINDATA = ${lookup{$sender_address_domain}partial-lsearch{/etc/exim4/virtualdomains}{$value}}
295 WHITELIST = ${if match_domain{$domain}{+virtual_domains}\
296 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}\
297 {${lookup{$local_part}lsearch{${extract{directory}{VDOMAINDATA}{${value}/whitelist}}}{$value}{}}}{}}}\
298 {/etc/exim4/whitelist} } : \
299 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-whitelist}{$value}{}}
300 GREYLIST_LOCAL_PARTS = ${if match_domain{$domain}{+virtual_domains}\
301 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
302 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
303 {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}}}} : \
304 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}
305 <%- if @is_rtmaster -%>
306 RT_QUEUE_MAP = /srv/rt.debian.org/mail/rt_queue_map
312 ######################################################################
313 # ACL CONFIGURATION #
314 ######################################################################
318 # There are a few profiles that don't want much smtp time checking of
319 # mail. It's easier to track them in one place
321 accept condition = ${if eq {$acl_m_prf}{PopconMail}}
322 accept condition = ${if eq {$acl_m_prf}{BugsMail}}
327 # Determine the mail profile for this recipient.
328 # An empty string implies no match has been found.
330 warn set acl_m_rprf =
332 warn recipients = survey@popcon.debian.org
333 set acl_m_rprf = PopconMail
335 accept condition = ${if !eq {$acl_m_rprf}{}}
337 warn local_parts = +local_only_users
338 domains = +local_domains
339 hosts = !+debianhosts
340 set acl_m_rprf = localonly
342 <%- if @is_mailrelay -%>
343 warn local_parts = +local_only_users
344 domains = +mailhubdomains
345 hosts = !+debianhosts
346 set acl_m_rprf = localonly
349 accept condition = ${if !eq {$acl_m_rprf}{}}
351 <%- if @is_rtmaster -%>
352 warn domains = rt.debian.org
353 set acl_m_rprf = RTMail
355 accept condition = ${if !eq {$acl_m_rprf}{}}
358 <%- if @is_bugsmx -%>
359 warn domains = bugs.debian.org
360 set acl_m_rprf = BugsMail
362 accept condition = ${if !eq {$acl_m_rprf}{}}
365 <%- if @is_packagesmaster -%>
366 warn domains = packages.debian.org
367 set acl_m_rprf = PackagesMail
369 accept condition = ${if !eq {$acl_m_rprf}{}}
372 <%- if @is_packagesqamaster -%>
373 warn recipients = owner@packages.qa.debian.org : postmaster@packages.qa.debian.org
374 set acl_m_rprf = PTSOwner
376 accept condition = ${if !eq {$acl_m_rprf}{}}
379 domains = packages.qa.debian.org
380 condition = ${if match{$local_part}{\N^bounces+\N}}
381 set acl_m_rprf = PTSListBounce
383 accept condition = ${if !eq {$acl_m_rprf}{}}
385 warn domains = packages.qa.debian.org
386 set acl_m_rprf = PTSMail
388 accept condition = ${if !eq {$acl_m_rprf}{}}
391 warn recipients = change@db.debian.org : changes@db.debian.org : chpasswd@db.debian.org : ping@db.debian.org : recommend@nm.debian.org
392 set acl_m_rprf = DBSignedMail
394 accept condition = ${if !eq {$acl_m_rprf}{}}
396 warn domains = +virtual_domains
397 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
398 condition = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{markup}}
399 set acl_m_rprf = markup
401 accept condition = ${if !eq {$acl_m_rprf}{}}
403 warn domains = +virtual_domains
404 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}}
405 condition = ${if eq{${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction}}}{$value}{}}}{blackhole}}
406 set acl_m_rprf = blackhole
408 accept condition = ${if !eq {$acl_m_rprf}{}}
410 warn domains = +virtual_domains
411 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
412 condition = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{markup}}
413 set acl_m_rprf = markup
415 accept condition = ${if !eq {$acl_m_rprf}{}}
417 warn domains = +virtual_domains
418 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}}
419 condition = ${if eq{${lookup{$local_part}cdb{${extract{directory}{VDOMAINDATA}{${value}/contentinspectionaction.cdb}}}{$value}{}}}{blackhole}}
420 set acl_m_rprf = blackhole
422 accept condition = ${if !eq {$acl_m_rprf}{}}
424 warn domains = +local_domains
425 condition = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{markup}}
426 set acl_m_rprf = markup
428 accept condition = ${if !eq {$acl_m_rprf}{}}
430 warn domains = +local_domains
431 condition = ${if eq{${lookup{$local_part}cdb{/var/lib/misc/${primary_hostname}/mail-contentinspectionaction.cdb}{$value}{}}}{blackhole}}
432 set acl_m_rprf = blackhole
434 accept condition = ${if !eq {$acl_m_rprf}{}}
436 warn set acl_m_rprf = normal
442 warn set acl_c_scr = 0
444 <%- if @is_mailrelay -%>
445 accept verify = certificate
448 <%- unless @use_smarthost -%>
449 # These are in HELO acl so that they are only run once. They increment a counter,
450 # so we don't want it to increment per rcpt to.
452 warn dnslists = list.dnswl.org&0.0.0.3
453 log_message = Hit on list.dnswl.org for $sender_host_address
454 set acl_c_scr = ${eval:$acl_c_scr-30}
456 warn dnslists = list.dnswl.org&0.0.0.2
457 log_message = Hit on list.dnswl.org for $sender_host_address
458 set acl_c_scr = ${eval:$acl_c_scr-20}
460 warn dnslists = list.dnswl.org
461 log_message = Hit on list.dnswl.org for $sender_host_address
462 set acl_c_scr = ${eval:$acl_c_scr-10}
464 warn condition = ${if isip {$sender_helo_name}}
465 log_message = remote host used IP address in HELO/EHLO greeting
466 set acl_c_scr = ${eval:$acl_c_scr+20}
468 warn !hosts = +debianhosts
469 condition = ${if eq{$host_lookup_failed}{1}}
470 set acl_c_scr = ${eval:$acl_c_scr+20}
472 warn !hosts = +debianhosts
473 condition = ${if eq{$host_lookup_failed}{0}}
474 condition = ${if match{$sender_host_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
475 set acl_c_scr = ${eval:$acl_c_scr+20}
477 warn !hosts = +debianhosts
478 condition = ${if match{$sender_helo_name}{\N(^[^\.]*[0-9]\-+[0-9]|^[^\.]*[0-9]{5,}[^\.]|^([^\.]+\.)?[0-9][^ \.]*\.[^\.]+\..+\.[a-z]|^[^\.]*[0-9]\.[^\.]*[0-9]-[0-9]|^(dyn|cable|dhcp|dialup|ppp|adsl)[^\.]*[0-9])\N}}
479 set acl_c_scr = ${eval:$acl_c_scr+20}
481 warn !hosts = +debianhosts
482 dnslists = dul.dnsbl.sorbs.net
483 set acl_c_scr = ${eval:$acl_c_scr+15}
485 # If the sender's helo name is empty, the message will be rejected later
486 # because the helo is empty. If the rDNS lookup failed, we are already
487 # going to greylist them, so no sense worrying about it here. Finally,
488 # if rDNS does not match helo name (both lower cased first), greylist.
