[ml2_cisco]

# (StrOpt) A short prefix to prepend to the VLAN number when creating a
# VLAN interface. For example, if an interface is being created for
# VLAN 2001 it will be named 'q-2001' using the default prefix.
#
# vlan_name_prefix = q-
# Example: vlan_name_prefix = vnet-

# (BoolOpt) A flag to enable round robin scheduling of routers for SVI.
# svi_round_robin = False

#
# (StrOpt) The name of the physical_network managed via the Cisco Nexus Switch.
# This string value must be present in the ml2_conf.ini network_vlan_ranges
# variable.
#
# managed_physical_network =
# Example: managed_physical_network = physnet1

# Cisco Nexus Switch configurations.
# Each switch to be managed by Openstack Neutron must be configured here.
#
# Cisco Nexus Switch Format.
# [ml2_mech_cisco_nexus:<IP address of switch>]
# <hostname>=<intf_type:port>       (1)
# ssh_port=<ssh port>               (2)
# username=<credential username>    (3)
# password=<credential password>    (4)
#
# (1) For each host connected to a port on the switch, specify the hostname
#     and the Nexus physical port (interface) it is connected to.
#     Valid intf_type's are 'ethernet' and 'port-channel'.
#     The default setting for <intf_type:> is 'ethernet' and need not be
#     added to this setting.
# (2) The TCP port for connecting via SSH to manage the switch. This is
#     port number 22 unless the switch has been configured otherwise.
# (3) The username for logging into the switch to manage it.
# (4) The password for logging into the switch to manage it.
#
# Example:
# [ml2_mech_cisco_nexus:1.1.1.1]
# compute1=1/1
# compute2=ethernet:1/2
# compute3=port-channel:1
# ssh_port=22
# username=admin
# password=mySecretPassword

<% nexus_config.each do |switch_hostname, switch_data| %>
[ML2_MECH_CISCO_NEXUS:<%= switch_data['ip_address'] %>]
<%- switch_data['servers'].each do|host_name, port| -%>
<%=host_name-%>=<%= port %>
<%- end -%>
ssh_port=<%= switch_data['ssh_port'] %>
username=<%= switch_data['username'] %>
password=<%= switch_data['password'] %>
<% end %>