X-Git-Url: https://git.adam-barratt.org.uk/?a=blobdiff_plain;f=3rdparty%2Fmodules%2Fneutron%2Ftemplates%2Fn1kv.conf.erb;fp=3rdparty%2Fmodules%2Fneutron%2Ftemplates%2Fn1kv.conf.erb;h=dd9409432c68ee635894fa8172be5e1f7d873c28;hb=4631045ebb77ee8622f6fa09277a50c372bcc02e;hp=0000000000000000000000000000000000000000;hpb=3d4dc4fd9e59bd0e07646c99f6b356c7d9d859aa;p=mirror%2Fdsa-puppet.git

diff --git a/3rdparty/modules/neutron/templates/n1kv.conf.erb b/3rdparty/modules/neutron/templates/n1kv.conf.erb
new file mode 100644
index 000000000..dd9409432
--- /dev/null
+++ b/3rdparty/modules/neutron/templates/n1kv.conf.erb
@@ -0,0 +1,169 @@
+# This is the N1KV VEM configuration file.
+# <n1kv.conf> file contains all the configuration parameters for VEM operation.
+# Please find below a brief explanation of these parameters and their meaning.
+# Optional Parameters and Default Values of parameters are explicitly stated.
+# Note:
+# a)Mandatory parameters are needed for proper VEM operation.
+#   N1KV DP/DPA should start even if these are not specified.
+#   But there will be functional impact. For eg: in VSM connectivity
+# b)For any updates to parameters to take effect, you just need to execute
+#   'vemcmd reread config'. Its the least-disruptive way for changes to
+#   take effect. However for certain params, n1kv service need to be restarted.
+#    These parameter are stated explictly (restart_on_modify: YES).
+#
+
+#
+#<vsm-connection-params>
+#
+# TAG: switch-domain
+# Description:
+# Optional: No
+# Default: 1000
+# restart_on_modify: No
+switch-domain <%= @n1kv_vsm_domain_id %>
+
+# TAG: l3control-ipaddr
+# Description: IP Address of VSM Mgmt I/F
+# Optional: No
+# Default: 127.0.0.1
+# restart_on_modify: No
+l3control-ipaddr <%= @n1kv_vsm_ip %>
+
+# TAG: host-mgmt-intf
+# Description: Management interface of the Host
+# Optional: No (on N1KV, we need this
+#               for Host Identification on VSM).
+# Default: lo
+# restart_on_modify: Yes
+host-mgmt-intf <%= @host_mgmt_intf %>
+
+#<Port-Profile Mapping>
+# Description: Port-Profile mapping for all VEM managed Interfaces.
+# Optional: Yes
+# restart_on_modify: No
+#
+# Note: Do not specify Host Management Interface here.
+# We do yet support System Ports (Ports which need to be up all time: Post Reboot/VEM Upgrade).
+#
+# Format for physical ports:
+# phys <port-name> profile  <profile-name>
+#phys eth1 profile sys-uplink
+#phys eth2 profile uplink2
+
+<% @uplink_profile.each do |port, profile| -%>
+phys <%= port%> profile <%= profile%>
+<% end -%>
+
+# Format for non-vm virt ports. For instance: VTEP ports.
+# virt <port-name> profile <profile-name> [mode static|dhcp] [address <ipaddr>]
+#      [netmask <netmask ip>] [mac <macaddr>]
+# [] -->indicates optional parameters.
+#Eg:
+#virt vtep3 profile profint mode dhcp
+#virt vtep1 profile profint mode dhcp mac 00:11:22:33:44:55
+#virt vtep2 profile profint mode static address 192.168.2.91 netmask 255.255.255.0
+#virt vtep2 profile profint mode static address 192.168.2.91 netmask 255.255.255.0 mac 00:22:22:33:44:55
+
+<% @vtep_config.each do |port, params| -%>
+<% if params['ipmode'] == 'dhcp'  -%>
+virt <%= port%> profile <%= params['profile']%> mode dhcp
+<% else-%>
+virt <%= port%> profile <%= params['profile']%> mode static address <%= params['ipaddress']%> netmask <%= params['netmask']%>
+<% end -%>
+<% end -%>
+
+# TAG: uvem-ovs-brname
+# Description: Default Open VSwitch Bridge Name
+# Optional: YES.
+# Default: n1kvdvs
+# restart_on_modify: Yes
+# Format:
+# uvem-ovs-brname n1kvdvs
+uvem-ovs-brname br-int
+
+# TAG: portdb
+# Description: PortDB (ovs|vem)
+# Optional: YES.
+# Default: ovs
+# restart_on_modify: Yes
+# Format:
+# portdb vem
+portdb <%= @portdb %>
+
+# TAG: node-type
+# Description: Type of Node: 'compute' (or) 'neutron'
+# Optional: YES.
+# Default: compute
+# restart_on_modify: No
+# Format:
+# node-type compute
+node-type <%= @node_type %>
+
+# The below parameters are not commonly modified.
+#
+#
+#<system-port-profile-Info>
+# Description:  System Port Profiles.
+# Optional: Yes (If there are no System Interfaces: Mgmt I/F etc)
+# restart_on_modify: No
+#
+#Trunk Profile Format
+#profile <name> trunk <vlan>
+#profile <name> native-vlan <vlan>
+#profile <name> mtu <mtu-size>
+#
+#Access Profile
+#profile <name> access <vlan>
+#profile <name> mtu <mtu-size>
+
+# TAG: dp-np-threads
+# Description: Number of datapath threads to process normal priority packets
+# Optional: YES
+# Default: 4
+# restart_on_modify: Yes
+# Format: dp-np-threads <1..32>
+
+# TAG: dp-lp-threads
+# Description: Number of datapath threads to process low priority packets
+# Optional: YES
+# Default: 1
+# restart_on_modify: Yes
+# Format: dp-lp-threads <1..32>
+
+# TAG: dp-hp-threads
+# Description: Number of datapath threads to process high priority packets
+# Optional: YES
+# Default: 1
+# restart_on_modify: Yes
+# Format: dp-hp-threads <1..32>
+
+# TAG: dp-thread-sockets
+# Description: Number of packet sockets each datapath thread creates
+# Optional: YES
+# Default: 1
+# restart_on_modify: Yes
+# Format: dp-thread-sockets <1..16>
+
+# TAG: dp-thread-socket-rbuflen
+# Description: Receive buffer length of each packet socket
+# Optional: YES
+# Default: 8 MBytes
+# restart_on_modify: Yes
+# Format: dp-thread-socket-rbuflen <0..255>
+# Note: 0 - use system default
+
+# TAG: dp-thread-socket-rrnglen
+# Description: Rx-ring length of each packet socket
+# Optional: YES
+# Default: 4096
+# restart_on_modify: Yes
+# Format: dp-thread-socket-rrnglen <0..16384>
+# Note: 0 - disables memory map I/O
+
+# TAG: fastpath-flood
+# Description: Enable flood of broadcast and unknown pkts in KLM
+# Optional: YES
+# Default: disable
+# restart_on_modify: Yes
+# Format: fastpath-flood <enable|disable>
+fastpath-flood <%= @fastpath_flood %>