490 warn !hosts = +debianhosts
491 condition = ${if !eq {$host_lookup_failed}{1}}
492 condition = ${if def:sender_helo_name}
493 condition = ${if !eq {${lc:$sender_helo_name}}{${lc:$sender_host_name}}}
494 log_message = HELO doesn't match rDNS
495 set acl_c_scr = ${eval:$acl_c_scr+8}
498 # matches 098325879 - looks fishy
500 warn condition = ${if and { \
501 { !match{$sender_helo_name}{\N^\[.+\]$\N} } \
502 { !match{$sender_helo_name}{\N^(?i)((?=[^-])[a-z0-9-]*[a-z0-9]\.)+[a-z]{2,6}$\N} } \
505 log_message = non-FQDN HELO
506 set acl_c_scr = ${eval:$acl_c_scr+12}
508 # Matches DOMAIN99.com - looks bad
510 warn condition = ${if match {$sender_helo_name}{\N^[A-Z]+[A-Z0-9\-]+\.[A-Za-z0-9]+$\N}}
511 log_message = SHOUTING HELO
512 set acl_c_scr = ${eval:$acl_c_scr+7}
514 # Random HELO (run of 7 consonants) (constructed by viruses). We purposefully
515 # skip matching on machines named .*smtp.*, since that's 4 already. This is a fairly
516 # naive test, so it's not worth much
518 warn condition = ${if !match {${lc:$sender_helo_name}}{smtp}}
519 condition = ${if match {${lc:$sender_helo_name}}{\N^[a-z0-9]+\.[a-z]+$\N}}
520 condition = ${if match {${lc:$sender_helo_name}}{\N.*[bcdfghjklmnpqrstvwxz]{7,}.*\.[a-z]+$\N}}
521 log_message = random HELO
522 set acl_c_scr = ${eval:$acl_c_scr+5}
525 drop !hosts = +debianhosts
526 log_message = mail from non-d.o host
527 message = Interesting. I doubt that should have happened.
530 # Implicit, but simpler to just say it
533 #!!# ACL that is used after the RCPT command on the submission port
536 accept hosts = +debianhosts
538 <%- if @is_mailrelay -%>
539 accept verify = certificate
542 # Defer after too many bad RCPT TO's. Legit MTAs will retry later.
543 # This is a rough pass at preventing address harvesting or other mail blasts.
545 defer log_message = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
546 message = Too many bad recipients, try again later
547 condition = ${if > {${eval:$rcpt_fail_count}}{3}}
550 ratelimit = 5 / 60m / per_rcpt / $sender_host_address
551 !hosts = +debianhosts
552 message = sorry, only 5 reports per hour for submission
554 accept domains = +local_domains
559 <%- if @is_mailrelay -%>
560 accept domains = +mailhubdomains
562 verify = recipient/callout=30s,defer_ok,use_sender,no_cache
565 accept domains = +submission_domains
569 deny message = relay not permitted
571 #!!# ACL that is used after the RCPT command
574 <%- if @is_mailrelay -%>
575 accept verify = certificate
578 accept hosts = <; ::1 ; 127.0.0.1 ; @
579 warn acl = acl_getprofile
580 condition = ${if eq{$acl_m_prf}{}}
581 set acl_m_prf = $acl_m_rprf
583 defer condition = ${if !eq{$acl_m_prf}{$acl_m_rprf}}
584 message = Different profile, please retry
585 log_message = Only one profile at a time, please
587 # Defer after too many bad RCPT TO's. Legit MTAs will retry later.
588 # This is a rough pass at preventing address harvesting or other mail blasts.
590 defer log_message = Too many bad recipients ${eval:$rcpt_fail_count} out of $rcpt_count
591 !acl = acl_spamlovers
592 message = Too many bad recipients, try again later
593 !hosts = +debianhosts
594 condition = ${if > {${eval:$rcpt_fail_count}}{3}}
596 # Dump spambots that are so stupid they say helo as our IP address
598 drop !hosts = +debianhosts
599 !acl = acl_spamlovers
600 condition = ${if eq {$sender_helo_name}{$interface_address}}
601 message = HELO mismatch Forged HELO for ($sender_helo_name)
603 # Also for spambots that say helo as us or one of our domains
605 drop !hosts = +debianhosts
606 !acl = acl_spamlovers
607 condition = ${if match_domain{$sender_helo_name}{+ourself_and_handled}}
608 condition = ${if !match{$sender_host_name}{${rxquote:$sender_helo_name}\N$\N}}
609 message = HELO mismatch Forged HELO for ($sender_helo_name)
611 # This logic gives you a list of commonly forged domains in helo to reject against
613 warn set acl_m_frg = ${lookup{$sender_helo_name} \
614 nwildlsearch{/etc/exim4/helo-check} \
615 {${if eq{$value}{}{$sender_helo_name}{$value}}}{}}
617 # This is a failsafe in case DNS fails - we defer instead of hard reject if they
618 # say helo as a name in the list but we can't look them up
620 defer !hosts = +debianhosts
621 !acl = acl_spamlovers
622 condition = ${if !eq{$acl_m_frg}{}}
623 condition = ${if eq{$sender_host_name}{}}
624 condition = ${if !eq{$host_lookup_failed}{1}}
625 message = Access temporarily denied. Resolve failed PTR for $sender_host_address
627 # If DNS works, go ahead and reject them
629 drop !hosts = +debianhosts
630 !acl = acl_spamlovers
631 condition = ${if and { {!eq{$acl_m_frg}{}}{!match{$sender_host_name}{${rxquote:$acl_m_frg}\N$\N}}}}
632 message = HELO mismatch Forged HELO for ($sender_helo_name)
634 # disabled accounts don't even get local mail.
635 deny domains = +virtual_domains
636 condition = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}\
637 {${lookup{${extract{1}{-}{$local_part}}}lsearch{${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}{true}{false}}}\
639 message = ${lookup{${extract{1}{-}{$local_part}}}lsearch{${extract{directory}{VDOMAINDATA}{${value}/mail-disable}}}{$value}}
641 deny local_parts = lsearch;/var/lib/misc/$primary_hostname/mail-disable
642 domains = +local_domains
643 message = ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-disable}{$value}}
645 deny domains = +virtual_domains
646 local_parts = ${if exists {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
647 {${extract{directory}{VDOMAINDATA}{${value}/localonly}}}\
649 hosts = !+debianhosts
650 message = mail for <$local_part@$domain> only accepted from debian.org machines
652 # Accept if the source is local SMTP (i.e. not over TCP/IP).
653 # We do this by testing for an empty sending host field.
656 deny domains = +handled_domains
657 local_parts = ^[.] : ^.*[@%!/|]
659 deny domains = !+handled_domains
660 local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
662 deny condition = ${lookup{$sender_address_local_part}lsearch{/etc/exim4/localusers}{true}}
663 sender_domains= +local_domains
664 hosts = !+debianhosts
665 message = mail from <$sender_address> not allowed externally
667 deny sender_domains= +virtual_domains
668 condition = ${if exists {${extract{directory}{VSENDERDOMAINDATA}{${value}/localusers}}}}
669 condition = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VSENDERDOMAINDATA}{${value}/localusers}}}{true}}
670 hosts = !+debianhosts
671 message = mail from <$sender_address> not allowed externally
673 deny sender_domains= +virtual_domains
674 condition = ${if exists {${extract{directory}{VSENDERDOMAINDATA}{${value}/neversenders}}}}
675 condition = ${lookup{$sender_address_local_part}lsearch{${extract{directory}{VSENDERDOMAINDATA}{${value}/neversenders}}}{true}}
676 message = no mail should ever come from <$sender_address>
678 warn condition = ${if eq{$acl_m_prf}{localonly}}
679 set acl_m_lrc = ${if eq{$acl_m_lrc}{}{$local_part@$domain}{$acl_m_lrc, $local_part@$domain}}
681 <%- if @is_packagesmaster -%>
682 warn condition = ${if eq {$acl_m_prf}{PackagesMail}}
683 condition = ${if eq {$sender_address}{$local_part@$domain}}
684 message = X-Packages-FromTo-Same: yes
687 deny condition = ${if !eq {$acl_m_prf}{PopconMail}}
690 warn !hosts = +debianhosts
691 condition = ${if !eq {$acl_m_prf}{PopconMail}}
692 condition = ${if >{${eval:$acl_c_scr+0}}{0}}
693 ratelimit = 10 / 60m / per_rcpt / strict / $sender_host_address
694 log_message = Sender rate $sender_rate / $sender_rate_period (limit: $sender_rate_limit)
696 defer !hosts = +debianhosts
697 condition = ${if !eq {$acl_m_prf}{PopconMail}}
698 condition = ${if >{${eval:$acl_c_scr+0}}{0}}
699 ratelimit = 10 / 60m / per_rcpt / $sender_host_address
700 message = slow down (no reverse dns, mismatched ehlo, dialup, or in blacklists)
702 <%- if has_variable?("policydweight") && @policydweight -%>
703 # Check with policyd-weight
704 warn !hosts = +debianhosts
705 condition = ${if !eq {$acl_m_prf}{PopconMail}}
706 set acl_m_pw = ${readsocket{inet:127.0.0.1:12525}\
707 {request=smtpd_access_policy\n\
708 protocol_state=RCPT\n\
709 protocol_name=${uc:$received_protocol}\n\
710 helo_name=$sender_helo_name\n\
711 queue_id=$message_exim_id\n\
712 sender=$sender_address\n\
713 recipient=$local_part@$domain\n\
714 recipient_count=$rcpt_count\n\
715 client_address=$sender_host_address\n\
716 client_name=$sender_host_name\n\
717 reverse_client_name=$sender_host_name\n\
718 instance=$sender_host_address.$sender_address.$sender_helo_name\n\n}\
719 {20s}{\n}{socket failure}}
721 # Defer on socket error
722 defer !hosts = +debianhosts
723 condition = ${if !eq {$acl_m_prf}{PopconMail}}
724 condition = ${if eq{$acl_m_pw}{socket failure}}
725 message = Cannot connect to policyd-weight. Please try again later.
727 # Set proposed action to $acl_m_act and message to $acl_m_mes
728 warn !hosts = +debianhosts
729 condition = ${if !eq {$acl_m_prf}{PopconMail}}
730 set acl_m_mes = ${extract{action}{$acl_m_pw}}
731 set acl_m_act = ${sg{$acl_m_pw}{\Naction=[^ ]+ (.*)\n\n\N}{\$1}}
733 # Add X-policyd-weight header line to message
734 warn !hosts = +debianhosts
735 condition = ${if !eq {$acl_m_prf}{PopconMail}}
737 condition = ${if eq{$acl_m_act}{PREPEND}}
739 # Write log message, if policyd-weight can't run checks
740 warn !hosts = +debianhosts
741 condition = ${if !eq {$acl_m_prf}{PopconMail}}
742 log_message = policyd-weight message: $acl_m_mes
743 condition = ${if eq{$acl_m_act}{DUNNO}}
745 # Deny mails which policyd-weight thinks are spam
746 deny !hosts = +debianhosts
747 condition = ${if !eq {$acl_m_prf}{PopconMail}}
748 message = policyd-weight said: $acl_m_mes
749 condition = ${if eq{$acl_m_act}{550}}
751 # Defer messages when policyd-weight suggests so.
752 defer !hosts = +debianhosts
753 condition = ${if !eq {$acl_m_prf}{PopconMail}}
754 message = policyd-weight said: $acl_m_mes
755 condition = ${if eq{$acl_m_act}{450}}
758 <%- if @is_rtmaster -%>
759 warn condition = ${if eq{$acl_m_prf}{RTMail}}
760 set acl_m12 = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}{match{$local_part}{3520}}{match{$local_part}{3645}}} {RTMailRecipientHasSubaddress}}}}
761 # temporary hack because weasel screwed up and gave people an rt-3520@ address, which doesn't really work normally. and rt-3645
762 #set acl_m12 = ${if def:acl_m12 {$acl_m12} {${if or{{match{$local_part}{\N[^+]+\+\d+\N}}{match{$local_part}{\N[^+]+\+new\N}}} {RTMailRecipientHasSubaddress}}}}
766 <%- if has_variable?("greylistd") && @greylistd -%>
768 message = $sender_host_address is not yet authorized to deliver mail from <$sender_address> to <$local_part@$domain>.
769 log_message = greylisted.
770 local_parts = ${if match_domain{$domain}{+virtual_domains}\
771 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}\
772 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/grey_users}}}{$local_part}{}}}{}}}\
773 {${lookup{$local_part}lsearch{/etc/exim4/grey_users}{$local_part}{}} : \
774 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-greylist}{$local_part}{}}}}
776 !hosts = : +debianhosts : WHITELIST : \
777 ${if exists {/etc/greylistd/whitelist-hosts}\
778 {/etc/greylistd/whitelist-hosts}{}} : \
779 ${if exists {/var/lib/greylistd/whitelist-hosts}\
780 {/var/lib/greylistd/whitelist-hosts}{}}
781 condition = ${if !eq {$acl_m_prf}{PopconMail}}
783 domains = +handled_domains
784 condition = ${readsocket{/var/run/greylistd/socket}\
786 $sender_host_address \
788 $local_part@$domain}\
791 <%- elsif has_variable?("postgrey") && @postgrey -%>
792 # next three are greylisting, inspired by http://www.bebt.de/blog/debian/archives/2006/07/30/T06_12_27/index.html
793 # this adds acl_m_grey if there isn't one (so unique per message)
796 !hosts = : +debianhosts : WHITELIST
797 condition = ${if !eq {$acl_m_prf}{PopconMail}}
798 condition = ${if ! def:acl_m_grey}
799 set acl_m_grey = $pid.$tod_epoch.$sender_host_port
801 # and defers the message if postgrey thinks it should be defered ...
804 !hosts = : +debianhosts : WHITELIST
805 condition = ${if !eq {$acl_m_prf}{PopconMail}}
807 domains = +handled_domains
808 local_parts = GREYLIST_LOCAL_PARTS
809 set acl_m_pgr = request=smtpd_access_policy\n\
810 protocol_state=RCPT\n\
811 protocol_name=${uc:$received_protocol}\n\
812 instance=${acl_m_grey}\n\
813 helo_name=${sender_helo_name}\n\
814 client_address=${sender_host_address}\n\
815 client_name=${sender_host_name}\n\
816 sender=${sender_address}\n\
817 recipient=$local_part@$domain\n\n
818 set acl_m_pgr = ${sg{\
819 ${readsocket{/var/run/postgrey/socket}{$acl_m_pgr}\
820 {5s}{}{action=DUNNO}}\
822 message = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
823 log_message = greylisted.
824 condition = ${if eq{${uc:${substr{0}{5}{$acl_m_pgr}}}}{DEFER}}
826 # ... or adds a header with information about how long the delay was
829 !hosts = : +debianhosts : WHITELIST
830 condition = ${if !eq {$acl_m_prf}{PopconMail}}
832 domains = +handled_domains
833 local_parts = GREYLIST_LOCAL_PARTS
834 condition = ${if eq{${uc:${substr_0_7:$acl_m_pgr}}}{PREPEND}}
835 message = ${sg{$acl_m_pgr}{^\\w+\\s*}{}}
838 deny hosts = ${if exists{/etc/exim4/host_blacklist}{/etc/exim4/host_blacklist}{}}
839 message = I'm terribly sorry, but it seems you have been blacklisted
840 log_message = blacklisted IP
842 deny log_message = <$sender_address> is blacklisted
843 senders = ${if exists{/etc/exim4/blacklist}{/etc/exim4/blacklist}{}}
844 message = We have blacklisted <$sender_address>. Please stop mailing us
846 accept local_parts = +postmasterish
847 domains = +virtual_domains : +bsmtp_domains
849 <%- unless @use_smarthost -%>
850 deny message = host $sender_host_address is listed in $dnslist_domain; see $dnslist_text
851 dnslists = ${if match_domain{$domain}{+virtual_domains}\
852 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}\
853 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rbllist}}}{$value}{}}}{}}}\
854 {${lookup{$local_part}lsearch{/etc/exim4/rbllist}{$value}{}}}} : \
855 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rbl}{$value}{}}
856 domains = +handled_domains
857 !hosts = +debianhosts : WHITELIST
860 deny message = domain $sender_address_domain is listed in $dnslist_domain; see $dnslist_text
861 dnslists = ${if match_domain{$domain}{+virtual_domains}\
862 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}\
863 {${expand:${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/rhsbllist}}}{$value}{}}}}{}}}\
864 {${expand:${lookup{$local_part}lsearch{/etc/exim4/rhsbllist}{$value}{}}}}} : \
865 ${expand:${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-rhsbl}{$value}{}}}
866 domains = +handled_domains
867 !hosts = +debianhosts : WHITELIST
869 <%- unless @use_smarthost -%>
870 deny domains = +handled_domains
871 local_parts = ${if match_domain{$domain}{+virtual_domains}\
872 {${if exists {${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}\
873 {${lookup{$local_part}lsearch*{${extract{directory}{VDOMAINDATA}{${value}/callout_users}}}{$local_part}{}}}{}}}\
874 {${lookup{$local_part}lsearch{/etc/exim4/callout_users}{$local_part}{}}}} : \
875 ${lookup{$local_part}lsearch{/var/lib/misc/$primary_hostname/mail-callout}{$local_part}{}}
876 !hosts = +debianhosts : WHITELIST
877 !verify = sender/callout=90s,maxwait=300s
878 message = "Sender verification failed: $acl_verify_message"
881 <%- if @is_mailrelay -%>
882 accept domains = +mailhubdomains
884 verify = recipient/callout=30s,defer_ok,use_sender,no_cache
887 accept domains = +handled_domains
889 verify = recipient/defer_ok
891 accept hosts = +debianhosts
893 accept authenticated = *
895 deny message = relay not permitted
900 accept verify = certificate
901 accept hosts = +debianhosts
903 discard condition = ${if <{$message_size}{MAX_SCAN_SIZE}}
904 condition = ${if eq {$acl_m_prf}{blackhole}}
905 set acl_m_srb = ${perl{surblspamcheck}}
906 condition = ${if !eq{$acl_m_srb}{false}}
907 log_message = discarded surbl message for $recipients
909 deny condition = ${if <{$message_size}{MAX_SCAN_SIZE}}
910 condition = ${if !eq {$acl_m_prf}{markup}}
911 condition = ${if !eq {$acl_m_prf}{PopconMail}}
912 set acl_m_srb = ${perl{surblspamcheck}}
913 condition = ${if !eq{$acl_m_srb}{false}}
914 log_message = $acl_m_srb
917 warn condition = ${if <{$message_size}{MAX_SCAN_SIZE}}
918 condition = ${if eq {$acl_m_prf}{markup}}
919 set acl_m_srb = ${perl{surblspamcheck}}
920 condition = ${if !eq{$acl_m_srb}{false}}
921 message = X-Surbl-Hit: $primary_hostname: $acl_m_srb
927 deny condition = ${if eq{$acl_m_prf}{localonly}}
928 message = mail for $acl_m_lrc is only accepted internally
933 #!!# ACL that is used after the DATA command
936 # Some people put from postmaster@something.debian.org in the From
937 # header. Take their crack pipe away.
938 drop condition = ${if match{${lc:$h_From:}}{\Npostmaster@([^.]+\.)?debian\.org\N}}
940 <%- if @is_rtmaster -%>
941 deny condition = ${if eq {$acl_m_prf}{RTMail}}
942 condition = ${if and{{!match {${lc:$rh_Subject:}} {debian rt}} \
943 {!match {${lc:$rh_Subject:]}} {\N\[rt.debian.org \N}} \
944 {!match {$acl_m12}{RTMailRecipientHasSubaddress}}}}
945 message = messages to the Request Tracker system require a subject tag or a subaddress
948 <%- if @is_packagesqamaster -%>
949 deny !hosts = +debianhosts
950 condition = ${if eq {$acl_m_prf}{PTSMail}}
951 condition = ${if !def:h_X-PTS-Approved:}
952 message = messages to the PTS require an X-PTS-Approved header
955 deny condition = ${if eq {$acl_m_prf}{DBSignedMail}}
956 condition = ${if and {{!match {$message_body}{PGP MESSAGE}} \
957 {!match {$message_body}{PGP SIGNED MESSAGE}} \
958 {!match {$message_body}{PGP SIGNATURE}} \
959 {!match {$header_content-type:}{multipart/signed}} \
960 {!match {$header_content-type:}{pgp}} \
963 message = Mail to this address needs to be PGP-signed
965 accept verify = certificate
966 accept hosts = +debianhosts
968 deny condition = ${if !eq {$acl_m_prf}{PopconMail}}
969 !verify = header_syntax
970 message = Invalid header syntax: $acl_verify_message
972 # RFC 822 and 2822 say that headers must be ASCII. This kinda emulates
973 # postfix's strict_7bit_headers option, but only checks a few common problem
974 # headers, as there doesn't appear to be an easy way to check them all.
976 condition = ${if or {{match {$rh_Subject:}{[\200-\377]}}\
977 {match {$rh_To:}{[\200-\377]}}\
978 {match {$rh_From:}{[\200-\377]}}\
979 {match {$rh_Cc:}{[\200-\377]}}}}
980 condition = ${if !eq {$acl_m_prf}{PopconMail}}
981 message = improper use of 8-bit data in message header: message rejected
984 condition = ${if match {$rh_Subject:}{[^[:print:]]\{8\}}}
985 condition = ${if !eq {$acl_m_prf}{PopconMail}}
986 message = Your mailer is not RFC 2047 compliant: message rejected
988 <%- if has_variable?("clamd") && @clamd -%>
989 discard condition = ${if eq {$acl_m_prf}{blackhole}}
991 log_message = discarded malware message for $recipients
993 deny condition = ${if !eq {$acl_m_prf}{markup}}
994 condition = ${if !eq {$acl_m_prf}{PopconMail}}
996 message = malware detected: $malware_name: message rejected
998 warn condition = ${if eq {$acl_m_prf}{markup}}
1000 message = X-malware detected: $malware_name
1004 discard condition = ${if <{$message_size}{MAX_SCAN_SIZE}}
1005 condition = ${if eq {$acl_m_prf}{blackhole}}
1006 set acl_m_srb = ${perl{surblspamcheck}}
1007 condition = ${if !eq{$acl_m_srb}{false}}
1008 log_message = discarded surbl message for $recipients
1010 deny condition = ${if <{$message_size}{MAX_SCAN_SIZE}}
1011 condition = ${if !eq {$acl_m_prf}{markup}}
1012 condition = ${if !eq {$acl_m_prf}{PopconMail}}
1013 set acl_m_srb = ${perl{surblspamcheck}}
1014 condition = ${if !eq{$acl_m_srb}{false}}
1015 log_message = $acl_m_srb
1016 message = $acl_m_srb
1018 warn condition = ${if <{$message_size}{MAX_SCAN_SIZE}}
1019 condition = ${if eq {$acl_m_prf}{markup}}
1020 set acl_m_srb = ${perl{surblspamcheck}}
1021 condition = ${if !eq{$acl_m_srb}{false}}
1022 message = X-Surbl-Hit: $primary_hostname: $acl_m_srb
1025 # Check header_sender except for survey@popcon.d.o
1026 deny condition = ${if !eq{$acl_m_prf}{PopconMail}}
1027 !verify = header_sender
1028 message = No valid sender found in the From:, Sender: and Reply-to: headers
1030 <%- if @is_packagesmaster -%>
1031 deny message = Congratulations, you scored $spam_score points.
1032 log_message = spam: $spam_score points.
1033 condition = ${if eq {$acl_m_prf}{PackagesMail}}
1035 !verify = certificate
1036 !hosts = +debianhosts
1037 condition = ${if <{$message_size}{MAX_SCAN_SIZE}}
1038 spam = pkg_user : true
1039 condition = ${if >{$spam_score_int}{59}}
1046 ######################################################################
1047 # REWRITE CONFIGURATION #
1048 ######################################################################
1054 \N^buildd_(.*)@fasolo\.debian\.org$\N buildd_$1@buildd.debian.org T
1055 *@debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1056 *@people.debian.org ${lookup{$1}cdb{/var/lib/misc/${primary_hostname}/mail-forward.cdb}{$value}fail} T
1057 #*@${primary_hostname} "${if exists{/etc/exim4/email-addresses}{${lookup{$1}lsearch{/etc/exim4/email-addresses}{$value}fail}}fail}" fFs
1060 #!!#######################################################!!#
1061 #!!# Here follow routers created from the old routers, #!!#
1062 #!!# for handling non-local domains. #!!#
1063 #!!#######################################################!!#
1069 ######################################################################
1070 # ROUTERS CONFIGURATION #
1071 # Specifies how addresses are handled #
1072 ######################################################################
1073 # ORDER DOES MATTER #
1074 # An address is passed to each in turn until it is accepted. #
1075 ######################################################################
1077 <%- if @is_mailrelay -%>
1079 debug_print = "R: relay_manualroute for $local_part@$domain"
1080 driver = manualroute
1081 domains = +mailhubdomains
1082 transport = ${if forany{${lookup dnsdb{>: mxh=$domain}}}\
1083 {match_domain{$item}{+single_domain_mx}}\
1084 {remote_smtp_single_domain}{remote_smtp}\
1086 route_data = ${lookup{$domain}lsearch{/etc/exim4/manualroute}}
1087 require_files = /etc/exim4/manualroute
1091 debug_print = "R: bsmtp for $local_part@$domain"
1092 driver = manualroute
1093 domains = +bsmtp_domains
1094 require_files = /etc/exim4/bsmtp
1095 route_list = * ${extract{file}{\
1096 ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1100 # This router routes to remote hosts over SMTP by explicit IP address,
1101 # given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
1102 # require this facility, which is why it is enabled by default in Exim.
1104 debug_print = "R: ipliteral for $local_part@$domain"
1106 domains = !+handled_domains
1107 transport = remote_smtp
1108 ignore_target_hosts = +reservedaddrs
1110 <%- if @use_smarthost -%>
1112 debug_print = "R: smarthost for $local_part@$domain"
1113 driver = manualroute
1114 domains = !+handled_domains
1115 transport = remote_smtp_smarthost
1116 route_list = * <%= @smarthost %>
1117 host_find_failed = defer
1118 same_domain_copy_routing = yes
1122 # This router routes to remote hosts over SMTP using a DNS lookup.
1123 # Ignore reserved network responses, including localhost.
1125 debug_print = "R: dnslookup for $local_part@$domain"
1127 domains = !+handled_domains
1128 transport = ${if forany{${lookup dnsdb{>: mxh=$domain}}}\
1129 {match_domain{$item}{+single_domain_mx}}\
1130 {remote_smtp_single_domain}{remote_smtp}\
1132 ignore_target_hosts = +reservedaddrs
1136 debug_print = "R: postmasterish for $local_part@$domain"
1141 local_parts = +postmasterish
1142 domains = +virtual_domains : +bsmtp_domains
1143 data = debian-admin@debian.org
1144 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1146 # This router handles aliasing using a traditional /etc/aliases file.
1147 # If any of your aliases expand to pipes or files, you will need to set
1148 # up a user and a group for these deliveries to run under. You can do
1149 # this by uncommenting the "user" option below (changing the user name
1150 # as appropriate) and adding a "group" option if necessary.
1153 debug_print = "R: system_aliases for $local_part@$domain"
1157 data = ${lookup{$local_part}lsearch*{/etc/aliases}}
1158 domains = +local_domains
1159 file_transport = address_file
1160 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1161 pipe_transport = address_pipe
1162 retry_use_local_part
1164 # This router handles forwarding using traditional .forward files.
1165 # It also allows mail filtering when a forward file starts with the
1166 # string "# Exim filter": to disable filtering, uncomment the "filter"
1167 # option. The check_ancestor option means that if the forward file
1168 # generates an address that is an ancestor of the current one, the
1169 # current one gets passed on instead. This covers the case where A is
1170 # aliased to B and B has a .forward file pointing to A.
1172 # For standard Debian setup of one group per user, it is acceptable---normal
1173 # even---for .forward to be group writable. If you have everyone in one
1174 # group, you should comment out the "modemask" line. Without it, the Exim
1175 # default of 022 will apply, which is probably what you want.
1178 debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1183 directory_transport = address_directory
1184 domains = +local_domains
1185 # filter - I have disabled filtering to force users to use .forward-foo files
1186 # or procmail. This will make it easier to move mailers in the future
1188 # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1189 # also checks if the .forward-bar exists, if not then it uses
1190 # .forward-default instead.
1191 file = $home/.forward\
1192 ${if eq{}{$local_part_suffix}{}{\
1193 ${if exists {${home}/.forward${local_part_suffix}} \
1194 {${local_part_suffix}}{-default}}\
1197 file_transport = address_file
1198 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1199 local_part_suffix = -*
1200 local_part_suffix_optional
1202 pipe_transport = address_pipe
1203 reply_transport = address_reply
1204 require_files = $home
1205 router_home_directory = ${lookup passwd{$local_part}{${extract{5}{:}{$value}}}fail}
1208 # This is a sendmailesque alias file lookup
1210 debug_print = "R: virt_aliases for $local_part@$domain"
1214 data = ${if exists{\
1215 ${extract{directory}{VDOMAINDATA}{${value}/aliases}}}\
1216 {${lookup{$local_part}lsearch*{\
1217 ${extract{directory}{VDOMAINDATA}{$value/aliases}}\
1219 directory_transport = address_directory
1220 domains = +virtual_domains
1221 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1222 cannot_route_message = Unknown user
1223 group = ${extract{group}{VDOMAINDATA}}
1224 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1225 pipe_transport = address_pipe
1226 qualify_preserve_domain
1227 retry_use_local_part
1228 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1229 transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1230 user = ${extract{user}{VDOMAINDATA}}
1232 # No direct match, so try doing a regex match if there's an
1235 debug_print = "R: virt_aliases_regex for $local_part$local_part_suffix@$domain"
1239 data = ${if exists{\
1240 ${extract{directory}{VDOMAINDATA}{${value}/aliases.regex}}}\
1241 {${lookup{$local_part}nwildlsearch*{\
1242 ${extract{directory}{VDOMAINDATA}{$value/aliases.regex}}\
1244 directory_transport = address_directory
1245 domains = +virtual_domains
1246 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1247 cannot_route_message = Unknown user
1248 group = ${extract{group}{VDOMAINDATA}}
1249 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1250 pipe_transport = address_pipe
1251 qualify_preserve_domain
1252 retry_use_local_part
1253 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1254 transport_home_directory = ${extract{directory}{VDOMAINDATA}}
1255 user = ${extract{user}{VDOMAINDATA}}
1258 debug_print = "R: userforward for $local_part${local_part_suffix}@$domain"
1262 directory_transport = address_directory
1263 domains = +local_domains
1264 # filter - I have disabled filtering to force users to use .forward-foo files
1265 # or procmail. This will make it easier to move mailers in the future
1267 # This bit does the qmailesque extension names, foo-bar@ is .forward-foo it
1268 # also checks if the .forward-bar exists, if not then it uses
1269 # .forward-default instead.
1270 file = $home/.forward\
1271 ${if eq{}{$local_part_suffix}{}{\
1272 ${if exists {${home}/.forward${local_part_suffix}} \
1273 {${local_part_suffix}}{-default}}\
1276 file_transport = address_file
1277 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1278 local_part_suffix = -*
1279 local_part_suffix_optional
1281 pipe_transport = address_pipe
1282 reply_transport = address_reply
1283 require_files = $home
1286 # This delivers to procmail
1288 debug_print = "R: procmail for $local_part@$domain"
1291 domains = +local_domains
1292 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1293 local_part_suffix = -*
1294 local_part_suffix_optional
1297 require_files = $local_part:$home/.procmailrc
1298 transport = procmail_pipe
1299 transport_current_directory = $home
1301 # This driver delivers to the LDAP generated alias file.
1303 debug_print = "R: ldap_aliases for $local_part@$domain"
1307 data = ${if exists{/var/lib/misc/$primary_hostname/user-forward.cdb}\
1308 {${lookup{$local_part}cdb\
1309 {/var/lib/misc/$primary_hostname/user-forward.cdb}}}}
1310 domains = +local_domains
1311 file_transport = address_file
1312 local_part_suffix = -*
1313 local_part_suffix_optional
1314 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1315 pipe_transport = address_pipe
1316 retry_use_local_part
1318 # This director matches local user mailboxes.
1320 debug_print = "R: localuser for $local_part@$domain"
1323 domains = +local_domains
1324 local_part_suffix = -*
1325 local_part_suffix_optional
1326 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1327 # Disable if the user has never logged in
1328 require_files = $home
1329 transport = local_delivery
1332 # Now we begin the Virtual Domain configuration
1333 # Everything before here should apply only to the local domains with a
1336 <%- if @is_packagesmaster -%>
1337 # This router delivers for packages.d.o
1339 debug_print = "R: packages for $local_part@$domain"
1341 file_transport = address_file
1342 pipe_transport = address_pipe
1343 domains = packages.debian.org
1344 require_files = /srv/packages.debian.org/conf/maintainer
1345 data = ${lookup{$local_part}cdb{/srv/packages.debian.org/conf/maintainer.cdb}}
1346 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1347 transport_home_directory = /srv/packages.debian.org/mail
1348 transport_current_directory = /srv/packages.debian.org/mail
1350 retry_use_local_part
1354 <%- if @is_rtmaster -%>
1355 # This router delivers for rt.d.o
1356 rt_force_new_verbose:
1357 debug_print = "R: rt for $local_part+new@$domain"
1359 domains = rt.debian.org
1360 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1361 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1362 local_part_suffix = +new
1363 pipe_transport = rt_pipe
1364 data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1365 headers_remove = Subject
1366 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?is)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1368 # FIXME: figure out how to generalize this approach so that all of the following would work
1369 # - rt+NNNN@rt.debian.org : attach correspondence to ticket (verbose)
1370 # - rt+NNNN-quiesce@rt.debian.org : attach correspondence to ticket (quiesce)
1371 # - rt+NNNN-<action>@rt.debian.org : attach correspondence to ticket (some action)
1372 # requires modification to custom condition in 'scrips'
1373 rt_force_new_quiesce:
1374 debug_print = "R: rt for $local_part+new-quiesce@$domain"
1376 domains = rt.debian.org
1377 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1378 local_parts = ${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1379 local_part_suffix = +new-quiesce
1380 pipe_transport = rt_pipe
1381 data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-comment}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --action ${if match{$local_part}{.*-comment.*}{comment}{correspond}}"
1382 headers_remove = Subject
1383 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nX-RT-Mode: quiesce\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?is)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1386 debug_print = "R: rt for $local_part@$domain"
1388 domains = rt.debian.org
1389 require_files = /usr/bin/rt-mailgate : RT_QUEUE_MAP
1390 local_parts = ${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}{$local_part}{}}
1391 local_part_suffix = +*
1392 local_part_suffix_optional
1393 pipe_transport = rt_pipe
1394 data = "|/usr/bin/rt-mailgate --queue '${lookup{${sg{$local_part}{-(comment|done)}{}}}lsearch{RT_QUEUE_MAP}}' --url https://rt.debian.org/ --ca-file /etc/ssl/ca-debian/ca-certificates.crt --extension ticket --action ${if match{$local_part}{.*-comment.*}{comment}{${if match{$local_part}{.*-done.*}{correspond-resolve}{correspond}}}}"
1395 headers_remove = Subject
1396 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}\nSubject: ${if and {{first_delivery}{match {$h_subject:}{(?i)(.*?)\\\\[?debian rt\\\\]?[:\\s]*(.*)}}} {$1$2}{$h_subject:}}"
1399 # Exim fails the router if it can't change to the user/group for delivery
1400 # during verification. So we have to separate the cases of verifying
1401 # the virts, and delivering to them. blah.
1404 debug_print = "R: virt_direct for $local_part@$domain"
1410 directory_transport = address_directory
1411 domains = +virtual_domains
1412 local_part_suffix = -*
1413 local_part_suffix_optional
1414 file = $home/.forward-\
1415 ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1417 file_transport = address_file
1418 pipe_transport = address_pipe
1419 reply_transport = address_reply
1420 retry_use_local_part
1421 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1422 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1425 # This is a qmailesque deliver into a directory of .forward files
1427 debug_print = "R: virt_direct for $local_part@$domain"
1433 directory_transport = address_directory
1434 domains = +virtual_domains
1435 file = $home/.forward-\
1436 ${if exists {${home}/.forward-${local_part}}{${local_part}}\
1438 file_transport = ${if eq {${extract{group_writable}{VDOMAINDATA}}}{true}{address_file_group}{address_file}}
1439 group = ${extract{group}{VDOMAINDATA}}
1440 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1442 local_part_suffix = -*
1443 local_part_suffix_optional
1444 pipe_transport = address_pipe
1445 reply_transport = address_reply
1446 retry_use_local_part
1447 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1448 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1450 user = ${extract{user}{VDOMAINDATA}}
1451 #debug_print = .forward-${if exists {${home}/.forward-${local_part}} {${local_part}} {default}}
1453 # This router delivers to the LDAP generated mail-forward file.
1454 # It's only really useful for debian.org
1456 debug_print = "R: virt_users for $local_part@$domain"
1460 router_home_directory = ${extract{directory}{VDOMAINDATA}}
1461 transport_current_directory = ${extract{directory}{VDOMAINDATA}}
1462 user = ${extract{user}{VDOMAINDATA}}
1463 group = ${extract{group}{VDOMAINDATA}}
1464 # Manually construct the forwarding address, preserving the
1465 # local_part_suffix if the remote host is master.
1466 data = ${if and {{exists{${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}\
1467 {! eq {${lookup{$local_part}cdb\
1468 {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}\
1470 {${local_part:${lookup{$local_part}cdb\
1471 {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}\
1472 ${if eq {${domain:${lookup{$local_part}cdb\
1473 {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}{master.debian.org}{$local_part_suffix} {}}\
1475 ${domain:${lookup{$local_part}cdb\
1476 {${extract{directory}{VDOMAINDATA}{${value}/mail-forward.cdb}}}}}}}
1477 domains = +virtual_domains
1478 file_transport = address_file
1479 headers_add = "Delivered-To: ${local_part}${local_part_suffix}@${domain}"
1480 pipe_transport = address_pipe
1481 local_part_suffix = -*
1482 local_part_suffix_optional
1483 retry_use_local_part
1485 <%- if @is_bugsmx -%>
1486 # This router delivers for bugs.d.o
1488 debug_print = "R: bugs for $local_part@$domain"
1490 transport = bugs_pipe
1491 domains = bugs.debian.org
1492 cannot_route_message = Unknown or archived bug
1493 require_files = /srv/bugs.debian.org/mail/run-procmail
1495 local_parts = ${if match\
1497 {\N^(\d+)(\d{2})(?:-(?:(?:submit|maintonly|quiet|forwarded|done|close|request|submitter)|(?:unsubscribe|ignore|help|(?:sub(?:scribe|help|yes|approve|reject))|unsubyes|bounce|probe|approve|reject|setlistyes|setlistsilentyes).*))?$\N}\
1498 {${if exists{/srv/bugs.debian.org/spool/db-h/$2/$1$2.summary}\
1499 {$local_part}fail}}fail}
1501 ######################################################################
1502 # TRANSPORTS CONFIGURATION #
1503 ######################################################################
1504 # ORDER DOES NOT MATTER #
1505 # Only one appropriate transport is called for each delivery. #
1506 ######################################################################
1511 # This transport is used for local delivery to user mailboxes. On Debian
1512 # systems group mail is used so we can write to the /var/mail
1513 # directory. (The alternative, which most other unixes use, is to deliver
1514 # as the user's own group, into a sticky-bitted directory)
1516 debug_print = "T: local_delivery for $local_part@$domain"
1518 file = /var/mail/${local_part}
1521 no_mode_fail_narrower
1524 # This transport is used for handling pipe addresses generated by alias
1525 # or .forward files. It has a conventional name, since it is not actually
1526 # mentioned elsewhere in this configuration file. (A different name *can*
1527 # be specified via the "address_pipe_transport" option if you really want
1528 # to.) If the pipe generates any standard output, it is returned to the sender
1529 # of the message as a delivery error. Set return_fail_output instead if you
1530 # want this to happen only when the pipe fails to complete normally.
1533 debug_print = "T: address_pipe for $local_part@$domain"
1535 current_directory = ${home}
1536 environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1537 EXT=${substr_1:${local_part_suffix}}:\
1538 LOCAL=${local_part}${local_part_suffix}:\
1539 RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1543 # This transport is used for handling file addresses generated by alias
1544 # or .forward files. It has a conventional name, since it is not actually
1545 # mentioned elsewhere in this configuration file.
1548 debug_print = "T: address_file for $local_part@$domain"
1553 debug_print = "T: address_file_group for $local_part@$domain"
1557 directory_mode = 0770
1558 mode_fail_narrower = false
1560 # This transport is used for handling file addresses generated by alias
1561 # or .forward files if the path ends in "/", which causes it to be treated
1562 # as a directory name rather than a file name. Each message is then delivered
1563 # to a unique file in the directory. If instead you want all such deliveries to
1564 # be in the "maildir" format that is used by some other mail software,
1565 # uncomment the final option below. If this is done, the directory specified
1566 # in the .forward or alias file is the base maildir directory.
1568 # Should you want to be able to specify either maildir or non-maildir
1569 # directory-style deliveries, then you must set up yet another transport,
1570 # called address_directory2. This is used if the path ends in "//" so should
1571 # be the one used for maildir, as the double slash suggests another level
1572 # of directory. In the absence of address_directory2, paths ending in //
1573 # are passed to address_directory.
1576 debug_print = "T: address_directory for $local_part@$domain"
1584 # This transport is used for handling autoreplies generated by the filtering
1585 # option of the forwardfile director. It has a conventional name, since it
1586 # is not actually mentioned elsewhere in this configuration file.
1588 debug_print = "T: address_reply for $local_part@$domain"
1591 # This transport is used for delivering messages over SMTP connections.
1594 debug_print = "T: remote_smtp for $local_part@$domain"
1596 connect_timeout = 15s
1597 delay_after_cutoff = false
1598 tls_certificate = /etc/exim4/ssl/thishost.crt
1599 tls_privatekey = /etc/exim4/ssl/thishost.key
1601 remote_smtp_single_domain:
1602 debug_print = "T: remote_smtp_single_domain for $local_part@$domain"
1604 connect_timeout = 15s
1605 delay_after_cutoff = false
1607 tls_certificate = /etc/exim4/ssl/thishost.crt
1608 tls_privatekey = /etc/exim4/ssl/thishost.key
1610 <%- if @use_smarthost -%>
1611 remote_smtp_smarthost:
1612 debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
1614 delay_after_cutoff = false
1615 port = <%= @smarthost_port %>
1616 tls_tempfail_tryclear = false
1617 hosts_require_tls = <%= @smarthost %>
1618 tls_certificate = /etc/exim4/ssl/thishost.crt
1619 tls_privatekey = /etc/exim4/ssl/thishost.key
1621 # Send the message to procmail
1623 debug_print = "T: procmail_pipe for $local_part@$domain"
1625 command = /usr/bin/procmail -a ${substr_1:${local_part_suffix}}
1627 user = ${local_part}
1630 debug_print = "T: bsmtp for $local_part@$domain"
1637 user = ${extract{user}{\
1638 ${lookup{$domain}partial-lsearch{/etc/exim4/bsmtp}\
1642 <%- if @is_bugsmx -%>
1644 debug_print = "T: bugs_pipe for $local_part@$domain"
1646 command = /srv/bugs.debian.org/mail/run-procmail
1647 environment = "EXTENSION=${substr_1:${local_part_suffix}}:\
1648 EXT=${substr_1:${local_part_suffix}}:\
1649 LOCAL=${local_part}${local_part_suffix}:\
1650 RECIPIENT=${local_part}${local_part_suffix}@${domain}"
1656 <%- if @is_rtmaster -%>
1658 debug_print = "T: rt_pipe for $local_part${local_part_suffix}@$domain"
1661 environment = EXTENSION=${substr_1:${local_part_suffix}}
1662 allow_commands = /usr/bin/rt-mailgate
1666 ######################################################################
1667 # RETRY CONFIGURATION #
1668 ######################################################################
1670 # This single retry rule applies to all domains and all errors. It specifies
1671 # retries every 15 minutes for 2 hours, then increasing retry intervals,
1672 # starting at 2 hours and increasing each time by a factor of 1.5, up to 16
1673 # hours, then retries every 8 hours until 4 days have passed since the first
1676 # Domain Error Retries
1677 # ------ ----- -------
1682 debian.org * F,2h,10m; G,16h,2h,1.5; F,14d,8h
1683 * * senders=: F,2h,10m
1684 * rcpt_4xx F,2h,5m; F,4h,10m; F,4d,15m
1685 * * F,2h,15m; G,16h,2h,1.5; F,4d,8h
1687 # End of Exim 4 configuration